PLANNING 7033 - Urban Design Principles
North Terrace Campus - Semester 1 - 2022
-
General Course Information
Course Details
Course Code PLANNING 7033 Course Urban Design Principles Coordinating Unit School of Architecture and Built Environment Term Semester 1 Level Postgraduate Coursework Location/s North Terrace Campus Units 3 Contact Up to 3 hours per week Available for Study Abroad and Exchange Y Course Staff
Course Coordinator: Mr Martin Larbi
Course Co-ordinator
Dr. Martin Larbi
Horace Lamb, Room 3011b
Tel: (08) 8313 3052
Email: martin.larbi@adelaide.edu.au
Office hours: By appointment.
Contact Protocol
Students should make use of MyUni for regular updates, announcements and material. Course materials will be uploaded as they become available throughout the semester. Enquiries may be made directly to the Course Co-ordinator, by email or during stated office hours. In the interests of efficiency, please try to resolve queries rst through inspection of MyUni and supplied materials. Students should also regularly check the status of their 成人大片 email account as this is the primary channel of communication with students outside of contact hours. Students should be familiar with the School’s Student Handbook and be aware of the policies and procedures it describes.
Course Support Staff
For issues concerning enrolment or queries about the School’s programs contact Clement Low,Student Advisor, 8313 5877, clement.low@adelaide.edu.au.
For issues related to discrimination or harassment contact the Course Coordinator or Velice Wennan,School Manager, 8313 5475, velice.wennan@adelaide.edu.au.
For issues relating to health, safety and wellbeing contact Ian Florance, Health, Safety and WellbeingO cer, 8313 5978, ian. orance@adelaide.edu.au.
For issues relating to rst aid and other general matters contact Sue Fiedler, First Aid Officer, 8313 5836, sue. edler@adelaide.edu.au who is generally available at the School of Architecture and Built Environment reception.Course Timetable
The full timetable of all activities for this course can be accessed from .
The course meets weekly in a three-hour session. Course meetings are in the “Workshop” format, a flexible configuration that mixes didactic (lecture-style) and interactive (tutorial-style) delivery, as well as occasional in-class assignment work and progress reviews.
A detailed course schedule will be distributed at the start of the course. -
Learning Outcomes
Course Learning Outcomes
Knowledge and Understanding
1. To expose students to a range of historical precedents, theoretical ideas, case studies, and field experiences relevant to the study and practice of urban design and planning.
2. To situate urban design within its social, cultural, political, technological, and aesthetic context.
3. To facilitate the development of a rigorous intellectual framework for design and research on cities, and an awareness of the student’s emerging personal theoretical position and approach to urban design.
Skills
4. To develop skills in the representation, analysis, and interpretation of urban places and spaces, in both textual and graphic modes, using both analogue and digital techniques.
5. To develop critical and analytical thinking along with the ability to communicate this thinking (writing, oral and graphic presentation, other media).
6. To foster capacities to generate, coordinate, share, and debate ideas and proposals in collaboration with others.University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Attribute 1: Deep discipline knowledge and intellectual breadth
Graduates have comprehensive knowledge and understanding of their subject area, the ability to engage with different traditions of thought, and the ability to apply their knowledge in practice including in multi-disciplinary or multi-professional contexts.
1-3 Attribute 2: Creative and critical thinking, and problem solving
Graduates are effective problems-solvers, able to apply critical, creative and evidence-based thinking to conceive innovative responses to future challenges.
2,3 Attribute 3: Teamwork and communication skills
Graduates convey ideas and information effectively to a range of audiences for a variety of purposes and contribute in a positive and collaborative manner to achieving common goals.
6 Attribute 4: Professionalism and leadership readiness
Graduates engage in professional behaviour and have the potential to be entrepreneurial and take leadership roles in their chosen occupations or careers and communities.
1-6 Attribute 5: Intercultural and ethical competency
Graduates are responsible and effective global citizens whose personal values and practices are consistent with their roles as responsible members of society.
6 Attribute 8: Self-awareness and emotional intelligence
Graduates are self-aware and reflective; they are flexible and resilient and have the capacity to accept and give constructive feedback; they act with integrity and take responsibility for their actions.
6 -
Learning Resources
Required Resources
Readings: A list of required readings is given and linked to the sequence of lectures and assignments. Students are required to work their way through these readings and demonstrate their familiarity with them in tutorial discussions and submitted work.
Equipment: Students must always be prepared to make notes and sketches during any scheduled contact sessions of the course. Use of tablets (iPads) equipped with appropriate software may also form part of the toolkit for the course - if required for particular tasks these will be provided.Recommended Resources
A partial list of recommended readings to provide starting points for further research is available in the bibliography. Other recommended resources, including software, online tools, and production techniques, may also be developed progressively over the course of the semester and posted to MyUni or circulated via email.
Students are encouraged to take an active interest in the research activities of the department, including the programs of CAMEA and CASRU, as well as the Speaker Series talks and other occasional events. -
Learning & Teaching Activities
Learning & Teaching Modes
This course advances its learning outcomes primarily through a workshop-based approach. Workshops involve a combination of didactic content (lectures), interactive sessions (seminars), and project-directed (studio) modes. Online-based collaborative and communication modes may also constitute an important aspect of the course. A detailed program of workshop activities will be provided at the start of the course.Workload
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
The University expects full-time students (ie. those taking 12 units per semester) to devote at least 48 hours per week to their studies. Accordingly, students undertaking this 3 unit course are expected to devote 12 hours per week to contact activities and self-guided studies.
Based on this framework here are some figures that might assist workload management:
For a 3 unit course:
Total workload hours: 12 Hrs per week x 13 weeks = 156 Hrs
Total contact hours: 3 Hrs per week x 12 weeks = 36 Hrs
Total self-guided study: 156 Hrs – 36 Hrs = 120 Hrs
These 120 hours should be used towards preparation of weekly tasks and for completion of the various assignments associated with the course, including development of various skills required to complete the same. Please organise your time wisely.Learning Activities Summary
No information currently available.
Specific Course Requirements
Failure to attend teaching due to medical, compassionate or extenuating circumstances is dealt with the School Policy, administered by the School Office. Submit the appropriate application for supplementary consideration together with the original signed medical or other relevant officer, to the School Office. If you foresee a problem contact the Course Coordinator BEFORE the problem actually occurs. Otherwise, contact the Course Coordinator as soon as possible and submit the appropriate application for supplementary consideration to the School Office. -
Assessment
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Summary
Due to the current COVID-19 situation modified arrangements have been made to assessments to facilitate remote learning and teaching. Assessment details provided here reflect recent updates.Assessment Task Task Type Weighting Assignment 1 20% Assignment 2 Group work: Groups are expected to work together over zoom during the workshop sessions in Week 5,6 and 7. 25% Assignment 3 35% Participation+Attendance Individual (one short presentation, engagement in discussions in Canvas and three online quizzes. 20% Total 100% Assessment Detail
There are three main assessments in this course:
Assignment 1 undertakes a reading and analysis of an urban theme, spaces and/or place;
Assignment 2 deepens knowledge of urban design precedents and principles through focussed research;
Assignment 3 develops an in-depth study of cases, questions, issues, or strategies in urban design, aiming to extract and present their animating principles.
Both group work and individual components are involved.
Assignment details and specific assessment criteria will be announced progressively throughout the course in assignment specification sheets, and will be elaborated and advanced in workshops.
Note that assessment requirements and deadlines may change as the course progresses. Such changes will be made in consultation with the class.
• Final results for the course will only be available through Access Adelaide and students SHOULD NOT contact the course coordinator or the tutors for the same.
• Most assignments will be marked within 3 weeks of the submission and the interim grades will be made available through the My Grades system. Students are expected to inform the Course Coordinator if there are any errors with the marks entered on the system.
• The best examples of students’ work will be included in the All-In Exhibition to be held at the end of term alongside the best works from other courses and year levels.Submission
- All assignments must be submitted at the time and place as indicated above. Note that NO LATE submissions will be accepted unless it is due to illness and other accepted circumstances as explained in the School's Student Handbook.
- Selected submissions of the Final Assignment will be included in the All-In Exhibition at the end of the semester.
- All submissions must include Student Name and Student ID Number. Submissions without Student Name or ID Number will not be considered for marking, and will receive zero marks in accordance with the guidelines.
- In addition, all assignments need to have an Assignment Cover Sheet which must be signed and dated by the student before submission. Please attach the cover sheet in front of the document, to the top left hand corner.
- Please adhere to submission deadlines and follow instructions provided.
- Students must not submit work for an assignment that has previously been submitted for this course or any other course without prior approval from the Course Coordinator.
- On occasion, the lecturer/tutor may wish to retain students’ work for future reference and the relevant student will be informed at such a time.
- There is an early submission box located on Level 4 which is cleared out daily at 10am. Please mark your submission clearly before placing in box.
- Models for in-class presentation cannot be handed in early.
- The school will NOT accept late submissions and any such assignment will receive zero marks. This also applies to electronic submissions.
- Printing delays & hard disk crashes will not be entertained as legitimate causes for delay, so please ensure that the work is finished in advance.
- The school has a resubmission policy whereby students can redeem failed work by submitting additional work for a maximum of 50%.
- The deadline for all re-submissions is 12pm on Friday 3rd November 2017.
- Students should ensure that they regularly backup their work on multiple locations as hard-disk crashes are an unfortunate reality.
- When relying on community printing facilities, students should attempt to finish their work in advance to avoid unnecessary delays.
- Students must retain a copy of all assignments submitted (digital or hardcopy), as originals may be lost during the submission process.
- For modified arrangements of submission and assessment due to special circumstances see the following Assessment Task Extension(s) & Additional Assessment guidelines.
- Students can apply for extensions or modified arrangements based on Medical conditions or other Extenuating circumstances. However, students need to submit their application along with supporting documents within 5 business days of the condition becoming applicable.
- The application forms are available from the Front Office and at http://www.adelaide.edu.au/student/exams/mod_arrange.html and need to be submitted at the Front Office along with any supporting documentation.
- Please note that submitting an application does not guarantee acceptance and the Course Coordinator will inform the applicant if the application is accepted. Please DO NOT contact the Course Coordinator directly.
- Medical Reasons:
- In case of an extended medical condition which makes it impossible for the student to submit the work on time, an Application for Assessment Task Extension due to Medical Circumstances may be lodged with the Front Office along with a doctor’s certificate within 5 business days.
- If the student is unable to submit the work on time due to extenuating circumstances an Application for Assessment Task Extension due to Extenuating Circumstances may be lodged with the Front Office.
- Please note that this is only available for certain military, religious, or legal obligations and does not extend to minor personal problems. (Refer to Student Handbook at http://www.architecture.adelaide.edu.au/current/resources/ for further details or contact Student Advisor).
- In case of certain extraordinary personal problems students can apply for extensions based on compassionate grounds. However, these must first be discussed with the Course Coordinator in person through appointment during the assigned office hours.
- To maintain privacy relating to personal issues students can contact the Counselling Service on 83135663 for an individual appointment.
- If a student receives a Fail grade for the course with an overall mark between 45 and 49, they may be eligible for an Additional Assessment which would allow them to get a maximum of 50 Pass for the Course.
- Additional Assessment offers are made by the School and the student will be informed directly once these are made available.
Students who have a disability and wish to seek modified submission or assessment arrangements need to contact the University Disability Services at 83135962 or disability@adelaide.edu.au for supporting documentation and then communicate these to the Course Coordinator in person through appointment during the assigned office hours.
Elite Athlete:
Students who have national/international sporting commitments and wish to seek modified submission or assessment arrangements need to register with the University Elite Athlete Support Scheme at http://www.adelaide.edu.au/eliteathletes/ and then communicate this to the Course Coordinator in person through appointment during the assigned office hours.Course Grading
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through .
-
Student Feedback
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
-
Student Support
- Academic Integrity for Students
- Academic Support with Maths
- Academic Support with writing and study skills
- Careers Services
- Library Services for Students
- LinkedIn Learning
- Student Life Counselling Support - Personal counselling for issues affecting study
- Students with a Disability - Alternative academic arrangements
-
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangements Policy
- Academic Integrity Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs Policy
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment Policy
- Reasonable Adjustments to Learning, Teaching & Assessment for Students with a Disability Policy
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
-
Fraud Awareness
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.
The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.
