ELEC ENG 2100 - Digital Systems
North Terrace Campus - Semester 2 - 2023
-
General Course Information
Course Details
Course Code ELEC ENG 2100 Course Digital Systems Coordinating Unit School of Electrical & Electronic Engineering Term Semester 2 Level Undergraduate Location/s North Terrace Campus Units 3 Contact Typically up to 2 hours per week but up to 5 hours in the weeks with practicals Available for Study Abroad and Exchange Y Prerequisites ELEC ENG 1102 Incompatible ELEC ENG 3028 Assessment Mid-Semester tests, workshop preparation and demonstration of outcomes, exam Course Staff
Course Coordinator: Associate Professor Braden Phillips
Course Timetable
The full timetable of all activities for this course can be accessed from .
-
Learning Outcomes
Course Learning Outcomes
On successful completion of this course students will be able to:
1 Design, build and test digital logic for systems of moderate complexity using common digital components, schematic diagrams, and hardware description language 2 Use and explain engineering practices to manage the complexity of digital systems 3 Use appropriate implementation technologies for digital systems 4 Design CMOS logic gates at the transistor schematic level 5 Work effectively and ethically in teams to undertake the design of digital systems
The above course learning outcomes are aligned with the Engineers Australia .
The course is designed to develop the following Elements of Competency: 1.1 1.2 1.3 1.4 1.5 2.1 2.2 2.3 2.4 3.2 3.4 3.5 3.6
University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Attribute 1: Deep discipline knowledge and intellectual breadth
Graduates have comprehensive knowledge and understanding of their subject area, the ability to engage with different traditions of thought, and the ability to apply their knowledge in practice including in multi-disciplinary or multi-professional contexts.
1-5 Attribute 2: Creative and critical thinking, and problem solving
Graduates are effective problems-solvers, able to apply critical, creative and evidence-based thinking to conceive innovative responses to future challenges.
1-5 Attribute 3: Teamwork and communication skills
Graduates convey ideas and information effectively to a range of audiences for a variety of purposes and contribute in a positive and collaborative manner to achieving common goals.
2, 5 Attribute 4: Professionalism and leadership readiness
Graduates engage in professional behaviour and have the potential to be entrepreneurial and take leadership roles in their chosen occupations or careers and communities.
2, 5 Attribute 5: Intercultural and ethical competency
Graduates are responsible and effective global citizens whose personal values and practices are consistent with their roles as responsible members of society.
5 Attribute 7: Digital capabilities
Graduates are well prepared for living, learning and working in a digital society.
1-5 Attribute 8: Self-awareness and emotional intelligence
Graduates are self-aware and reflective; they are flexible and resilient and have the capacity to accept and give constructive feedback; they act with integrity and take responsibility for their actions.
5 -
Learning Resources
Required Resources
Textbook: David Harris and Sarah Harris, Digital Design and Computer Architecture, Elsevier, Second Edition (2013). The full text of this book is available electronically from the 成人大片 Library.
A set of slides, recorded slide show presentations, practice problems, worked solutions, and other supporting materials will be available for downloading from the course web site.Online Learning
This course uses the MyUni web site. All announcements are posted on MyUni. Recorded slide show presentations, practice and tutorial questions, and other resources are available on MyUni. The gradebook is used to communicate marks. The research assignment is submitted using MyUni. A discussion board is available for course-related discussion. -
Learning & Teaching Activities
Learning & Teaching Modes
Workshops: the course uses a flipped classroom with an emphasis on weekly 2-hour face-to-face workshops. Students prepare for workshops by reading sections of the textbook, watching recorded presentations, and attempting preparation exercises. During workshops, teaching staff spend time with each student individually to help explain difficult concepts. Workshop time is also spent working as individuals on exercise problems and in small groups on design problems.
Recorded Presentations: wherever possible the presentations follow the structure, terminology and notation of the course textbook. Slides and recoded presentations are available prior to workshops and, where material outside of the scope of the textbook is presented, detailed notes are provided. Students are expected to read sections of the textbook, watch the presentations and attempt some exercise problems in preparation for workshops.
Practicals: two 3-hour practicals are dedicated to learning and practicing logic simulation and synthesis using the SystemVerilog hardware description language.Workload
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
The information below is provided as a guide to help students engage appropriately with the course requirements.
Activity Contact Hours Workload Hours Workshop Preparation 36 Recorded Slide Presentaions 36 Tests 3 12 Workshops 24 36 Practicals 6 6 Practice Questions and Revision 24 Total 33 150
Learning Activities Summary
Week Workshop Topic Practical Test 1 Topic 1: Building Digital Systems 2 Topic 1: Building Digital Systems 3 Topic 2: Combinational Logic Design 4 Topic 2: Combinational Logic Design Test 1 5 Topic 3: Sequential Logic Design Session 1 6 Topic 3: Sequential Logic Design Session 2 7 Topic 4: CMOS Logic Test 2 8 Topic 4: CMOS Logic 9 Topic 5: Digital Subsystems & Interfaces 10 Topic 5: Digital Subsystems & Interfaces Test 3 11 Review and Integration 12 Review and Integration -
Assessment
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Summary
* The specific due date for each assessment task will be available on MyUni.Assessment Task Weighting (%) Individual/ Group Formative/ Summative Due (week)* Learning outcomes Workshops (12) 12 Individual Formative Weeks 1-12 1-5 Mid-semester tests (3) 24 Individual Summative Weeks 4, 7, 10 1-4 Exam 64 Individual Summative 1-4 Total 100
This assessment breakdown is registered as an exemption to the University's . The exemption is related to the Procedures clause(s): 1. b. 3.Assessment Detail
Workshops: students maintain an exercise book in which they record tutorial preparation and the work completed during tutorials. This is assessed during tutorials on the basis of the student having attempted and then corrected prescribed exercises.
Tests: 60-minute tests are held online in weeks 4, 7 and 10.
Exam: a 2-hour examination is held at the end of the semester.Submission
Workshops: logbooks are marked during the workshops. Marks are awarded for completion of the previous workshop and preparation for the current one.
Tests: test are completed online in MyUni during the scheduled hour shown in Access Adelaide for weeks 4, 7, and 10.
Exam: the exam is conduced as part of the University scheduled and facilitated exams at the end of semster.
Extensions for workshops and tests can be arranged for circumstances eligible for modified arranegments under the Modified Arrangements for Coursework Assessment Policy. Please contact the Course Coordinator or to request an extension.Course Grading
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through .
-
Student Feedback
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
The following changes have been made for 2023 in response to last year's feedback
- added two 3-hour SystemVerilog formative practical sessions
- reduced the scope of the course, and increased its focus, by removing the topic on microarchitecture and incorporating this instead as applied examples and case studies in the other topics
- removed the research assignment
-
Student Support
- Academic Integrity for Students
- Academic Support with Maths
- Academic Support with writing and study skills
- Careers Services
- Library Services for Students
- LinkedIn Learning
- Student Life Counselling Support - Personal counselling for issues affecting study
- Students with a Disability - Alternative academic arrangements
-
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangements Policy
- Academic Integrity Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs Policy
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment Policy
- Reasonable Adjustments to Learning, Teaching & Assessment for Students with a Disability Policy
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
-
Fraud Awareness
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.
The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.
