CIVILENG 3003 - Structural Steel Design
North Terrace Campus - Semester 2 - 2024
-
General Course Information
Course Details
Course Code CIVILENG 3003 Course Structural Steel Design Coordinating Unit Civil Engineering Term Semester 2 Level Undergraduate Location/s North Terrace Campus Units 3 Contact Up to 4 hours per week Available for Study Abroad and Exchange Y Prerequisites CEME 2001 or CIVILENG 2001 or C&ENVENG 2025 Restrictions Available to BE(Civil & Struct), BE(Architectural) & associated double degree students only Assessment May include assignments, practical report, final exam and quizzes - details at the beginning of Semester Course Staff
Course Coordinator: Dr Mohamed Ali Sadakkathulla
Office: Engineering North N234
School of Architecture and Civil Engineeing
E-mail: ali.mohamed@adelaide.edu.au
Phone: +61-8-83133968Course Timetable
The full timetable of all activities for this course can be accessed from .
-
Learning Outcomes
Course Learning Outcomes
On successful completion of this course students will be able to:
1 Calculate the acceptable design loading for steel beams and columns using AS1100 and AS4100 2 Descriptive formula and code based understanding of the steel design fundamentals 3 Explain steel design and analysis through lab practicals and design assignments 4 Analyse and design simple steel girders for flexure and buckling 5 Analyse and design simple steel girders for shear 6 Analyse and design bolted and steel connections 7 Analyse beam-columns and frames 8 Understand the fundamental behaviour of steel-concrete composite girders
The above course learning outcomes are aligned with the Engineers Australia . The course develops the following EA Elements of Competency to levels of introductory (A), intermediate (B), advanced (C):
1.1 1.2 1.3 1.4 1.5 1.6 2.1 2.2 2.3 2.4 3.1 3.2 3.3 3.4 3.5 3.6 B B C — C C B C B — A A — — A A University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Attribute 1: Deep discipline knowledge and intellectual breadth
Graduates have comprehensive knowledge and understanding of their subject area, the ability to engage with different traditions of thought, and the ability to apply their knowledge in practice including in multi-disciplinary or multi-professional contexts.
1-8 Attribute 2: Creative and critical thinking, and problem solving
Graduates are effective problems-solvers, able to apply critical, creative and evidence-based thinking to conceive innovative responses to future challenges.
1-8 Attribute 3: Teamwork and communication skills
Graduates convey ideas and information effectively to a range of audiences for a variety of purposes and contribute in a positive and collaborative manner to achieving common goals.
1-8 Attribute 4: Professionalism and leadership readiness
Graduates engage in professional behaviour and have the potential to be entrepreneurial and take leadership roles in their chosen occupations or careers and communities.
1-8 Attribute 5: Intercultural and ethical competency
Graduates are responsible and effective global citizens whose personal values and practices are consistent with their roles as responsible members of society.
1-8 Attribute 6: Australian Aboriginal and Torres Strait Islander cultural competency
Graduates have an understanding of, and respect for, Australian Aboriginal and Torres Strait Islander values, culture and knowledge.
1-8 Attribute 7: Digital capabilities
Graduates are well prepared for living, learning and working in a digital society.
1-8 Attribute 8: Self-awareness and emotional intelligence
Graduates are self-aware and reflective; they are flexible and resilient and have the capacity to accept and give constructive feedback; they act with integrity and take responsibility for their actions.
1-8 -
Learning Resources
Required Resources
Australian Standards will be referred to at various points throughout the course
AS 4100 Steel structures ;These are available through the library at:
Recommended Resources
Text Book: Steel Designer’s Handbook, B. Gorencr, R. Tinyou and A. SyamOnline Learning
1. Lecture slides and lecture recordings (Echo360) in MyUni
2. Softcopies of standards and textbooks available from Library -
Learning & Teaching Activities
Learning & Teaching Modes
Module 1: Basic design of steel beams
Module 2: Design of Bending Members (Beams) – Local Buckling
Module 3: Design of Bending Members (Beams) – Global Buckling
Module 4: Design of Axially Loaded Columns Based on Local and Global Buckling
Module 5: Design of Beam-Columns
Module 6: Design of Stiffened and Unstiffened Webs of Beams for Shear
Module 7: Design of Connections –Simple Bolted and Welded Joints; Analysis; Introduction and Design of Tension Members
Module 8: Design of Steel Concrete Composite Beams and Slabs
Note: The above 8 modules form the syllabus for final examination, irrespective of whether any home assignment problems are given from these modules or not.
PRACTICAL REPORT- APPLICATION OF CONCEPTS FROM MODULES 1-3 &6Workload
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
A student enrolled in a 3 unit course, such as this, should expect to spend, on average 12 hours per week on the studies required. This includes both the formal contact time required to the course (e.g., lectures and practicals), as well as non-contact time (e.g., reading and revision).
A note on workload
•The universities policy is for every hour of classes you should be spending 3 hours of external study
•At some points during the course you will likely to need to put in the full 12 hours independent study.
•Third year is the biggest test in your UG studies.Learning Activities Summary
Week
Listen to
Assessment due by
9
Steel-concrete composite beams;
process data & analysis work
Work on prac report with your group
10
Continue Work on prac report with your group
Asst-5-
11
Finalise your report for submission
Steel Lab report due- 23/10/22
12
Final exam revision workshops & consulting
13 (SWOT WEEK)
Final exam consulting with lecturer/tutors
End of Semester Exams Period
Date, time, venue (To be advised by University) of final exam (3 hours duration)
Consult
Access Adelaide
-
Assessment
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Summary
* The specific due date and time for each assessment task will be published via MyUni during the course.Assessment Task Task Type Due* Weighting Learning Outcome Quiz Formative & Summative 10% 1 - 6 Homework Assignments Formative & Summative 10% 1 - 8 Group Practical Report Formative & Summative 20% 1 - 5 Exam Summative Exam period 60% 1 - 8 Assessment Related Requirements
Hurdle requirement: you must score at least 40% of the total marks alloted for the exam to pass the course.Assessment Detail
Examination – 60%
This is a 3 hour exam.
quiz - 10%
Homework assignments – 10%
A total of five homework assignments will be given. The problems will be uploaded on MyUni and you will get a week to solve them. Please follow the submission mode and due date and time mentioned in the assignment problem file. Late submission will incur a deduction of 10% marks for every day of delay in submission.
Group Practical report– 20%
These reports will be conducted by groups of four. Submit by the deadline given. Late submission will incur a deduction of 20% marks for every day of delay in submission.Submission
All assignments and practical report are online submission (single PDF file only).
Course Grading
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through .
-
Student Feedback
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
-
Student Support
- Academic Integrity for Students
- Academic Support with Maths
- Academic Support with writing and study skills
- Careers Services
- Library Services for Students
- LinkedIn Learning
- Student Life Counselling Support - Personal counselling for issues affecting study
- Students with a Disability - Alternative academic arrangements
-
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangements Policy
- Academic Integrity Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs Policy
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment Policy
- Reasonable Adjustments to Learning, Teaching & Assessment for Students with a Disability Policy
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
-
Fraud Awareness
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.
The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.
