ENTREP 2051 - Prototyping: Possibilities to Product
North Terrace Campus - Semester 2 - 2021
-
General Course Information
Course Details
Course Code ENTREP 2051 Course Prototyping: Possibilities to Product Coordinating Unit Entrepreneurship, Commercialisation & Innov Centre Term Semester 2 Level Undergraduate Location/s North Terrace Campus Units 3 Contact Intensive Available for Study Abroad and Exchange Y Assessment Practical, quizzes, assignments Course Staff
Course Coordinator: Dr Matthew McKinlay
Program Director Contact Details: Innovation and Entrepreneurship
Name: Dr Wendy Lindsay
Email: wendy.lindsay@adelaide.edu.au
Teaching Staff
Name: Jon Soong
Email: jon@makersempire.com
Name: Mandi Dimitriadis
Email: mandi@makersempire.com
Teaching Assistants
Name: Luke Tansell
Email: luke@makersempire.com
Name: Jess McDonald
Email: jess@makersempire.comCourse Timetable
The full timetable of all activities for this course can be accessed from .
-
Learning Outcomes
Course Learning Outcomes
On successful completion of this course, students will be able to:- Identify, categorise and document different types of additive and subtractive manufacturing technology as per international standards.
- Design and prototype parts for each type of mainstream additive manufacturing technology using various design software as per international standards.
- Distinguish the difference between a 3D model, STL, and printer instruction as per international standards.
- Review and critique a maker business model based on successful and unsuccessful examples for a specific case study.
- Explain the legal, ethical and moral implications of 3D printing with reference to contemporary cases and common law precedents.
- Explain the possible future directions of 3D printing based on the current research areas.
University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Deep discipline knowledge
- informed and infused by cutting edge research, scaffolded throughout their program of studies
- acquired from personal interaction with research active educators, from year 1
- accredited or validated against national or international standards (for relevant programs)
1, 2, 3, 6 Critical thinking and problem solving
- steeped in research methods and rigor
- based on empirical evidence and the scientific approach to knowledge development
- demonstrated through appropriate and relevant assessment
2, 4, 5, 6 Teamwork and communication skills
- developed from, with, and via the SGDE
- honed through assessment and practice throughout the program of studies
- encouraged and valued in all aspects of learning
2, 4, 5 Career and leadership readiness
- technology savvy
- professional and, where relevant, fully accredited
- forward thinking and well informed
- tested and validated by work based experiences
1, 2, 3 Intercultural and ethical competency
- adept at operating in other cultures
- comfortable with different nationalities and social contexts
- able to determine and contribute to desirable social outcomes
- demonstrated by study abroad or with an understanding of indigenous knowledges
4, 5 Self-awareness and emotional intelligence
- a capacity for self-reflection and a willingness to engage in self-appraisal
- open to objective and constructive feedback from supervisors and peers
- able to negotiate difficult social situations, defuse conflict and engage positively in purposeful debate
1, 4, 5, 6 -
Learning Resources
Required Resources
To be advisedRecommended Resources
- Van den Berg, Bibi, Simone Van der Hof, and Eleni Kosta, eds. 3D Printing: Legal, Philosophical and Economic Dimensions. Vol. 26. Springer, 2015.
- Wimpenny, David Ian, Pulak M. Pandey, and L. Jyothish Kumar, eds. Advances in 3D Printing & Additive Manufacturing Technologies. Springer Singapore, 2017.
Library Resources
The 成人大片’s Barr Smith Library provides a range of learning resources including texts, journals, periodicals, magazines, and access to online databases and information services. It also offers a virtual library which is accessible via the University’s website. .Online Learning
is the 成人大片's online learning environment. It is used to support traditional face-to-face lectures, tutorials and workshops at the University. MyUni provides access to various features including announcements, course materials, discussion boards and assessments for each online course of study. -
Learning & Teaching Activities
Learning & Teaching Modes
This course is offered in blended learning mode with online modules and the face-to-face component offered as intensives.Workload
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
As a guide, a 3 unit course comprises a total of 156 hours work (this includes face-to-face contact, any online components, and self directed study).Learning Activities Summary
Schedule Sessions Type Delivery Mode Title Topic 1 Lecture Face-to-face Third Industrial Revolution Introduction 2 Lecture Online CAD to CAM Introduction 3 Lecture Face-to-face Introduction to 3D Printing Introduction 4 Lecture Face-to-face 3D Modelling Modelling 5 Lecture Face-to-face Fusion 360 Modelling 6 Lecture Online Designing for 3DP Designing 7 Lecture Face-to-face The Share Economy Designing 8 Lecture Online Fusion 360 Design II Designing 9 Lecture Online Post Processing Designing 10 Lecture Online Business Cases of new Maker Economy Business and Ethics 11 Lecture Online Legal Environment Business and Ethics 12 Lecture Online Environmental Impact Business and Ethics 13 Lecture Online Reverse Engineering Business and Ethics 14 Lecture Online Future of Fabrication Advances 15 Workshop Face-to-face Fusion 360 Modelling 16 Practical Face-to-face Makers Empire: 3D printing a functional product Designing 17 Practical Face-to-face Fusion 360: Improving on an everyday object Designing 18 Practical Face-to-face Design by Sharing Practical Designing 19 Project Face-to-face Unstructured Group work for major project Designing 20 Project Face-to-face Presentation Business and Ethics -
Assessment
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Summary
Assessment Task Task Type Length Weighting Learning Outcome Practical Group/ Summative 1500 words 30% 1, 2, 3 Online Quizzes Individual/ Formative 3 questions per quiz 20% 1, 2, 3, 4, 5, 6 SGDE Major Project Individual /Summative 10- 12 minute(s) 20% 4, 5 Essay Individual/ Summative 1500 words 30% 5, 6 Assessment Related Requirements
Students should attend all classes in order to pass the course. There is considerable experiential learning in workshops during the intensive classes that build your knowledge and thus enable you to be successful in this course.
Course results are subject to moderation by the ECIC Board of Examiners.Assessment Detail
Practicals: Three practicals will be held in groups of no more than three. Each group will be required to submit a practical report upon completion of each practical activity documenting their design decisions, any issues they encountered and how they resolved them. Practical reports will be limited to 500 words (1500 words in total for all three practical reports)
Online Quizzes: Four Quizzes will be held online with three questions per quiz. Each question will be broken into parts addressing the course learning outcomes. As this is formative, students will have unlimited attempts within the submission time to achieve the correct mark with the last attempt counting.
SGDE: The project will be a design exercise where students expand upon their individual design exercises implemented in the ME: Planning for Mini Project module.
Students will critically evaluate each other’s plans to modify and improve an existing product to solve a design challenge.
They will decide upon the best item each individual designed initially and implement those changes making further refinements using the design knowledge that they have been taught in the latter half of the course. Research into the product will be expected to be taken place so that students understand the market for which they are developing their product for.
Finally, prototypes for each printing technology will be created and evaluated for cost effectiveness against a sound business structure before presenting a 10-12 minute design pitch as to why their teams design and business model is best.
Following on from the SGDE, students will be encouraged to enter their designs and business model into the relevant applicable eChallenge streams.
Essay: Students will be asked to prepare a 1500 word essay aimed at posing possible solutions or future uses of additive manufacturing and how it will impact upon society.
Such question will change from year to year to prevent plagiarism but topics include, how additive manufacturing will replace traditional workforce paradigms, summarising and expanding upon a legal issue presently impacting upon additive manufacturing or compare and contrast environmental concerns of additive and subtractive manufacturing processes.
Submission
All text based assignments must be submitted via MyUni.
Please refer to step by step instructions:
There are a few points to note about the submission of assignments:
- Assignment Submission: Assignments should not be emailed to the instructor; they must be lodged via the MyUni Course site (unless specified to do both). Note that assignments may be processed via TURNITIN, which is an online plagiarism prevention tool.
- Cover Sheet: Please include in the assignment a completed 成人大片 Assessment Cover Sheet providing details of yourself and your team members (if applicable), your assignment, the course, date submitted, etc. as well as the declaration signed by you that this is your (your team’s) work. Note that the declaration on any electronically submitted assignment will be deemed to have the same authority as a signed declaration.
- Backup Copy of Assignments: You are advised to keep a copy of your assignments in case the submitted copy goes missing. Please ensure that all assignment pages are numbered. If your assignment contains confidential information, you should discuss any concerns with the Course Lecturer prior to submission.
- Extensions of Time: An application for Assessment Extension should be made well before the due date of the assignment to the Course Lecturer. Normally, extensions will only be granted for a maximum of two weeks from the original assignment submission date. Extensions will only be granted in cases of genuine medical, compassionate or extenuating circumstances.
- Failure to submit: Failure to submit an assignment on time or by the agreed extension deadline may result in penalties and may incur a fail grade. Note that a late penalty of 5% of the total available marks for that assessment item will be incurred each day an assignment is handed in late (Unless otherwise stated in 'Assessment Related Requirements' or 'Assessment Detail' above). Assignments handed in after 14 days from the due submission date will fail even if a 100% mark is granted for the work.
Resubmission & Remarking
Resubmission of an assignment for remarking after reworking it to obtain a better mark will not normally be accepted. Approval for resubmission will only be granted on medical or compassionate grounds.Course Grading
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through .
-
Student Feedback
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
-
Student Support
- Academic Integrity for Students
- Academic Support with Maths
- Academic Support with writing and study skills
- Careers Services
- Library Services for Students
- LinkedIn Learning
- Student Life Counselling Support - Personal counselling for issues affecting study
- Students with a Disability - Alternative academic arrangements
-
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangements Policy
- Academic Integrity Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs Policy
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment Policy
- Reasonable Adjustments to Learning, Teaching & Assessment for Students with a Disability Policy
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
-
Fraud Awareness
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.
The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.