Dr Mohamed Ali Sadakkathulla

 Position Senior Lecturer
 Org Unit Civil Engineering
 Email mmsadakk@civeng.adelaide.edu.au
 Telephone +61 8 8313 3968
 Location Floor/Room N2 ,  Engineering North ,   North Terrace
  • Qualifications

    ·         2000-PhD (Structural Engineering)-University of Adelaide, Adelaide

    ·         1987-MEngg (Structural Engg.) -First class with distinction-College of Engineering(Guindy), Anna University, Madras (India)

    ·         1984-BEng(Honours)(Civil Engineering)-First class honours Madurai University, Thiyagarajar College of Engineering, Madurai(India)

    Other professional qualifications and membership:

    2012-Graduate Certificate in Education (Higher Education)-成人大片(Australia)

    Member-American Concrete Institute (ACI) USA.

    Member-International Association of Bridge & Structural Engineering (IABSE), Zurich, Switzerland
     

     

  • Awards & Achievements

    ·         Awarded Raman Fellowship by the Council of Scientific and Industrial Research, India and worked as a visiting academic at the 成人大片 for 5 months in 2004.

    ·         Awarded the ADCOS Fellowship by the Australian Government for undertaking PhD

    ·         Awarded the University Grants Commission (UGC) Scholarship for M.E.(Structural Engineering) at Anna University Madras based on Graduate Aptitude Test in Engineering(GATE) score.

    Awarded the Telford Gold medal for the year 2013 by ICE(UK) for the best paper entitled “A generic unified reinforced concrete model”

     

     

     

     

  • Teaching Interests

    1. Structural Engineering design 2A&2B (2006-2008)

    2.Structural Engineering Design (2010, 2011,2012, 2013,2015)

    3. Prestressed Concrete Structures (2011,2012,2013,2014,2015)

    4. Structural Design 3 (Steel Structures) (2012,2013,2014,2015)

    5.Technology in Design for Archirecture Students (2009 &2011)

     

     

  • Publications

    REFEREED JOURNAL ARTICLES  

    1.     Fatemi,S.J., Mohamed Ali M.S. and Sheikh,A.H. (2016) “Load distribution for composite steel–concrete horizontally curved box girder bridge”,  Journal of Constructional Steel Research, Vol. 116 (2016):19–28.

    2.     Kashefi,K., Sheikh,A.H., Mohamed Ali,M.S., and Griffith,M.C.(2016). “An efficient modeling approach based on a rigorous cross-sectional analysis for analyzing box girder bridge superstructures”, Accepted for publication by Advances in Structural Engineering, 24/8/2015.

    3.     Fatemi,S.J., Sheikh,A.H. and Mohamed Ali M.S. (2015) “”, Advances in Structural Engineering 18(1):107-117.

    4.     *Albitar M, Mohamed Ali MS, , Drechsler M. (2015). “”, Construction and Building Materials,Vol.83:128-135.

    5.     *Albitar M,  , Mohamed Ali MS, Drechsler M. (2014). “”, KSCE Journal of Civil Engineering 19(5):1445-1455 .

    6.     *Knight, D., Visintin, P., Oehlers, D.J., Mohamed Ali, M.S.. (2014) "Simulation of RC Beams with Mechanically Fastened FRP Strips" Composite Structures, 114:99-106.

    7.     *Knight, D., Visintin, P., Oehlers, D.J., and Mohamed Ali M.S. (2014) “Short term partial interaction behaviour of RC beams with prestressed FRP and steel. ASCE Journal of Composites for Construction, Vol. 18 No. 1 Article number 04013029 Feb..

    8.     *Knight, D., Visintin, P., Oehlers, D.J. and Mohamed Ali M.S. (2014) “Simulating RC beams with unbonded FRP and steel prestressing tendons”. Composites: Part B, 60, April, pp392-399.

    9.     *Oehlers, D.J., Muhamad, R. and Mohamed Ali, M.S. (2013) “Serviceability Flexural Ductility of FRP and Steel RC Beams: a discrete rotation approach”. Construction and Building Materials, Vol. 49, Dec., pp974-984.

    10.  *Muhamad, R., Oehlers, D.J., and Mohamed, Ali, M.S. (2013) “Discrete rotation deflection of reinforced concrete beams at serviceability”. Proc. ICE Structures and Buildings(UK), Vol. 166, Issue 3, March, pp 111-124.

    11.  Akbar, I., Oehlers, D.J., and Mohamed Ali M.S. (2013). “The Effect of Steel Yielding on CFRP Plated Steel Member by Partial Interaction Theory”, Jurnal Teknologi (Sciences & Engineering) 61:3 (2013) 31–39

    12.  *Muhamad, R., Mohamed Ali, M.S., Oehlers, D.J., and Griffith, M.C., (2012) “The tension stiffening mechanism in reinforced concrete prisms”. International Journal of Advances in Structural Engineering. Vol. 15, Issue 12, pp2053-2069.

    13.  *Mohamed Ali M.S., Oehlers, D.J., Haskett, M., and Griffith, M.C.. (2012) “Discrete rotation in RC beams”.  Journal of Engineering Mechanics, ASCE, November, 138, 11, pp1317-1325.

    14.  Lucas, W., Oehlers, D.J.,  Mohamed Ali, M.S. and Griffith, M.C., (2012) “The FRP reinforced shear-friction mechanism”. Advances in Structural Engineering, Vol. 15, Issue 4, SI, April, pp615-623.

    15.  *Oehlers, D.J., Mohamed Ali M.S., Griffith, M.C., Haskett, M., and Lucas, W., (2012) “A generic unified reinforced concrete model”, Proc. ICE , Structures and Buildings, Vol. 165, Issue SB1, February, pp 27-49. TELFORD MEDAL.

    16.  Lucas, W., Oehlers, D.J. and Mohamed Ali M.S. (2011) “Formulation of a shear resistance mechanism for inclined cracks in RC beams”. ASCE Journal of Structural Engineering, Vol. 137, Issue 12, Dec.,  pp1480-1488.

    17.  Kashyap, J., Griffith, M.C., Mohamed Ali M.S. and Oehlers, D.J. (2011) “Prediction of load-slip behaviour of FRP retrofitted masonry”. ASCE Journal of Composites for Construction,  Vol. 15, Issue 6, Nov-Dec, pp943-951.

    18.  *Oehlers, D.J., Mohamed Ali M.S., Haskett, M., Lucas, W., Muhamad, R., and Visintin, P., (2011) “FRP reinforced concrete beams – a unified approach based on IC theory”. ASCE Composites for Construction , May/June, Vol. 15, No. 3, pp293-303.

    19.  *Oehlers, D.J., Haskett, M., and Mohamed Ali M.S.. (2011) “Design for moment redistribution in FRP plated RC beams”. Structural Engineering and Mechanics  Vol. 38, No. 6, June, pp 697-714.

    20.  Oehlers, D.J, Haskett, M., Mohamed Ali M.S., Lucas, W., and Muhamad, R., (2011) “Our obsession with curvature in reinforced concrete modelling”. Advances in Structural Engineering, Vol. 14, No. 3, pp 399-412.

    21.  *Muhamad, R., Mohamed Ali M.S., Oehlers, D.J. and Sheikh, A.H.. (2011) “Load-slip relationship of tension reinforcement in reinforced concrete members”. Engineering Structures, 33, pp1098-1106.

    22.  *Haskett, M., Oehlers, D.J., Mohamed Ali, M.S., and Sharma, S.K., (2011) “Evaluating the shear-friction resistance across sliding planes in concrete”. Engineering Structures, 33, pp 1357-1364.

    23.  *Haskett, M., Oehlers, D.J., Mohamed Ali M.S., and Sharma, S. K.. (2010) “The shear friction aggregate interlock resistance across sliding planes in concrete”. Magazine of Concrete Research, Vol. 62, Issue 12, December, pp 907-924.

    24.  Oehlers, D.J., Haskett, M., Mohamed Ali, M.S. and Griffith, M.C. (2010) “Moment redistribution in reinforced concrete beams”. Proceedings ICE, Structures and Buildings. Vol. 163, Issue 3, June, pp 165-176.

    25.  *Mohamed Ali, M.S., Oehlers, D.J., and Griffith, M.C. (2010) “The residual strength of confined concrete”, Advances in Structural Engineering,. Vol. 13, No. 4, pp603-618.

    26.  *Haskett, M., Oehlers, D.J., Mohamed Ali M.S. and Wu, C.. (2010) “Analysis of moment redistribution in FRP plated RC beams”. Journal of Composites in Construction, ASCE, Vol. 14, Issue 4, pp424-433, July/August.

    27.  Akbar, I., Oehlers, D.J., and Mohamed Ali M.S. (2010) “Derivation of the bond-slip characteristics for FRP plated steel members”. Journal of Constructional Steel Research, Vol. 66, Issue 8-9, Aug – Sept, pp 1047-1056.

    28.  *Haskett, M., Oehlers, D.J., and Mohamed Ali, M.S., (2010) “Design for moment redistribution in RC beams retrofitted with steel plates”. Advances in Structural Engineering. Vol. 13, No.2, pp 379-391

    29.  *Sharma, S.K., Mohamed Ali, M.S., Goldar, D. Sikdar, P.K (2010) “Investigation of intermediate crack debonding in FRP plated RC beams” . Journal of Advanced Materials. 42 (2), pp. 17-23.

    30.  *Haskett, M., Mohamed Ali M.S., Oehlers D.J., and Wu, C., (2009) “Influence of bond on the hinge rotation of FRP plated beams”, special edition of Advances in Structural Engineering, Vol. 12, No. 6, pp 833-843.

    31.  Haskett, M., Oehlers, D.J., Mohamed Ali and Wu, C. (2009) “Yield penetration hinge rotation in reinforced concrete beams”. ASCE Structural Journal, Vol. 135, Issue 2, Feb., 130-138.

    32.  Oehlers, D.J., Griffith, M.C. and Mohamed Ali, M.S. (2009) “Ductility components and limits of FRP plated RC structures”. Construction and Building Materials. Vol.23, Issue 4, Special issue, April 1538-1543.

    33.  Haskett, M., Oehlers, D.J., Mohamed Ali, M.S., and Wu, C., (2009) “Rigid body moment-rotation mechanism for reinforced concrete beam hinges” Engineering Structures, 31 (2009) 1032-1041.

    34.  *Mohamed Ali, M.S., Oehlers, D.J. and Griffith, M.C. (2008) “Simulation of plastic hinges in FRP plated RC beams”. ASCE, Composites for Construction, Vol.12, Issue 6, Nov-Dec, pp 617-625.

    35.  Daniell, J.E., Oehlers, D.J., Griffith, M.C., Mohamed Ali, M.S. and Ozbakkaloglu, T., (2008). “The softening rotation of reinforced concrete beams”, Engineering Structures, Vol. 30, 3159-3166.

    36.  Sharma, S.K, Mohamed Ali M.S., Goldar,D., and SikdarP.K.,(2008) “Investigation of Critical Diagonal Crack Debonding in FRP plated RC Beams" ,”  Composites, Part-B: Engineering , Vol.39 (3), pp. 570-584

    37.  *Mohamed Ali, M.S., Oehlers, D.J., and Griffith, M.C., (2008) “Shear transfer across cracks in FRP strengthened RC structures”, ASCE Journal of Composites in Construction, July/August, 416-424.

    38.  *Mohamed Ali, M.S., Oehlers, D.J., Griffith, M.C., and Seracino, R., (2008) “Interfacial stress transfer of near surface mounted FRP-to-concrete joints”, Engineering Structures, Vol. 30, Issue 7, July, 1861-1868.

    39.  Oehlers, D.J., Mohammed Ali, M.S., and Griffith, M.C. (2008) “Concrete component of the rotational ductility of reinforced concrete flexural members”. Advances in Structural Engineering, Vol. 11, No.3, June, 293-303.

    40.  *Haskett, M., Oehlers, D.J., and Mohamed Ali M.S. (2008) “Local and global bond characteristics of steel reinforcing bars”, Engineering Structures, Vol. 30, Issue 2, 376-383, Feb..

    41.  Seracino, R., Jones, N.M., M.S.M. Ali, Page M.W. and Oehlers, D.J. (2007) “Bond strength of near-surface mounted FRP-to-concrete joints” ASCE Composites for Construction. July/August pp401-409

    42.  Mohamed Ali M.S., Oehlers, D.J. and Seracino R. (2006) “Vertical shear interaction model between external FRP transverse plates and internal steel stirrups.” Engineering Structures, 28, pp381-389.

    43.  Sharma, S.K, Mohamed Ali M.S., Goldar,D., and SikdarP.K.,(2006) “Interfacial bond strength of FRP and metallic plated concrete specimens,”  Composites, Part-B: Engineering, Vol.37-1, January 2006, Pages 54-63.

    44.  Mohamed Ali M.S., Oehlers D.J. and Bradford M.A. (2005) “Debonding of steel plates bonded to the compression faces of RC beams”. Construction and Building Materials, Vol. 19, Issue 6, July, pp 413-422.

    45.  Oehlers, D.J., Liu, I.S.T., Ju, G., and Ali, M.S.M. (2004). “Prestress model for shear deformation debonding of FRP- and steel-plated RC beams”, Magazine of Concrete Research, Vol. 56, Issue 8, Oct, pp475-486.

    46.  *Oehlers D.J., Park S.M. and Mohamed Ali, M.S. (2003) “A Structural Engineering Approach to Adhesive Bonding Longitudinal Plates to RC Beams and Slabs.” Composites Part A, Vol. 34, pp 887-897.

    47.  Mohamed Ali M.S., Oehlers D.J. and Bradford M.A. (2002)  “Interaction between flexure and shear on the debonding of RC beams retrofitted with compression face plates”. Journal of Advances in Structural Engineering, Vol.5, No.4, pp223-230.

    48.  Mohamed Ali M.S., and Oehlers D.J. (2001)  “Strengthening of reinforced concrete bridges by external plates” Journal of the Indian Roads Congress, Vol.62, Part 2, pp232-258.

    49.  *Mohamed Ali M.S., Oehlers D.J. and Bradford M.A. (2001). “ Shear peeling of steel plates bonded to the tension faces of RC beams” ASCE Journal of Structural Engineering. Dec. Vol.127 No.12, pp1453-1460.

    50.  *Mohamed Ali, M.S., Oehlers, D.J. and Park, S. (2001) “Comparison between FRP and Steel Plating of Reinforced Concrete Beams.” Composites Part A – APPL S 32(9): pp1319-1328.

    51.  Oehlers, D.J., Mohamed Ali, M.S. and Weimin Lou. (1998) “Upgrading continuous reinforced concrete beams by gluing steel plates to their tension faces.” Journal of Structural Engineering, ASCE, Mar., Vol. 124, No. 3, 224-232.

    52.  Oehlers, D.J., Mohamed Ali, M.S. (1998) “Debonding of steel plates glued to RC flexural members.” Progress in Structural Engineering and Materials, Vol. 1, No 2, Jan, 185-192.

    53.  ; ; ; (1995) “Structural feasibility of RC beams strengthened with external reinforcement”, Indian Concrete Journal, v 69, n 1, Jan, 1995, pp 67-74.

    54.  ; ; ; (1992). “Strengthening of RC beams by external plates attached with expanding bolts”. Indian Concrete Journal, v.66,n.9,September1992.pp.509-513.

     

     

    PAPERS IN REFEREED CONFERENCE PROCEEDINGS

    1.     *Singh, Manpreet; Ali, M.S. Mohamed; Sheikh, A.H.(2015). Structural behaviour of Ultra-High Performance Fibre Reinforced Concrete columns subjected to eccentric loading. IABSE CONFERENCE GENEVA, 2015 Structural Engineering: Providing Solutions to Global Challenges

    2.     *M.S.Mohamed Ali, A.H.Sheikh, D.J.Oehlers and P.Visintin Analytical models for structural behaviour of Fibre reinforced concrete beams with steel or FRP bars Concrete – Innovation and Design, fib Symposium, Copenhagen May 18-20, 20

    3.     * https://www.scopus.com/static/images/s.gif (2014)Analytical models to predict structural behaviour of RC beams bonded with prestressed FRP laminates. Proceedings of the 7th International Conference on FRP Composites in Civil Engineering, CICE 2014. Vancouver Campus of the University of British Columbia, Vancouver; Canada; 20 August 2014 through 22 August 2014; Code 110944.

    4.     Griffith,M. and https://www.scopus.com/static/images/s.gif  (2014) Bond of FRP near surface mounted to clay brick masonry under monotonic and cyclic loads. Proceedings of the 7th International Conference on FRP Composites in Civil Engineering, CICE 2014. Vancouver Campus of the University of British Columbia, Vancouver; Canada; 20 August 2014 through 22 August 2014; Code 110944

    5.     Albitar,M., and (2014) Engineering Properties of Slag-based Geopolymer Concrete. Proceedings of the International Conference on Construction Materials and Structures (ICCMATS), 24-26 Nov 2014, Johannesburg, South Africa

    6.     Albitar,M., and (2014) Engineering Properties of Class-F Fly Ash-based Geopolymer Concrete. Proceedings of the International Conference on Construction Materials and Structures (ICCMATS), 24-26 Nov 2014, Johannesburg, South Africa

    7.     * and  Sheikh,A.H. (2014) Analytical Models for Fibre Reinforced Concrete Beams. Proceeding of 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23) Byron Bay, Australia 9-12 December 2014 Organised by Southern Cross University, Australia.

    8.     *Mohamed Ali,M.S., Oehlers, D.J., Callary, D., and Knight, (2010) “Prestressed fibre reinforced polymer (FRP) laminates for the strengthening of reinforced concrete structures” Publication Year 2010 ISBN 978-955-589-146-2 Start Page 214 End Page 219 Page Count 6 Publisher ICSBE Place Published Sri Lanka Conf Publication Title Proceedings of International Conference on Sustainable Built Environments (ICSBE-2010Conference Date 13-Dec-10 Conference Location Sri Lanka

    9.     Akbar, I., Oehlers, D.J., and Mohamed Ali, M.S. (2010) “Partial and full interaction behaviour of FRP plated steel members” International Conference on Sustainable Buildings and Infrastructure 2010, Kuala Lumpur, Malaysia.

    10.  Oehlers, D.J., Haskett, M., Mohamed Ali M.S., Lucas, W., and Muhamad, R.. (2010) . “FRP design using structural mechanics models” Keynote paper, Proceedings CICE 2010 –The 5th International Conference on FRP Composites in Civil Engineering, Beijing, China, September 27th-29th. pp 37-44.

    11.  Haskett, M., Oehlers, D.J., and Mohamed Ali M.S. (2009) “Ductility design of FRP reinforced concrete beams”. Proceedings FRPRCS-9 Conference, Sydney, Australia, July 13th-15th, 2009.

    12.  -08 Conference Location Switzerland

    13.  Oehlers, D.J., Mohamed Ali M.S., Haskett, M., and Griffith, M.C. (2008).  “Ductility design of FRP retrofitted RC structures”.  Conference on Advanced Composite Materials in Bridges and Structures, ACMBS5, Winnipeg, Manitoba, Canada, Sept. 22-24.

    14.  Oehlers, D.J., Mohamed Ali M.S., Haskett, M., and Griffith, C.G., (2008). “A partial-interaction ductility model for FRP plated RC flexural members”. Fourth International Conference on FRP Composites in Civil Engineering, CICE2008. 22-24th July, Zurich, Switzerland.

    15.  Oehlers, D.J., Mohammed Ali M.S., Griffith, M.C. and Ozbakkaloglu, T (2007) “Fundamental issues that govern the rotation of FRP retrofitted RC columns and beams: the intractable plastic hinge ductility problem”. Keynote paper, Asian Pacific Conference on FRP in Structures, APFIS 002 , Hong Kong, Dec.,

    16.  Oehlers, D.J., Mohamed Ali M.S., Griffith, M.C. (2007) “Ductility of FRP platted RC flexural members”, FRPRCS8, July, Patras, Greece, Dec. 2006.

    17.  Oehlers, D.J., Mohamed Ali M.S., and Seracino, R.(2005). “Vertical shear capacity partial interaction modelling of transversely plated members with steel stirrups”. International symposium on bond behaviour of FRP in structures, December 7th – 9th 2005, Hong Kong, China, 357-362.

    18.  ; Strengthening of reinforced concrete beams by bolting of steel and GFRP plates, Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, Proceedings of the 2005 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, 2005, p 1475-1480

    19.  Sharma, S.K., Mohamed Ali, M.S, and Sikdar P.K. (2004) “Investigation of debonding failure in FRP plated RC Beams” 2nd International Conference on FRP Composite in Civil Engineering, Adelaide, Australia , December 8-10, 2004

    20.  Sharma, S.K., Mohamed Ali, M.S., Rao, M.V.B and Sikdar, P.K. (2003) “Application of FRP as modern construction material” INAE National seminar on Engineered Building Materials and Their Performance, IIT-B, 17-18 January 2003, in Mumbai , pp.336-384

    21.  Mohamed Ali, M.S, Sharma, S.K., Singh,B., Rao, V.V.L.K., and Goldar D.(2002) “Performance of bridge deck slabs reinforced with GFRP bars” CORCON 2002 (East Asia Pacific Regional Conference on Corrosion), Goa, India, November 2002(CD)

    22.  Rao, K.V.V.L., Mohamed Ali M.S., Sharma S.K. and Rao M.V.B., Design Considerations of Concrete Structures Reinforced with Coated Rebars” CORCON 2002 (East Asia Pacific Regional Conference on Corrosion), Goa, India, November 2002. (CD)

    23.  Sharma, S.K., Mohamed Ali, M.S., Sikdar, P.K. and Rao, M.V.B. (2002) “Failure mode in RCC structural elements bonded with FRP plates” International conference and exhibition on reinforced plastics (ICERP-2002) , IIT Madras in Channai ,7-9, Feb. 2002, pp.147-154.

    24.  Oehlers, D.J., Mohamed Ali, M.S.(2001) “Critical Diagonal Crack Debonding of Adhesively bonded plates: The Shear Peeling Mechanism”, International Conference on FRP Composites in Civil Engineering, CICE 2001, Dec. 12-14th , Hong Kong China.

    25.  Mohamed Ali M.C., Oehlers, D.J. and Park S.M.(2000) Comparison between FRP and Steel Plating of Reinforced Concrete Beams. ACUN-2: Composites in the Transportation Industry.  February 2000, University of New South Wales. 

    26.  Mohamed Ali, M.S. and Oehlers, D.J. (1999)“Failure mechanism of reinforced concrete beams strengthened by gluing steel plates to the surfaces”. International conference on the mechanics of structures, materials and systems.” University of Wollongong, February 1999.

    27.  Mohamed Ali, M.S., Oehlers, D.J. and Bradford, M.(1998) “Design rules for gluing steel plates to the tension faces of reinforced concrete beams and slabs.”  EASEC - 6, The Sixth East Asia-Pacific Conference on Structural Engineering and Construction, Taipei, Taiwan, R.O.C. Jan. 1998.

    28.  Ali, M, Oehlers, D.J.(1997) “Enhancing the shear capacity of reinforced concrete beams by bonding steel plates to their sides”  15th ACMSM ‘97, Melbourne, 1997.

    29.  Sharma, S. K., Goldar, D., Rao, M.V.B., Mohamed Ali, M.S., and Kumar, N. (1996)“Study on bridge deck solid slab reinforced with gfrp reinforcement” International Seminar on Civil Engineering Practices in Twenty First Century, Roorkee, India 1996,pp.676-685

    30.  Rao, M.V.B., Mohamed Ali M.S. and Rao, V.V.L.K.(1994).Rehabilitation of structurally deficient or deteriorated concrete bridges.. Proceedings of the International Seminar on Failure, Rehabilitation and Retrofitting of Bridges & Aqueducts, Indian Institution of Bridge Engineers, Bombay(India).Nov’1994.vol.2.pp.91-102.

    31.  Rao, M.V.B., Raju,K.V.V. and Mohamed Ali M.S .(1992).A study of recent code provisions for shear in the design of well caps. Proceedings of the International Seminar on Bridge Substructure & Foundation, Indian Institution of Bridge Engineers, Bombay(India).January 1992.

    32.  Rao, M.V.B., and Mohamed Ali M.S.(1992).An appraisal on shear in concrete bridge decks.  National Seminar on R&D in Bridge Engineering, Lucknow(India), April1992.

    33.  Rao, M.V.B., and Mohamed Ali M.S .(1989). Application of epoxy resins in rehabilitation of bridges. National Seminar on Longevity of Bridges, Ahamedabad(India), October1989.

    34.  Rao, M.V.B., and Mohamed Ali M.S .(1989).Problems of cement concrete pavements in urban areas-possible solutions. Proc.of National Seminar on Concrete Roads-Emerging Trends, Indian Concrete Institute, Bombay(India), april,1995.

     

     

  • Professional Associations

    Professional experience:

    ·         2011 onwards- Senior Lecturer in Structural Engineering at the 成人大片

    ·         2005-2011: Senior Research Associate and part-time lecturer at School of Civil, Environmental and Mining Engineering, 成人大片(Australia)

    ·         1987-1994 and 2000-2004: Engineering Scientist in bridge and structural engineering at Central Road Research Institute under Council of Scientific & Industrial Research New Delhi (CSIR, India).

    ·         1996-2000: PhD at 成人大片 July-December 2004: visiting academic at the 成人大片 as a Raman Fellow awarded by Council of Scientific & Industrial Research(CSIR), India.

     

The information in this directory is provided to support the academic, administrative and business activities of the 成人大片. To facilitate these activities, entries in the University Phone Directory are not limited to University employees. The use of information provided here for any other purpose, including the sending of unsolicited commercial material via email or any other electronic format, is strictly prohibited. The University reserves the right to recover all costs incurred in the event of breach of this policy.

Entry last updated: Thursday, 12 Jan 2023

To link to this page, please use the following URL:  /directory/mohamed.mohamedsadakkathulla