MECH ENG 7077 - Submarine Naval Architecture Maritime Engineering
North Terrace Campus - Semester 2 - 2023
-
General Course Information
Course Details
Course Code MECH ENG 7077 Course Submarine Naval Architecture Maritime Engineering Coordinating Unit School of Mechanical Engineering Term Semester 2 Level Postgraduate Coursework Location/s North Terrace Campus Units 3 Contact Up to 40 hours a week - intensive mode Available for Study Abroad and Exchange Y Prerequisites MECH ENG 7042, MECH ENG 7046 Assumed Knowledge MECH ENG 7042, MECH ENG 7046 or equivalent Assessment Assignments, exam Course Staff
Course Coordinator: Mr Eric Fusil
Course Timetable
The full timetable of all activities for this course can be accessed from .
IMPORTANT - PLEASE READ
COURSE DELIVERY MODE:
it is a mix of weekly lectures (livestreamed and recorded but preferred face-to-face attendance if possible) and of tutorials.
For REMOTE LEARNING STUDENTS:
Depending on your time zone (Canada/USA - Europe), there will be specific timeslots to catch up live with the course coordinator.
ASSIGNMENTS:
- formative assignments ( not counting towards final grade): there will be several formative quizzes for students to check their learning
- summative assessments:
- a Quiz,
- The reverse engineering of an existing submarine from a naval architecture perspective with an industry specialized software,
- various calculations on naval architecture specialized software for resistance and powering,
- an open book exam. -
Learning Outcomes
Course Learning Outcomes
On successful completion of this course students will be able to:1 Identify the key domains in which a submarine naval architect has to be involved for seaworthiness. 2 Explain how hydrodynamics affect a submarine behaviour and how to control manoeuvrability. 3 Describe the different hazards that are involved in the most frequent accidents for submarines. 4 Summarize the submarine signatures and controls that impact stealth. 5 Demonstrate how to design and balance a submarine from a naval architecture perspective (stability and resistance and powering calculation - energy/propulsion). 6 Generate a mission profile for dynamic weight compensation (trim polygon). 7 Assess the naval architecture characteristics of a submarine based on key parameters. University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Attribute 1: Deep discipline knowledge and intellectual breadth
Graduates have comprehensive knowledge and understanding of their subject area, the ability to engage with different traditions of thought, and the ability to apply their knowledge in practice including in multi-disciplinary or multi-professional contexts.
1 芒聙聯 2 芒聙聯 3 芒聙聯 6 - 7 Attribute 2: Creative and critical thinking, and problem solving
Graduates are effective problems-solvers, able to apply critical, creative and evidence-based thinking to conceive innovative responses to future challenges.
2 芒聙聯 3 芒聙聯 4 芒聙聯 5 - 7 Attribute 3: Teamwork and communication skills
Graduates convey ideas and information effectively to a range of audiences for a variety of purposes and contribute in a positive and collaborative manner to achieving common goals.
1 芒聙聯 2 芒聙聯 4 芒聙聯 6 - 7 Attribute 4: Professionalism and leadership readiness
Graduates engage in professional behaviour and have the potential to be entrepreneurial and take leadership roles in their chosen occupations or careers and communities.
2 芒聙聯 4 芒聙聯 6 - 7 Attribute 5: Intercultural and ethical competency
Graduates are responsible and effective global citizens whose personal values and practices are consistent with their roles as responsible members of society.
1 Attribute 6: Australian Aboriginal and Torres Strait Islander cultural competency
Graduates have an understanding of, and respect for, Australian Aboriginal and Torres Strait Islander values, culture and knowledge.
NA Attribute 7: Digital capabilities
Graduates are well prepared for living, learning and working in a digital society.
2 芒聙聯 3 芒聙聯 5 芒聙聯 6 -7 Attribute 8: Self-awareness and emotional intelligence
Graduates are self-aware and reflective; they are flexible and resilient and have the capacity to accept and give constructive feedback; they act with integrity and take responsibility for their actions.
2 芒聙聯 6 - 7 -
Learning & Teaching Activities
Learning & Teaching Modes
Background reading and videos help the students project themselves into the world of submariners, mostly within Defence.
Weekly lectures provide the students with background knowledge but also a forum in which they are engaged.
Lecturers are proposing materials on which the students are asked about their analysis facing a specific engineering problem within the submarine context.
These lectures feature video and graphics to best illustrate the challenge.
An intensive part of the course is run mid-semester with Industry lecturers bringing their knowledge and personal stories.
As a result of this, the course is a mix of theory (academic) and industry experience with real-life situations that the engineers had to face.
Students have some formative quizzes leading them from the first principles in naval architecture and maritime engineering to design solutions and technologies.
That knowledge is then used by the students on a number of activities:
- The calculation of resistance and powering characteristics for a submarine hull, using spreadsheets and NAVCAD
- Assessing stability and manoeuvering performances, using PARAMARINE
- Optimizing a propeller to a submarine using PROPELEMENTS,
- Creating a trim polygon for a submarine with a specific mission profile,
- A reverse engineering of a submarine with industrial software using PARAMARINE,
Seminars are organized with Industry.Workload
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
The expected workload of 12 hours per week comprises:
- Background reading,
- Lecture attendance,
- Tutorials / computer exercises,
- Project,
- Peer reviews
Structured Learning: Contact sessions (In Semester) No. of sessions Duration
(hours)Total
HoursAcademic Lectures 21 1 21 Tutorials 10 2 20 Practicals 0 Industry Lectures 0 41 Assessment Tasks
(In Semester)% Assessment Weighting No. of
TasksPreparation
time (hours)Total
HoursSummative tutorials 20 2 5 10 Summative tests 10 1 1 1 Project design study 30 1 80 80 Literature review 0 Examination 40 1 3 3 Portfolio 0 Total Assessment Weighting % 100 94 Non-Contact Study /
Preparation (In Semester)No. of
SessionsStudy/Prep Time (hrs) Total
HoursWeekly reading / Other study 13 1 6.5 Tutorial preparation 0 Practical preparation 0 Test preparation 0 Exam preparation 1 7 7 Other/s (please specify): 0 13.5 Workload per semester (hrs) 148.5 *Workload per week (hrs) 11.42 Learning Activities Summary
No information currently available.
-
Assessment
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Summary
Assessment task Assessment type Assessment weighting % (Summative tasks must add up to 100%) Hurdle Requirement Course learning outcomes being assessed (Formative or Summative) (Yes or No) Exercise 1 S 10 No 1 2 Exercise 2 S 10 No 6 Quiz 1 F No 2 3 Quiz 2 F No 3 4 Quiz 3 F No 3 4 5 Quiz 4 S 10 No 1 2 3 4 5 6 Project report S 30 No 1 2 3 4 5 6 7 Final Exam S 40 No 1 2 3 4 5 6 7 Assessment Detail
- Exercise 1 will address the calculation of resistance and powering for a submarine hull.
- Exercise 2 will ask the student to propose how to set a Submarine for the successful mission delivery in terms of tank conditions within a dynamic trim polygon.
- Quizzes 1 to 3 help the student understand the design options in various submarine systems worldwide.
- Quiz 4 is assessing the students knowledge acquisition
- The Project report synthetise the students work on the model of submarine using the Paramarine Software
- The presentation of that project is performed during a seminar.
- The final exam is assessing how well the students have assimilated knowledge and skills in submarine engineering understanding.
Submission
No information currently available.
Course Grading
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through .
-
Student Feedback
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
-
Student Support
- Academic Integrity for Students
- Academic Support with Maths
- Academic Support with writing and study skills
- Careers Services
- Library Services for Students
- LinkedIn Learning
- Student Life Counselling Support - Personal counselling for issues affecting study
- Students with a Disability - Alternative academic arrangements
-
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangements Policy
- Academic Integrity Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs Policy
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment Policy
- Reasonable Adjustments to Learning, Teaching & Assessment for Students with a Disability Policy
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
-
Fraud Awareness
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.
The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.
