ENTREP 3000 - Innovation and Creativity
North Terrace Campus - Semester 2 - 2018
-
General Course Information
Course Details
Course Code ENTREP 3000 Course Innovation and Creativity Coordinating Unit Entrepreneurship, Commercialisation & Innov Centre Term Semester 2 Level Undergraduate Location/s North Terrace Campus Units 3 Contact Intensive: 36 to 40 hours Available for Study Abroad and Exchange Y Prerequisites At least 2 years full time undergraduate study Assessment Individual assignments, group presentation, quizzes Course Staff
Course Coordinator: Dr Wendy Lindsay
Program Director Contact Details: Innovation and Entrepreneurship
Name: Dr Wendy Lindsay
Email: wendy.lindsay@adelaide.edu.au
Teaching Staff
Name: Simon Williams
Email: simon.williams@adelaide.edu.au
Name: Susie Chant
Email: susan.chant@adelaide.edu.auCourse Timetable
The full timetable of all activities for this course can be accessed from .
-
Learning Outcomes
Course Learning Outcomes
On successful completion of this course, students will be able to:
1 Critically analyse creativity, barriers to creativity and how creativity leads to innovation. 2 Develop and implement strategies to enhance personal creativity and transform it to innovation. 3 Apply teamwork skills: process, collaboration, interpersonal skills, oral and written communication. 4 Apply ethics and morality as a part of creativity and innovation. University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Deep discipline knowledge
- informed and infused by cutting edge research, scaffolded throughout their program of studies
- acquired from personal interaction with research active educators, from year 1
- accredited or validated against national or international standards (for relevant programs)
1,2,4 Critical thinking and problem solving
- steeped in research methods and rigor
- based on empirical evidence and the scientific approach to knowledge development
- demonstrated through appropriate and relevant assessment
1,2,4 Teamwork and communication skills
- developed from, with, and via the SGDE
- honed through assessment and practice throughout the program of studies
- encouraged and valued in all aspects of learning
1,2,3,4 Career and leadership readiness
- technology savvy
- professional and, where relevant, fully accredited
- forward thinking and well informed
- tested and validated by work based experiences
1,2,3,4 Intercultural and ethical competency
- adept at operating in other cultures
- comfortable with different nationalities and social contexts
- able to determine and contribute to desirable social outcomes
- demonstrated by study abroad or with an understanding of indigenous knowledges
4 Self-awareness and emotional intelligence
- a capacity for self-reflection and a willingness to engage in self-appraisal
- open to objective and constructive feedback from supervisors and peers
- able to negotiate difficult social situations, defuse conflict and engage positively in purposeful debate
2,3,4 -
Learning Resources
Required Resources
Text book:
No text book required for this course
Readings will be supplied in MyUni.Recommended Resources
Further articles and readings will be available on MyUni
Library Resources
The 成人大片’s Barr Smith Library provides a range of learning resources including texts, journals, periodicals, magazines, and access to online databases and information services. It also offers a virtual library which is accessible via the University’s website. .Online Learning
is the 成人大片's online learning environment. It is used to support traditional face-to-face lectures, tutorials and workshops at the University. MyUni provides access to various features including announcements, course materials, discussion boards and assessments for each online course of study. -
Learning & Teaching Activities
Learning & Teaching Modes
This course is offered in blended learning mode with the face-to-face component offered as intensives.Workload
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
The information below is provided as a guide to assist students in engaging appropriately with the course requirements. As a guide, a 3 unit course comprises a total of 156 hours work (this includes face-to-face contact, any online components, and self directed study).Learning Activities Summary
This is a draft schedule and session dates are a guide only. The timetable may be changed during the course delivery if necessary.
Day Content Readings Activities 1 Introduction to creativity and innovation 1 Lectures/Workshops 2 Creativity tools 2 Lectures/Workshops 3 Happiness and Creativity methodologies 3 Lectures/Workshops Multiple choice test Part 1 Assessment 4 Innovation, Group work 4, 5 Lectures/Workshops 5 Innovation/Presentation Skills 6, 7 Lectures/Workshops Student Group presentation Assessment post Multiple choice test part 2 Assessment post Essay Assessment Small Group Discovery Experience
SGDE is available in the assignment where research skills are developed as part of a process of developing a presentation connecting creativity with innovation. Students present the research required to analyse and apply creative thinking in relation to innovation and entrepreneurship. Individual and group problem-solving skills are developed in the tutorials and assessed in the group assignment. Students develop and extend analysis skills by researching and developing solutions that address their identified research questions. -
Assessment
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Summary
An overview of the course assessment appears in the following Table. Details appear in the following section:
# Assessment Length Weighting Due Date Learning Outcomes 1 Creativity Exam 1 hour 30 mins 35% See MyUni 1,2,4 2 Innovation Exam 1 hour 30 mins 35% See MyUni 1,2,4 3 Group presentation and participation 20 minutes 30% See MyUni 1-4 Total 100%
The exams may cover any of the topics from the lectures and readings that have been set as part of the course. Please note that, following University policy, dictionaries are not allowed in exams.
Legible writing and the quality of English expression are considered to be integral parts of the assessment process. Marks may be deducted in the final examination because of poor writing or incorrect English expression.
It is each student's responsibility to read the examination timetable. Misreading the timetable is not accepted as grounds for granting a supplementary exam. University staff are not permitted to provide examination times to students over the telephone or in response to personal enquiries. Examinations will be held only at the time and locations stated in the University’s Examination Timetable and so students should not make any arrangements to be absent until after the examination period.Assessment Related Requirements
Note: a late penalty of 10% of the total available marks for that assessment item will be incurred each day an assignment is handed in late
Students should attend all classes in order to pass the course. There is considerable experiential learning in workshops during the intensive classes that build your knowledge and thus enable you to be successful in this course.
Course results are subject to moderation by the ECIC Board of ExaminersAssessment Detail
Assessment 1: Creativity Multiple choice and short answer quiz
Weighting: 35%
Task: Complete the online quiz consisting of up to 20 multiple choice and 5 short answer questions.
Assessment 2: Innovation Multiple choice and short answer quiz
Weighting: 35%
Task: Complete the online quiz consisting of up to 20 multiple choice and 5 short answer questions.
Assessment 3: Group presentation, participation and attendance
Weighting: 30%
Task: Each group will provide a presentation and answer questions.
Attendance and presentations must demonstrate all members of the group contributed.Submission
All text based assignments must be submitted via MyUni.
Please refer to step by step instructions:
There are a few points to note about the submission of assignments:
- Assignment Submission: Assignments should not be emailed to the instructor; they must be lodged via the MyUni Course site (unless specified to do both). Note that assignments may be processed via TURNITIN, which is an online plagiarism prevention tool.
- Cover Sheet: Please include in the assignment a completed 成人大片 Assessment Cover Sheet providing details of yourself and your team members (if applicable), your assignment, the course, date submitted, etc. as well as the declaration signed by you that this is your (your team’s) work. Note that the declaration on any electronically submitted assignment will be deemed to have the same authority as a signed declaration.
- Backup Copy of Assignments: You are advised to keep a copy of your assignments in case the submitted copy goes missing. Please ensure that all assignment pages are numbered. If your assignment contains confidential information, you should discuss any concerns with the Course Lecturer prior to submission.
- Extensions of Time: An application for Assessment Extension should be made well before the due date of the assignment to the Course Lecturer. Normally, extensions will only be granted for a maximum of two weeks from the original assignment submission date. Extensions will only be granted in cases of genuine medical, compassionate or extenuating circumstances.
- Failure to submit: Failure to submit an assignment on time or by the agreed extension deadline may result in penalties and may incur a fail grade. Note that a late penalty of 5% of the total available marks for that assessment item will be incurred each day an assignment is handed in late (Unless otherwise stated in 'Assessment Related Requirements' or 'Assessment Detail' above). Assignments handed in after 14 days from the due submission date will fail even if a 100% mark is granted for the work.
Resubmission & Remarking
Resubmission of an assignment for remarking after reworking it to obtain a better mark will not normally be accepted. Approval for resubmission will only be granted on medical or compassionate grounds.Course Grading
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through .
-
Student Feedback
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
-
Student Support
- Academic Integrity for Students
- Academic Support with Maths
- Academic Support with writing and study skills
- Careers Services
- Library Services for Students
- LinkedIn Learning
- Student Life Counselling Support - Personal counselling for issues affecting study
- Students with a Disability - Alternative academic arrangements
-
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangements Policy
- Academic Integrity Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs Policy
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment Policy
- Reasonable Adjustments to Learning, Teaching & Assessment for Students with a Disability Policy
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
-
Fraud Awareness
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.
The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.