成人大片

STUDENT RESPONSIBILITIES
Please respect the facilities throughout the University.

In the School of Architecture and Built Environment students are required to fabricate models, projects and other hands-on creative activities. Of course, you will make a mess in the process! No problem! Please clean up after yourself. If the materials are recyclable and you don't want to reuse them yourself, put them in the recycling bins. Don't leave paper/cardboard/offcuts on the floor or table, put them in the bin. Don't leave broken blades etc. on tables, put them in a sharps bin. Don't leave work (models, drawings etc) in a space (tutorial room, computer lab, studio) and expect to find it when you come back. The facilities are shared. The School recommends that you store your work in a locker available from ASA or in Hub Central.

The tables in the learning and teaching spaces (tutorial rooms, computer labs, studios) are NOT cutting mats. Would you use an exacto knife or a scalpel to cut model making materials directly on your dining table at home? No? Don't do it at the University. Use a cutting mat. If you don't have one, buy one. All students should have a cutting mat in their Equipment Kit. You are expected to bring this with you if you are model-making, using glue etc.

Students are permitted to bring food and drink into the learning and teaching spaces. Please respect your peers. When you have finished your bottle of water, coffee cup, bubble tea, Coke, juice, Boost, Red Bull etc. etc. put it in the bin. Don't leave your takeaway meal festering on a table cultivating mould. Put it in the bin.

The importance of hygiene and cleanliness is amplified during COVID 19. Respect your peers. Respect your facilities. Please clean up after yourself at all times. This is your responsibility.



SUBMISSIONS
All details about the individual assignment submissions and online participation tasks will be provided on MyUni / Canvas.

Please note the following general points about Submissions:

General
All submissions must include Student Name and Student ID Number. Submissions without Student Name or ID Number will not be considered for marking, and will receive zero marks in accordance with the guidelines.

Please adhere to submission deadlines and follow instructions provided.

Students must not submit work for an assignment that has previously been submitted for this course or any other course without prior approval from the Course Coordinator.

On occasion, the lecturer/tutor may wish to retain students’ work for future reference and the relevant student will be informed at such a time.

Early Submission:
There is an early submission box located on Level 4 which is cleared out daily at 10am. Please mark your submission clearly before placing in box. Online submissions can be made prior to the due date.

Models for in-class presentation cannot be handed in early.

Late Submission:
The school will NOT accept late submissions and any such assignment will receive zero marks. This also applies to electronic submissions.

Printing delays & hard disk crashes will not be entertained as legitimate causes for delay, so please ensure that the work is finished in advance. Online submissions can also take time when file sizes are large and this can result in delayed submissions. The School recommends submissions < 50MB.

Re-submission:
The school has a resubmission policy whereby students can redeem failed work by submitting additional work for a maximum of 50%.

Good practice:
Students should ensure that they regularly backup their work on multiple locations as hard-disk crashes are an unfortunate reality. When relying on community printing facilities, students should attempt to finish their work in advance to avoid unnecessary delays. Students must retain a copy of all assignments submitted (digital or hardcopy), as originals may be lost during the submission process.

For modified arrangements of submission and assessment due to special circumstances see the following Assessment Task Extension(s) & Additional Assessment guidelines.

Modified Arrangements (General)
Students can apply for extensions or modified arrangements based on Medical conditions or other Extenuating circumstances. However, students need to submit their application along with supporting documents within 5 business days of the condition becoming applicable.

The application form (the 'Blue Form') is available from the Front Office and needs to be submitted at the Front Office along with any supporting documentation. It is not sufficient, for example, just to submit a medical certificate. If you are sick a medical certificate needs to be appended to the Blue Form.

Please note that submitting an application does not guarantee acceptance and the Course Coordinator will inform the applicant if the application is accepted. Please DO NOT contact the Course Coordinator directly.

Medical Reasons:
In case of an extended medical condition which makes it impossible for the student to submit the work on time, an Application for Assessment Task Extension due to Medical Circumstances (Blue Form) may be lodged with the Front Office along with a doctor’s certificate within 5 business days.

Extenuating Circumstances:
If the student is unable to submit the work on time due to extenuating circumstances an Application for Assessment Task Extension due to Extenuating Circumstances (Blue Form) may be lodged with the Front Office. Please note that this is only available for certain military, religious, or legal obligations and does not extend to minor personal problems.

Compassionate Grounds:
In case of certain extraordinary personal problems students can apply for extensions based on compassionate grounds (Blue Form). However, these must first be discussed with the Course Coordinator in person through appointment during the assigned office hours.

Student Support:
For a full range of student support services visit /student/

Additional Assessment:
If a student receives a Fail grade for the course with an overall mark between 45 and 49, they may be eligible for an Offer of Additional Assessment which would allow them to get a maximum of 50 Pass for the Course.

Additional Assessment offers are made by the School and the student will be informed directly once these are made available.

Disability:
Students who have a disability and wish to seek modified submission or assessment arrangements can contact the
University Disability Services at /disability/ and then communicate this to the Course Coordinator in person by appointment.

Elite Athlete:
Students who have national/international sporting commitments and wish to seek modified submission or assessment
arrangements need to register with the University Elite Athlete Support Scheme at /eliteathletes/ and then communicate this to the Course Coordinator in person by appointment.

Refer to MyUni for more information.

On successful completion of this course students will be able to:
1. Design and justify research methodology for data collection.
2. Demonstrate understanding of research code of conduct and ethical approval process.
3. Utilize appropriate research methodology to collect data.
4. Critically analyse the collected data and draw conclusions accordingly.
5. Present research findings and conclusions in an academically appropriate manner.

Books:
Fellows, R. F., & Liu, A. M. (2015). Research methods for construction. John Wiley & Sons.
Bryman, A., & Bell, E. (2015). Business research methods. Oxford University Press, USA.
Yin, R. K. (2013). Case study research: Design and methods. Sage publications.
Fowler Jr, F. J. (2013). Survey research methods. Sage publications.
Chen, H. X. (2012). Approaches to quantitative research: A guide for dissertation students. Oak Tree Press.
Denicolo, P., & Becker, L. (2012). Developing research proposals. Sage.
Biggam, J. (2015). Succeeding with your master's dissertation: a step-by-step handbook. McGraw-Hill Education (UK).
Naoum, S. G. (2012). Dissertation research and writing for construction students. Routledge.

Journals:
Journal of Cleaner Production
Journal of Construction Engineering and Management
Journal of Management in Engineering
Building and Environment
International Journal of Project Management
Energy and Buildings
Applied Energy
Project Management Journal
Construction Management and Economics
Facilities
Journal of Green Building
Energy Policy
Journal of Green Building
International Journal of Construction Management

University Email:
The school uses the University email system to get in touch with the students. So it is imperative that you check your email regularly and keep up to date with any new announcements.

MyUni:
MyUni is an essential online tool which will be used to communicate information regarding the course including details of assignments and interim grades. There are many other learning resources and assessment pieces that rely on the MyUni system for delivery. Therefore it is recommended that you familiarise yourself with the various functions of MyUni and employ it to its fullest extent. https://myuni.adelaide.edu.au

Discussion Board:
The MyUni Discussion Board can be used to interact with other students and tutors and is an essential tool to discuss information and increase your understanding of issues.

Lecture Recording:
In certain cases the recording of the lectures is made available in electronic format for students to listen through on their own time and make notes, and is provided through the MyUni system. However, this service is only available for lectures with essential course content and may not include guest lectures. Furthermore, where the presentation content is subject to copyright or the guest speaker is uncomfortable with the recording of the content, the lecture recording will not be made available online. So students should not rely solely on this mode of learning and arrange to attend or get lecture content from peers.

Zoom meeting and sessions:
From time to time, supervison meetings and other sessions might be run in Zoom. Arrangements will be made prior to the semester start.

Noticeboard / Handbook:
General information about the activities at the School is available online from the Student Noticeboard which can be accessed at
https://unified.adelaide.edu.au/group/professons-studentarchitecture/ current-student
Students can also access a copy of the Student Handbook at the following link:
https://unified.adelaide.edu.au/group/professons-student-architecture/enrolments

The learning and teaching strategy is an active learning one, with the student taking responsibility for defining the research topic, choosing and applying appropriate research methods, time management and production of the final dissertation. The approach to assessment is one of integration with teaching and “assessment for learning” rather than of learning.

Study will be structured through regular meetings with the dissertation supervisor who will monitor and advise on progress but day to day work may be undertaken at the student’s convenience. Deadlines for assessment will be strictly enforced which will provide an overall framework for the semester of study.

The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

The University expects full-time students (ie. those taking 12 units per semester) to devote at least 48 hours per week to their studies. Accordingly, students undertaking this 3 unit course are expected to devote 12 hours per week to contact activities and self-guided studies.

Based on this framework here are some figures that might assist workload management:

For a 6 unit course:
Total workload hours: 24 Hrs per week x 13 weeks = 312 Hrs
Total contact hours: 6 Hrs per week x 12 weeks = 72 Hrs
Total self-guided study: 312 Hrs – 72 Hrs = 240 Hrs

These 240 hours should be used towards preparation of weekly tasks and for completion of the various assignments associated with the course, including development of various skills required to complete the same. Please organise your time wisely.

This is a 6 unit course. Recommended study commitments are meant to be hours of full time study, not just sitting thinking about the subject! The communication skills developed by regularly and actively participating in discussions are considered to be most important by the School and are highly regarded by employers and professional bodies.

Essential information on construction management specific research and approaches to research in the built environment are provided in two separate courses: an existing course ARCH 7042 Designing Research and a new course Research Dissertation (M). The approach to learning is progressive, building upon fundamental concepts and knowledge acquisition culminating in this course which tests students’ ability to apply the research approaches outlined in these two courses. Students will use the literature review report and final research proposal developed in Research Dissertation (M) course for Research Dissertation course. Regular meetings with the allocated supervisor aim to ensure that students are clear in defining their research question/ aim and make appropriate choice of research methods. The attendance and participation and interim report milestones are designed to monitor progress as well as provide progressive feedback to students.

Failure to attend teaching due to medical, compassionate or extenuating circumstances is dealt with the School Policy, administered by the School Office. Submit the appropriate application for supplementary consideration together with the original signed medical or other relevant officer, to the School Office. If you foresee a problem contact the Course Coordinator BEFORE the problem actually occurs. Otherwise, contact the Course Coordinator as soon as possible and submit the appropriate application for supplementary consideration to the School Office.

Please pay attention to following policies:
fieldtrips: Field Work policy and guidelines (http://www.adelaide.edu.au/hr/ohs/handbook/); and
insurance information (/legalandrisk/insurance/information/);

Assessment Task	Task Type	Weighting	Word Count / Time	Due	Learning Outcome
Attendance & participation	Individual	10%	At least 6 supervisor meetings	Over semester	2,5
Interim report	Individual	30%	5000 words	Mid semester	1,2,3
Final dissertation	Individual	60%	8000-10000 words	End of semester	1,2,3,4,5
Total		100%

   
   
 

Attendance & participation: Students must attend at least 6 face to face meetings with their supervisor over the course of the semester in order to be credited with 10% of the total assessment.

Interim report: Students must present an individual written interim report which outlines the research progress on data collection and preliminary data analysis.

Final dissertation: The final dissertation consists of a structured 8-10,000 word report containing relevant data and supporting materials which clearly states the research question/aim of the work, explains the methodological basis of the enquiry, provides background evidence of literature search and review of relevant sources to explain the current state of knowledge on the chosen topic. The dissertation will also demonstrate evidence of the application of appropriate research methods to address the research question /aim, analyse any data or information gathered and seek to address the research question /aim by drawing conclusions from the analysis. All sources of information are expected to be referenced in an appropriate style. Students are expected to give a verbal presentation which summarises the content of their written report, to the supervisor and other students in the class by the end of the semester.

All assignments must be submitted through MyUni site. Note that NO LATE submissions will be accepted unless it is due to illness and other accepted circumstances as explained in the School's Student Handbook.

Submissions (General):
All submissions must include Student Name and Student ID Number. Submissions without Student Name or ID Number will not be considered for marking, and will receive zero marks in accordance with the guidelines.

In addition, all assignments need to have an Assignment Cover Sheet which must be signed and dated by the student before submission. Please attach the cover sheet in front of the document, to the top left hand corner.

Please adhere to submission deadlines and follow instructions provided.

Students must not submit work for an assignment that has previously been submitted for this course or any other course without prior approval from the Course Coordinator.

On occasion, the lecturer/tutor may wish to retain students’ work for future reference and the relevant student will be informed at such a time.