PROP 7000 - Development and Construction

North Terrace Campus - Semester 1 - 2021

This course aims to provide an introduction and overview of the urban development process. It explores the structure and organisation of the development industry and examines the production of urban development as a process. This exploration includes development feasibility studies including site and market analysis and regulatory and construction aspects. Emphasis is placed on the constructability of urban developments including a discussion of different construction techniques, site constraints, regulatory constraints such as fire and disability access and the cost of different construction methods, materials and finishes. The sustainability of buildings in respect of construction and life cycle performance is also addressed.

Open All

Course Details

Course Code	PROP 7000
Course	Development and Construction
Coordinating Unit	School of Architecture and Built Environment
Term	Semester 1
Level	Postgraduate Coursework
Location/s	North Terrace Campus
Units	3
Contact	Up to 3 hours per week
Available for Study Abroad and Exchange	N
Assessment	Site Analysis Report (20%); Highest and Best Use Analysis Report (40%); Concept Design (40%)

Course Staff

Course Coordinator: Mr Peter Koulizos

Course Timetable

The full timetable of all activities for this course can be accessed from .

Wednesdays 10.00 -1.00 in 4th year studio

Course Learning Outcomes

On successful completion of this course, students will be able to:

Demonstrate a broad understanding of the urban development process.
Interpret mechanisms designed to regulate urban development.
Perform a site analysis including assessment of physical and policy constraints and opportunities.
Critically evaluate the importance of sustainability as a factor in development decision making and design.
Apply relevant design standards to a development concept.
Perform a feasibility assessment for an urban development.

University Graduate Attributes

This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:

University Graduate Attribute	Course Learning Outcome(s)
Deep discipline knowledge informed and infused by cutting edge research, scaffolded throughout their program of studies acquired from personal interaction with research active educators, from year 1 accredited or validated against national or international standards (for relevant programs)	1,2,3,4,5,6
Critical thinking and problem solving steeped in research methods and rigor based on empirical evidence and the scientific approach to knowledge development demonstrated through appropriate and relevant assessment	1,2,3,4,5,6
Teamwork and communication skills developed from, with, and via the SGDE honed through assessment and practice throughout the program of studies encouraged and valued in all aspects of learning	1,4,5
Career and leadership readiness technology savvy professional and, where relevant, fully accredited forward thinking and well informed tested and validated by work based experiences	1,4,5
Intercultural and ethical competency adept at operating in other cultures comfortable with different nationalities and social contexts able to determine and contribute to desirable social outcomes demonstrated by study abroad or with an understanding of indigenous knowledges	1,2,3,4,5,6
Self-awareness and emotional intelligence a capacity for self-reflection and a willingness to engage in self-appraisal open to objective and constructive feedback from supervisors and peers able to negotiate difficult social situations, defuse conflict and engage positively in purposeful debate	1,2,3,4,5,6

Learning Resources

Recommended Resources

Please refer to MyUni for details of recommended readings and websites

Speaker Series:
The School has a fortnightly lecture series where respected practitioners and academics from the field deliver a public lecture on contemporary architectural practice. In order to expand your knowledge of contemporary directions in design it is recommended that you attend these sessions. The exact detail of dates and speakers is available from the School website and the Front Office.

Online Learning

University Email:
The school uses the University email system to get in touch with the students. So it is imperative that you check your email regularly and keep up to date with any new announcements.

MyUni:
MyUni is an essential online tool which will be used to communicate information regarding the course including details of assignments and interim grades. There are many other learning resources and assessment pieces that rely on the MyUni system for delivery. Therefore it is recommended that you familiarise yourself with the various functions of MyUni and employ it to its fullest extent. https://myuni.adelaide.edu.au

Discussion Board:
The MyUni Discussion Board can be used to interact with other students and tutors and is an essential tool to discuss information and increase your understanding of issues.

Lecture Recording:
In certain cases the recording of the lectures is made available in electronic format for students to listen through on their own time and make notes, and is provided through the MyUni system. However, this service is only available for lectures with essential course content and may not include guest lectures. Furthermore, where the presentation content is subject to copyright or the guest speaker is uncomfortable with the recording of the content, the lecture recording will not be made available online. So students should not rely solely on this mode of learning and arrange to attend or get lecture content from peers.

Noticeboard / Handbook:
General information about the activities at the School is available online from the Student Noticeboard which can be accessed at
https://unified.adelaide.edu.au/group/professons-studentarchitecture/ current-student
Students can also access a copy of the Student Handbook at the following link:
https://unified.adelaide.edu.au/group/professons-student-architecture/enrolments

Learning & Teaching Modes

There are 10 Modules in the course. Each Module addresses a specific topic and material is delivered ina variety of ways including recorded lectures, face to face lectures, readings, exercises and practical assignments.

Workload

The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

The University expects full-time students (ie. those taking 12 units per semester) to devote at least 48 hours per week to their studies. Accordingly, students undertaking this 3 unit course are expected to devote 12 hours per week to contact activities and self-guided studies.

Based on this framework here are some figures that might assist workload management (delete as appropriate):

For a 3 unit course:
Total workload hours: 12 Hrs per week x 13 weeks = 156 Hrs
Total contact hours: 3 Hrs per week x 12 weeks = 36 Hrs
Total self-guided study: 156 Hrs – 36 Hrs = 120 Hrs, that is about 10 hours each week.

These 120 hours should be used towards preparation of weekly tasks and for completion of the various assignments associated with the course, including development of various skills required to complete the same. Please organise your time wisely.

Learning Activities Summary

Week	Module topic	Assessment
1	Introduction to Development
2	The Development Process
3	Site Analysis and Mapping
4	Urban Planning
5	Economic and Market Anlaysis	Assignment 1
6	Cost, Value and Feasibility
Break
Break
7	Constructability
8	Building Code Classification
9	Access and Egress	Assignment 2
10	Fire Safety
11	Fire Safety
12	Sustainability & Design
13		Assignment 3

The University's policy on Assessment for Coursework Programs is based on the following four principles:

Assessment must encourage and reinforce learning.
Assessment must enable robust and fair judgements about student performance.
Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
Assessment must maintain academic standards.

Assessment Summary

Assessment Item	Due Date	Weighting	Learning Outcome
Report (individual)	Week 5	20%	1,3
Report (group work)	Week 8	40%	1,2,3,6
Design project	Weeks 13	40%	1,4,5
Total		100%

Assessment Detail

Assessment 1

The task is to produce an individual report which thoroughly analyses the physical nature of the site setting it in its context and identifies all development constraints and opportunities. These should include not only physical characteristics such as size, shape, slope, existing structures, trees and vegetation, water courses, roads and utility services. Your analysis should also include the site context. What is the nature of its wider surroundings? How does it relate to these? Are there examples of linkages or severance?

Assessment 2

This consists of a Highest and Best Use analysis for the site. We will scope the content of the HBU as an in class exercise. Your report should be done in pairs and include text, graphics and statistics and any other information and modes of presentation you consider useful. It should be a maximum of 2000 words in length.

Assessment 3

Your task is to produce a schematic design for one of the sites based on the information you have gathered and on the principles and methods you have learned during the course. The client is a national housing developer who is considering purchasing the site for development. Imagine you have to explain your ideas for the site to the client in the sense of telling them what are the opportunities and constraints and how these affect what can be

Submission

#1	Site Analysis	Week 5
#2	HBU Report	Week 9
#3	Construction Design Report	Week 13

All work should be submitted electronically using the course MyUni site. Students should ensure that work is submitted on time on or before the due date
Late work will not be marked.
Extensions will be granted for valid reasons such as illness but these must be arranged with the course co-ordinator before the submission deadline.
Where appropriate, Harvard referencing conventions should be used.

Course Grading

Grades for your performance in this course will be awarded in accordance with the following scheme:

M10 (Coursework Mark Scheme)
Grade	Mark	Description
FNS		Fail No Submission
F	1-49	Fail
P	50-64	Pass
C	65-74	Credit
D	75-84	Distinction
HD	85-100	High Distinction
CN		Continuing
NFE		No Formal Examination
RP		Result Pending

Further details of the grades/results can be obtained from Examinations.

Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.

Final results for this course will be made available through .

Student Feedback

The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.

SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
Student Support
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
Fraud Awareness

Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.

The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.

Authorised by:	Deputy Vice-Chancellor and Vice-President (Academic)
Maintained by:	Course Outlines Administrator

成人大片