成人大片

ELEC ENG 2102 - Electric Energy Conversion

North Terrace Campus - Semester 1 - 2021

This course provides a general introduction to power engineering. It focuses mainly on the principles, modelling and analysis of DC and AC electrical machines and transformers. The principles of electric drives and power systems are also discussed.

  • General Course Information
    Course Details
    Course Code ELEC ENG 2102
    Course Electric Energy Conversion
    Coordinating Unit School of Electrical & Electronic Engineering
    Term Semester 1
    Level Undergraduate
    Location/s North Terrace Campus
    Units 3
    Contact Up to 7 hours per week
    Available for Study Abroad and Exchange N
    Prerequisites ELEC ENG 1100 or ELEC ENG 1101
    Incompatible ELEC ENG 3021
    Assessment Quiz(zes), Tutorial preparation, practicals and Written exam
    Course Staff

    Course Coordinator: Associate Professor Wen Soong

    Course Timetable

    The full timetable of all activities for this course can be accessed from .

  • Learning Outcomes
    Course Learning Outcomes
    On successful completion of this course students will be able to:

     
    1 Model an electric power system, by combining the fundamental major components.
    2 Describe the basic principles of DC and AC electric machines and variable-speed drives.
    3 Model, and analyse the major components of an electric traction drive.
    4 Analyse the performance of a DC motor or generator using its equivalent circuit. Explain its construction and operating principles, including back-E.M.F, and efficiency.
    5 Analyse single and three-phase AC power circuits using phasors, to determine real and reactive power flow and demonstrate power-factor correction.
    6 Analyse the performance of transformers and explain concepts of the back-E.M.F equation, saturation, and iron losses.
    7 Analyse the performance of an induction machine using its equivalent circuit. Explain the operating principles, construction and the concept of slip.
    8 Explain the operating principles, construction and performance of synchronous machines.
    9 Develop practical skills through performing tests on electrical machines to determine their parameters and performance. Analyse and discuss experimental results in reports.

     
    The above course learning outcomes are aligned with the Engineers Australia .
    The course is designed to develop the following Elements of Competency: 1.1   1.2   1.3   1.4   1.5   2.1   2.2   3.2   

    University Graduate Attributes

    This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:

    University Graduate Attribute Course Learning Outcome(s)
    Deep discipline knowledge
    • informed and infused by cutting edge research, scaffolded throughout their program of studies
    • acquired from personal interaction with research active educators, from year 1
    • accredited or validated against national or international standards (for relevant programs)
    1-8
    Critical thinking and problem solving
    • steeped in research methods and rigor
    • based on empirical evidence and the scientific approach to knowledge development
    • demonstrated through appropriate and relevant assessment
    1-8
    Teamwork and communication skills
    • developed from, with, and via the SGDE
    • honed through assessment and practice throughout the program of studies
    • encouraged and valued in all aspects of learning
    8
  • Learning & Teaching Activities
    Learning & Teaching Modes

    No information currently available.

    Workload

    No information currently available.

    Learning Activities Summary

    No information currently available.

  • Assessment

    The University's policy on Assessment for Coursework Programs is based on the following four principles:

    1. Assessment must encourage and reinforce learning.
    2. Assessment must enable robust and fair judgements about student performance.
    3. Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
    4. Assessment must maintain academic standards.

    Assessment Summary
    Assessment Task Weighting (%) Individual/ Group Formative/ Summative
    Due (week)*
    Hurdle criteria Learning outcomes
    Tutorials 5 Individual Summative Weeks 2-12 1. 2. 3. 4. 5. 6. 7.
    Quiz 10 Individual Summative Week 5 1. 2. 3.
    On-Line quizzes 10 Individual Summative Weeks 2 to 12 1. 2. 3. 4. 5. 6. 7.
    Practicals 20 Group Summative Weeks 4 to 12 Min 40% 1. 2. 4. 8.
    Examination 55 Individual Summative Exam Period Min 40% 1. 2. 3. 4. 5. 6. 7.
    Total 100
    * The specific due date for each assessment task will be available on MyUni.
     
    This assessment breakdown is registered as an exemption to the University's . The exemption is related to the Procedures clause(s): 1. b. 3.   
     
    This course has a hurdle requirement. Meeting the specified hurdle criteria is a requirement for passing the course.

    Due to the current COVID-19 situation modified arrangements have been made to assessments to facilitate remote learning and teaching. Assessment details provided here reflect recent updates.

    Practice Examination - 10% weighting
    Automated On-line Quizzes - 15% weighting
    Practical Exercises - 30% weighting
    Examination - 45%

    Practice examination: The original “in-class written quiz” will be replaced with a “practice examination”. It will be shorter than the
    “real” examination, but it will contain material of a similar quality, and it will provide an formative experience for students, so that they can gauge how well they are going with this type of material. The practice examination will have a weighting of 10% for all students.

    Automated on-line quizzes: There will be 6 tutorials and 6 on-line quizzes on related topics. They will be worth a total of 15% of the assessment, for both undergraduate and postgraduate students. (This has been reduced by 5%, to allow for the “practice examination quiz”.)

    Practical exercises: The practical exercises will be worth 30% of the subject assessment for undergraduate students, and 25% for postgraduate students. (This reduction is to give better weightings overall, and to allow for the fact that postgraduate students have a longer examination.) A hurdle requirement of 40% applies to this part of the course.

    Examinations: The examination will be worth 45%. A hurdle requirement of 40% applies to this part of the course.

    Assessment Detail

    No information currently available.

    Submission

    No information currently available.

    Course Grading

    Grades for your performance in this course will be awarded in accordance with the following scheme:

    M10 (Coursework Mark Scheme)
    Grade Mark Description
    FNS   Fail No Submission
    F 1-49 Fail
    P 50-64 Pass
    C 65-74 Credit
    D 75-84 Distinction
    HD 85-100 High Distinction
    CN   Continuing
    NFE   No Formal Examination
    RP   Result Pending

    Further details of the grades/results can be obtained from Examinations.

    Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.

    Final results for this course will be made available through .

  • Student Feedback

    The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.

    SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.

  • Student Support
  • Policies & Guidelines
  • Fraud Awareness

    Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.

The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.