ENG 3004 - Systems Engineering and Industry Practice
North Terrace Campus - Semester 2 - 2022
-
General Course Information
Course Details
Course Code ENG 3004 Course Systems Engineering and Industry Practice Coordinating Unit Centre for STEM Education and Innovation Term Semester 2 Level Undergraduate Location/s North Terrace Campus Units 3 Contact Up to 6 hours per week Available for Study Abroad and Exchange Y Prerequisites At least 48 units at Levels I and II of the Program Incompatible ELEC ENG 3100, MECH ENG 3027, MECH ENG 3105 Assumed Knowledge ENG 1001 or TECH 1003 Assessment Online quizzes and tests, individual assessment, group assessment, peer assessment Course Staff
Course Coordinator: Dr Kim Harvey
Teaching team:
Course Timetable
The full timetable of all activities for this course can be accessed from .
-
Learning Outcomes
Course Learning Outcomes
- Communicate professionally and effectively through written, oral, and graphical means with others in the engineering profession and broader community, including conveying deep discipline knowledge to a generalist audience
- Demonstrate an ability for self-appraisal of strengths and weaknesses in cognitive and affective domains
- Judiciously apply interpersonal skills in team-based communication, including active listening, negotiation, problem solving, conflict management and leadership
- Apply a systems engineering approach to formulating and solving engineering problems
- Analyse a given problem and develop an appropriate problem specification
- Define, compare and select from coherent feasible solutions to meet the problem specification
- Recognise and apply the Engineers Australia Code of Ethics
- Explain workplace health, safety, welfare and environmental issues relevant to the industry
- Demonstrate awareness of the importance of career planning
University Graduate Attributes
No information currently available.
-
Learning Resources
Recommended Resources
There are a number of resources that are relevant to this course. Where applicable, they will be referenced in the course material for further reading.Online Learning
MyUni will be used for the course. Course information, lecture slides, lecture recordings, assignments and additional resources will all be available on MyUni.
MyUni-Canvas
This course will operate with the MyUni Learning Management System platform, Canvas.
MyUni Announcements
The announcement section will be used to notify students of important information, with critical announcements (changes to deadlines etc.) also emailed to students. It is assumed and expected that students take note of these announcements.
MyUni Discussion Board
The discussion board will also be used as a consultation channel for contact with teaching staff. Questions for teaching staff of a general nature relating to the course or assignment requirements are to be posted on MyUni. This allows the responses to be viewed by other students with similar questions and ensures that all students are given the same information.
-
Learning & Teaching Activities
Learning & Teaching Modes
This course consists of a mixture of online lectures and material, face-to-face workshops and guest speakers from industry.
The course is framed around three types of assessments:
- a group systems design project - From initial problem statement through to the selected concept
- an individual project proposal for a client; and
- the student's own professional development.
Weekly two-hour workshops will support the student's development and progress through the projects over the course of the semester. This is a hands on course and students will need to plan their schedule arround attendance.Workload
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
It is expected that students spend:
- Up to six hours/ week on lectures, online mateiral and assignments over the course of the semester.
- Two hours/ week attending the workshops
Learning Activities Summary
Industry Practice
Sustainability
- Human Centred Design
- Life Cycle Analysis
- Environmental Impact Analysis
- Climate Change
Ethics & Standards
Critical Thinking
- Reflective Practice and Thinking Critically
- Expositional Paragraph Structure and Cohesion
- Articulating your work in Written Reports
- Developing an Executive Summary
- Sourcing & Applying for Practical Experience
- Resumes, Cover Letters, LinkedIn - Branding
- Systems Approach to Engineering
- Engineering Decision Making
- Systems Engineering Management
- Solve the Right Problem: Context, Scenarios, Requirements
- Ideas to Reality: Architecture, Selection
- Model-Based Systems Engineering
- Design Considerations: Quality, Safety, Test and Evaluation, Planning Verification & Validation, Lifecycle Properties
-
Assessment
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Summary
Assessment Task Task Type Individual/ Group Weighting Online quizzes - weekly Online quizzes Individual
8% Professional practice assessments x 2 Industry practice Individual 8% Critical thinking x 3 Industry practice Individual 8% Client report Industry practice Individual 20% Video presentation Industry practice Individual 8% Systems design - Problem defintion artefacts Systems Engineering/ Articulation of technical content Group 8% Systems design -Final report Systems Engineering/ Articulation of technical content Group (scaled) 35% Systems design - Final report - Executive summary Systems Engineering/ Articulation of technical content Group (scaled) 5%
In accordance with the Assessment for Coursework Programs Policy, Procedure 1a. i: An exemption from the stated requirement that group assessment activities total no more than 30% has been granted.Assessment Detail
No information currently available.
Submission
No information currently available.
Course Grading
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through .
-
Student Feedback
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
-
Student Support
- Academic Integrity for Students
- Academic Support with Maths
- Academic Support with writing and study skills
- Careers Services
- Library Services for Students
- LinkedIn Learning
- Student Life Counselling Support - Personal counselling for issues affecting study
- Students with a Disability - Alternative academic arrangements
-
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangements Policy
- Academic Integrity Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs Policy
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment Policy
- Reasonable Adjustments to Learning, Teaching & Assessment for Students with a Disability Policy
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
-
Fraud Awareness
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.
The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.
