成人大片

C&ENVENG 7115 - Flood Estimation and Modelling

North Terrace Campus - Semester 2 - 2015

Floods place severe social and economic stress on the affected communities, with global flood damage in 2011 alone estimated at $70 billion, leading to more than 6000 fatalities. Civil and environmental engineers play a critical role in estimating flood risk, and identifying infrastructure and planning solutions to manage the adverse consequences of flooding. This course explores approaches and methods for estimating flood risk that are commonly used in engineering practice, to be selected from the following topics: two dimensional flood modelling, rare and extreme floods, compound events, interaction of extreme rainfall and storm surge in the coastal zone, use of regionalised approaches, and the estimation of climate change impact assessments. Approaches to support the planning and management of floods will also be explored.

  • General Course Information
    Course Details
    Course Code C&ENVENG 7115
    Course Flood Estimation and Modelling
    Coordinating Unit School of Civil, Environmental & Mining Eng
    Term Semester 2
    Level Postgraduate Coursework
    Location/s North Terrace Campus
    Units 3
    Contact 4 hours per week
    Available for Study Abroad and Exchange N
    Prerequisites C&ENVENG 3077
    Assessment Three summative tutorials (5% in total), three design assignments (45% in total) and one final exam (50% in total).
    Course Staff

    Course Coordinator: Professor Seth Westra

    Course Timetable

    The full timetable of all activities for this course can be accessed from .

  • Learning Outcomes
    Course Learning Outcomes

    No information currently available.

    University Graduate Attributes

    No information currently available.

  • Learning Resources
    Online Learning
    All handouts, course material and lecture slides will be made available on MyUni. The use of the discussion board on MyUni is also strongly recommended. Assignments are to be submitted online, with instructions to be provided through email announcements and/or during lectures.
  • Learning & Teaching Activities
    Learning & Teaching Modes
    The course will generally involve two one-hour lectures and two one hour CATS practical sessions per week. Certain weeks during semester will be dedicated to tutorial sessions where individuals and groups will work exclusively on their assignments. The timing of these sessions will be provided on the MyUni site.
    Workload

    The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

    The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

    In line with University guidelines, it is expected that the average student should spend 12 hours per week on this course. In addition to the lectures (2 hours) and the practical session (2 hours), students are expected to spend an additional 8 hours per week reviewing lecture material and working on the online quizzes and design projects.
    Learning Activities Summary

    No information currently available.

  • Assessment

    The University's policy on Assessment for Coursework Programs is based on the following four principles:

    1. Assessment must encourage and reinforce learning.
    2. Assessment must enable robust and fair judgements about student performance.
    3. Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
    4. Assessment must maintain academic standards.

    Assessment Summary

    No information currently available.

    Assessment Related Requirements
    In order to pass this course, students must obtain at least:

    • 35% averaged over all phases of the design project, and
    • 40% for the exam
    If the above requirements are not met, students will receive a zero (0) fail for this course.
    Assessment Detail

    No information currently available.

    Submission
    Digital submissions should be submitted by the appropriate MyUni portal for the particular assessment. Further information will be provided through the course’s MyUni website.

    Late submissions will only be accepted for the design projects. There will be a loss of 10% of the marks obtained if the submission is less than 24h late, 20% if the submission is between 24 and 48h late and so on.  Extensions will only be granted in special circumstances (e.g. illness) and must be sought for each assessment task individually. Extensions will not be granted less than 24h before the deadline for a given task, with the exception of a medical certificate.
    Course Grading

    Grades for your performance in this course will be awarded in accordance with the following scheme:

    M10 (Coursework Mark Scheme)
    Grade Mark Description
    FNS   Fail No Submission
    F 1-49 Fail
    P 50-64 Pass
    C 65-74 Credit
    D 75-84 Distinction
    HD 85-100 High Distinction
    CN   Continuing
    NFE   No Formal Examination
    RP   Result Pending

    Further details of the grades/results can be obtained from Examinations.

    Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.

    Final results for this course will be made available through .

  • Student Feedback

    The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.

    SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.

  • Student Support
  • Policies & Guidelines
  • Fraud Awareness

    Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.

The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.