C&ENVENG 7112 - Advanced Civil Geotechnical Engineering

North Terrace Campus - Semester 1 - 2020

This course seeks to extend students who wish to attain advanced knowledge and skills in geotechnical engineering. The course includes the treatment of problematic soils, the design of foundations on expansive soils, engineering logging of soils, and an introduction to critical state and unsaturated soil mechanics.

Open All

Course Details

Course Code	C&ENVENG 7112
Course	Advanced Civil Geotechnical Engineering
Coordinating Unit	School of Civil, Environmental & Mining Eng
Term	Semester 1
Level	Postgraduate Coursework
Location/s	North Terrace Campus
Units	3
Contact	Up to 3 hours per week
Available for Study Abroad and Exchange	N
Prerequisites	C&ENVENG 7069
Assessment	Exam, Coursework

Course Staff

Course Coordinator: Emeritus Professor Mark Jaksa

Course Coordinator and Lecturer: Dr An Deng
Room N144, Engineering North Building, an.deng@adelaide.edu.au, phone: 8313 2830

Lecturer: Professor Mark Jaksa
Room N140, Engineering North Building, mark.jaksa@adelaide.edu.au, phone: 8313 4314

Course Timetable

The full timetable of all activities for this course can be accessed from .

A weekly timetable will be available to students through MyUni.

Course Learning Outcomes

On successful completion of this course students will be able to:

1	Explain and differentiate between the nature, formation and behaviour of the following problematic soils: expansive soils, collapsing soils, soft, quick and dispersive clays, liquefiable soils, organic soils and acid sulphate soils;
2	Calculate the characteristic surface movement of a soil profile;
3	Evaluate total soil suction and interpret soil suction profiles;
4	Design residential footings founded on expansive soils using the following methods: deemed-to-comply; engineering principles; and probabilistic charts;
5	Assess and report on the likely cause of distress to residential structures and recommend appropriate remediation options;
6	Recommend appropriate design solutions for each the following problematic soils: collapsing soils, soft, quick and dispersive clays, liquefiable soils, organic soils and acid sulphate soils;
7	Create engineering borelogs by manually logging soils;
8	Estimate soil reactivity using the visual-tactile method;
9	Design pile foundations to support lateral loads; and
10	Calculate and interpret soil properties using the critical state soil mechanics theoretical framework.

The above course learning outcomes are aligned with the Engineers Australia .
The course is designed to develop the following Elements of Competency: 1.1 1.2 1.3 1.4 1.5 1.6 2.1 2.2 2.3 2.4 3.1 3.2 3.3 3.4 3.6

University Graduate Attributes

This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:

University Graduate Attribute	Course Learning Outcome(s)
Deep discipline knowledge informed and infused by cutting edge research, scaffolded throughout their program of studies acquired from personal interaction with research active educators, from year 1 accredited or validated against national or international standards (for relevant programs)	1 - 10
Critical thinking and problem solving steeped in research methods and rigor based on empirical evidence and the scientific approach to knowledge development demonstrated through appropriate and relevant assessment	1 - 10
Teamwork and communication skills developed from, with, and via the SGDE honed through assessment and practice throughout the program of studies encouraged and valued in all aspects of learning	4, 7, 10
Career and leadership readiness technology savvy professional and, where relevant, fully accredited forward thinking and well informed tested and validated by work based experiences	1 - 10
Intercultural and ethical competency adept at operating in other cultures comfortable with different nationalities and social contexts able to determine and contribute to desirable social outcomes demonstrated by study abroad or with an understanding of indigenous knowledges	1 - 10
Self-awareness and emotional intelligence a capacity for self-reflection and a willingness to engage in self-appraisal open to objective and constructive feedback from supervisors and peers able to negotiate difficult social situations, defuse conflict and engage positively in purposeful debate	1 - 10

Learning Resources

Required Resources

Lectures notes will be provided and these will be available on MyUni. The computer analysis program, SLOG, will be used to design footings on expansive soils and it will be available in the CATS (Computer Assisted Teaching Suites) in the Inkgarni Wardli Building.

Recommended Resources

References for additional resources are provided in the lecture notes.

Online Learning

All required learning resources and course information will be made available on MyUni.

Learning & Teaching Modes

The course will be delivered in the format of lectures and interactive learning modules supported by problem-solving tutorials developing material covered in lectures. In addition, laboratory classes will be used to develop skills in the engineering logging of soils.

Workload

The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

Activity	Contact Hours	Independent Study Hours	Total
Lectures & interactive learning modules	26	0	26
Tutorials	6	12	18
Practical	1	2	3
Assignments (x3, formative)	0	50	50
Exam preparation	0	48	48
Exam (x1, summative)	2	0	2
Total	35	112	147

Learning Activities Summary

The course will explore the following topics:

Expansive Soils
- Characteristics of Expansive Soils
- Design of Residential Footings on Expansive Soils
- Assessment and Rehabilitation of Cracked Structures
Collapsing and Other Problematic Soils (soft, quick and dispersive clays, liquefiable soils, organic soils and acid sulphate soils)
Engineering Logging of Soils
Advanced Pile Design
Critical State Soil Mechanics

The University's policy on Assessment for Coursework Programs is based on the following four principles:

Assessment must encourage and reinforce learning.
Assessment must enable robust and fair judgements about student performance.
Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
Assessment must maintain academic standards.

Assessment Summary

Assessment Task	Weighting (%)	Individual/ Group	Formative/ Summative	Due (week)*	Hurdle criteria	Learning outcomes
Assignment 1 Soil Borelog Report	15	Group	Formative	Weeks 3-6		2. 7. 8.
Assignment 2 Residential Footing Design	25	Group	Formative	Week 10		4.
Assignment 3 Critical State and Unsaturated Soil Mechanics	10	Individual	Formative	Week 12		9.
Exam	50	Individual	Summative	Exam Period	Min 40%	1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
Total	100

* The specific due date for each assessment task will be available on MyUni.

This assessment breakdown is registered as an exemption to the University's . The exemption is related to the Procedures clause(s): 1. a. i 1. c.

Due to the current COVID-19 situation modified arrangements have been made to assessments to facilitate remote learning and teaching. Assessment details provided here reflect recent updates.

As Assignment 1 has been cancelled, along with the end-of-semester examination, the following revisions have been made to the assessment in this course:
Assignment 1: Cancelled
Assignment 2: 70%
Assignment 3: 30%
Examination: Cancelled.

Both Assignments 2 and 3 will be taken individually, i.e no longer in pairs. Details of Assignment 2 will be uploaded by Friday April 3.

Assessment Related Requirements

Assignments 1 and 2 will be undertaken in pairs and students will submit a joint report.

Students will be permitted to choose their partners on MyUni.

For Assignment 2, the commercial software SLOG will be used to assist in the design of the residential footing founded on expansive soil. The software will be made available to students and will be demonstrated in lectures.

Assignments 3 and 4 will be undertaken individually.

Requests for exemption from coursework components will only be considered when presented on an . All exemption requests must be made by the end of Week 3 of Semester. Exemptions will not be considered for exams or in-class quizzes.

This course includes peer assessment for the tasks undertaken within groups. Further detail of the peer assessment is contained on
MyUni. To maintain the integrity of the assessment tasks there is a requirement that all students within a group contribute to each assessment task. Where there is evidence that group members have not sufficiently contributed to a group assessment task, the may be applied.

Assessment Detail

Further details of each assignment will be provided in lectures and via MyUni well before the due date.

Submission

The submission time for all assessment tasks in this course is 4 pm on the due date, unless otherwise specified.

Details of the submission process will also be provided in lectures and via MyUni as part of the information provided relevant to the assignments.

Course Grading

Grades for your performance in this course will be awarded in accordance with the following scheme:

M10 (Coursework Mark Scheme)
Grade	Mark	Description
FNS		Fail No Submission
F	1-49	Fail
P	50-64	Pass
C	65-74	Credit
D	75-84	Distinction
HD	85-100	High Distinction
CN		Continuing
NFE		No Formal Examination
RP		Result Pending

Further details of the grades/results can be obtained from Examinations.

Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.

Final results for this course will be made available through .

Student Feedback

The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.

SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
Student Support
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
Fraud Awareness

Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.

The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.

Authorised by:	Deputy Vice-Chancellor and Vice-President (Academic)
Maintained by:	Course Outlines Administrator

成人大片