DESST 3513 - Design Studio V
North Terrace Campus - Semester 1 - 2018
-
General Course Information
Course Details
Course Code DESST 3513 Course Design Studio V Coordinating Unit School of Architecture and Built Environment Term Semester 1 Level Undergraduate Location/s North Terrace Campus Units 6 Contact Up to 6 hours per week Available for Study Abroad and Exchange Y Assumed Knowledge DESST 2519 or DESST 2501 Restrictions Available to B.ArchDes students only Quota A quota will apply Assessment Quizzes, physical model making, digital models, hand drawing and digital drawing Course Staff
Course Coordinator: Dr James Curry
Course Timetable
The full timetable of all activities for this course can be accessed from .
-
Learning Outcomes
Course Learning Outcomes
On successful completion of this course students will be able to:
1. Strategize with a building's program.
2. Think creatively about building and planning constraints.
3. Strategize the relationship between structure and program.
4. Develop design skills that work systematically with design metrics- particularly a module/ grid.
5. Discuss and design in section.
6. Strategize a building's relationship with its urban setting.University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Deep discipline knowledge
- informed and infused by cutting edge research, scaffolded throughout their program of studies
- acquired from personal interaction with research active educators, from year 1
- accredited or validated against national or international standards (for relevant programs)
1,5,6 Critical thinking and problem solving
- steeped in research methods and rigor
- based on empirical evidence and the scientific approach to knowledge development
- demonstrated through appropriate and relevant assessment
1,2,3,4,5,6 Teamwork and communication skills
- developed from, with, and via the SGDE
- honed through assessment and practice throughout the program of studies
- encouraged and valued in all aspects of learning
2,6 Career and leadership readiness
- technology savvy
- professional and, where relevant, fully accredited
- forward thinking and well informed
- tested and validated by work based experiences
2,3,4,6 Self-awareness and emotional intelligence
- a capacity for self-reflection and a willingness to engage in self-appraisal
- open to objective and constructive feedback from supervisors and peers
- able to negotiate difficult social situations, defuse conflict and engage positively in purposeful debate
5,6 -
Learning Resources
Required Resources
Specific information on the development of the City of Adelaide is available through the Government of South Australia’s website. The development plan can be obtained at:
http://www.sa.gov.au/topics/housing-property-and-land/building-and-development/building-and-development-applications/development-plans-and-their-use/access-development-plans/online-development-plans/greater-metropolitan-adelaide-development-plans/adelaide-city-development-plan
Further relevant information is given in the handout for each session / assignment, and made accessible through MyUni.Recommended Resources
Reference Library:
Aurora FernaÌ脗聛ndez & Javier Mozas, 10 stories of collective housing:graphical analysis of inspiring masterpieces.2013 Call:728.314 F3637t
Aurora FernaÌ脗聛ndez Per, Javier Mozas, Javier Arpa, Form & Data. Collective Housing Projects: An Anatomical Review Call:728.314 F3637f
Aurora FernaÌ脗聛ndez Per, Javier Mozas, Javier Arpa, Density is Home, 2011 Call: 728.314 F3637d
Aurora FernaÌ脗聛ndez Per, Javier Mozas, Javier Arpa, This is Hybrid, 2011 Call: 720 F3637t (3hr reserve)
Manuel Gausa, Housing: New Alternatives, New Systems Call: 728.094 G274h
Housing Tactics, Praxis 3 (2002)
SELF-SUFFICIENT Housing (Actar, 2006) Call: 720.47 I5929s
Oliver. Heckmann Friederike Schneider, Floor Plan Manual Housing: 4ed 2011. Call: ebook
Gustau Gili Galfetti, Model Apartments: Experimental Domestic Cells (1998) interlibrary loan
Paul Lewis, Marc Tsurumaki, David J. Lewis, Manual of Section; 2016 Call: 720.222 L6754m
Precedent List:
Slab:
Simmons Hall Dorms, Stephen Holl, 2002
Unite D’habitation - Le Corbusier, Marseille, France 1946 to 1952
Baker Dorms, Alvar Aalto, 1948
Slither, Gifu Housing, Diller+Scofidio, 2003
Women’s Dormitory, Kazuyo Sejima, 1990
Gifu Housing, Kazuyo Sejima, 2000
Kleiburg Bijlmermeer Housing Block Transformation, Greg Lynn 2001
Marlies Rohmer, Smarties Student Housing, Utrecht, 2003-08
Interbau Apartment House, Oscar Niemeyer and Soares Filho, Berlin 1957
Living Steel Housing, N_architects, 2007
Wozoco Housing, MVRDV, 1997
Tower
Peabody Terrace, Jospeh Lluis Sert, 1962
Nakagin Capsule Tower, Kurokawa, 1972
Ftown Building, Hitoshi Abe, 2007
Bosco Verticale, Boeri Studio, 2012
56 Leonard Street, Herzog and DeMeuron, 2014
Lewis-Tsurumaki-Lewis, Park Tower, 2010
Courtyard
Tietgen Dormitory, Lundgaard & Tranberg Architects, 2008
Morphosis, Toronto Graduate Student Housing, 1998-2000
Celosia Building, MVRDV, 2009
Module
Eero Saarinan, Hill College House, University of Pennsylvania, Philadelphia, 1958
Paul Rudolph, Married Student Housing, Yale University, New Haven, 1960-61
Louis Kahn, Erdman Hall, Bryn Mawr, 1965
qubic, HVDN, 2008
Sociopolis Development
Speaker Series:
The School has a fortnightly lecture series where respected practitioners and academics from the field deliver a public lecture on contemporary architectural practice. In order to expand your knowledge of contemporary directions in design it is recommended that you attend these sessions. The sessions are scheduled for Tuesday 6pm at the Horace Lamb Lecture Theatre, and the exact detail of dates and speakers is available from the School website and the Front Office.
Academic Support:
The Professions Learning Centre (PLC) provides postgraduate coursework students of the Faculty of Professions free academic skills advice on critical analysis and structuring assignments, paraphrasing, referencing, oral presentation skills and other skills to assist with success at university. You are encouraged to take advantage of the service to enable you to improve your performance in your studies. To contact a Learning Advisor please send an email to professions.learningcentre@adelaide.edu.au.Online Learning
All course material, assignments, texts, etc. will consecutively be made available through MyUni.
University Email:
The school uses the University email system to get in touch with the students. So it is imperative that you check your email regularly and keep up to date with any new announcements.Noticeboard/Handbook:
General information about the activities at the School is available online from the Student Noticeboard which can be accessed at . Students can also access a copy of the Student Handbook at the following link: .
-
Learning & Teaching Activities
Learning & Teaching Modes
Lectures: lectures to give an outline of work to be covered and strategies to approaches to design approaches
Tutorials: studio workshops consisting of exercises and project work; scaled or prototype production of design objects. Students are required to present their work each week in tutorials, subjecting it to analysis, critique and response by staff and fellow students.
Workload
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
The University expects full-time students (ie. those taking 12 units per semester) to devote at least 48 hours per week to their studies. Accordingly, students undertaking this 6 unit course are expected to devote 24 hours per week to contact activities and self-guided studies.
Based on this framework here are some figures that might assist workload management:
Total workload hours: 24 Hrs per week x 13 weeks = 312 Hrs
Total contact hours: 6 Hrs per week x 12 weeks = 726 Hrs
Total self-guided study: 312 Hrs – 72 Hrs = 240 HrsThese 240 hours should be used towards preparation of weekly tasks and for completion of the various assignments associated with the course, including development of various skills required to complete the same. Please organise your time wisely.
Learning Activities Summary
Week Lecture Task Tutorial Week 1 Welcome: Introduction to the Course
Site Model
1:200 and 1:500No Tutorials
(After lecture assign individual Site Model tasks)Week 2 Urban Analysis:
Defining the Site, Topography, ExperienceSite Analysis
Density Model(s)Site Model 1:500 Due
Workshop Task:
Density and Public Space
Week 3
Guest Lecture: Nick Roach
Structure (Arups)Site as Generative
Informal & Formal Grids-
Massing ModelReview Site Analysis
Workshop Task:
Site as Generative
Informal & Formal Grids-
Subtraction ModelWeek 4 Guest Lecture: Tom Doull
Beyond Housing:
Typology of Dwelling ArrangmentsDiagram:
4 Itineries &
Public / Private RelationDue Assign 1: 20 March
Preliminary Analysis and Design 15%
Review Site Model 1:200
Site as Generative
Informal & Formal Grids-
Massing and Subtrction Model
Week 5 Sections:
Topography, Light, Sequence
Draw 3 Sections:
Scale: 1x 1: 500,
2 x 1: 200Review
4 Itineries &
Public / Private Relation
Workshop 3:
Draw 2 Sections:
Scale: 1x 1: 500,
1 x 1: 2002 Week Non-Teaching Break Week 6 Rendering Atmosphere & Effect:
Imaging StructureProjecting and Imaging Structure
Structure v Program Section Model 1:100Review Sections
Nick Roach Structure (Arups) Invited Critic
Projecting and Imaging Structure +
Structure v Program Section Model 1:100Week 7 Scale and Landscape Wrapping and Silhouette Task
Topological Rendering/ Section 1:500Due:Assign II: 24 April
Mid Review 35% (+ upload)Week 8 No Lecture; Students to attend
Speaker Series Lecture on Housing
Ling Hao Architecture (Mandatory)Desk Reviews Week 9 Vertical City AnalogyPublic v Private Desk Reviews Week 10 Managing Graphics:
Sheets and stipulated template layout issued.
Different mock up for each tutorial group.
Same Font SpecificationSubmit Draft of Final Drawings (7days)
Desk Reviews
Week 11No Lecture Final Drawings (7 days)
Review Submitted DraftWeek 12 No Lecture Final Juries Due: Assign III: 29 May
Final Design 50%Specific Course Requirements
1.For this course you will need the ability to construct physical models, be familiar with Adobe Photoshop, and InDesign, as well as a CAD drafting package (and learn by doing).
2. Students must achieve a minimum of 40% for the Final Assignment to Pass the course.
3. In addition, students must present their work in Week 12 to Pass the course; a schedule will be provided on MyUni.
Students are expected to listen to the presentations by all their peers.
Failure to attend teaching due to medical, compassionate or extenuating circumstances is dealt with the School Policy, administered by the School Office. Submit the appropriate application for supplementary consideration together with the original signed medical or other relevant officer, to the School Office. If you foresee a problem contact the Course Coordinator BEFORE the problem actually occurs. Otherwise, contact the Course Coordinator as soon as possible and submit the appropriate application for supplementary consideration to the School Office.
If you choose to visit the site , ensure that you exercise respect for the owners and patrons, obtain permission to enter the building if required, and observe an appropriate duty of care during your visit.
Students who miss more than 25% of the scheduled teaching (lectures, studios, field trip) and whose overall mark is below 45 will not automatically be granted extensions and/or replacement examinations, even if the application is submitted.Small Group Discovery Experience
There is no specifically designated Small Group Discovery Experience for DSV although the culture of the studio will automatically generate small group discovery. -
Assessment
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Summary
Further relevant information for assignments will be made accessible through MyUni.
The course is structured into individual tasks, whose outcomes are discussed in the pin-up sessions, subjecting it to analysis, critique and response by staff and students. The pin-up sessions are the main source of feedback. Students are encouraged to take notes in order to effectively implement the feedback into their ongoing design development. Detailed information on task type, learning objectives and assessment criteria is given in the individual handout for each session.
Grading is based on a comparison with current and previous student work, and with the instructors’ expectations relative to the objectives of the course.
A cumulative assessment, agreed on by all critics, will based upon the following criteria: (1) strength of the con¬cept (2) consistent and rigorous articulation and development of the concept (3) technical competency, clarity, precision, craft and timely completeness of the work submitted (4) verbal and graphic presentation, of the work during formal juries. (5) commitment, dedication and intensity of work ethic, i.e. the intangible factors which go beyond talent or gifted physical/mental abilitiesAssessment Task
(No. & Name)Present/Submit Weight Submission Method Learning Outcomes
(being assessed)Urban Analysis In Tutorial 15 % Online & In Tutorial 1, 3 Mid-Review Online & In Tutorial 35% Online & In Tutorial 1, 2, 3, 4, 5 Final Review Online & In Gallery 50% Online & In Gallery 1, 2, 3, 4, 5, 6 Assessment Related Requirements
Attendance is compulsory at the Monday lectures (where also each session / assignment is introduced) and at the weekly studio pin-up. Weekly tasks are specified in handouts.
Although the teaching–staff aim to accommodate (where possible) the wide variety of ‘personal issues’ that can impinge upon a student’s ability to attend all lectures and tutorials throughout the semester, students must attend a mandatory 80% of the scheduled tutorials. This requirement has been instigated in order to aid students in gaining appropriate competency standards in the subject matter, and aid in the student’s ability to apply this knowledge through set assessment tasks.
It is expected that you will come to tutorials prepared with equipment, materials, and ongoing work for discussion
You must keep every sketch, text, concept model, to assist your practice of thinking and making; these are part of the process of design, and can be crucial to the final outcome; studio staff will often ask you to show them this work, and sometimes this work becomes relevant at the oddest moments.
You are expected to produce work between one studio session and the next. If you do not have work to discuss with staff in studio then there can be no feedback; research and process are the methods of a design practice. Part of the process is showing, sharing, and talking.
Do not sit in studio waiting for someone to come and talk to you, studio is a place for you to work, (that’s what it’s for), this can be drawing, writing, reading, making – and the library is one of your prime resources
Assessment Detail
Marking & Feedback (General)
- Final results for the course will only be available through Access Adelaide and students should not contact the course coordinator or the tutors for the same.
- Feedback for in-class submissions will only be available during the tutorial as oral critique in the style of studio wall-crits. Students should arrange with peers to make notes for reference.
The work discussed in the pin-up session is submitting as a collated document of 3 individual tasks. Presentations may be public. Due to the guests varying time schedules the date for the presentation might change, and notice will be given via MyUni. Presenting in your work should be considered as part of the submission, failing to present may be considered a late.
In week 15 a selection of the most innovative work from this studio be exhibited in the School of Architecture and Built Environment’s ‘All-In’ public exhibition. Details of which will be provided at a later date.
Submission
Submissions (General):
-
All submissions must include Student Name and Student ID Number. Submissions without Student Name or ID Number will not be considered for marking, and will receive zero marks in accordance with the guidelines.
-
In addition, all assigments need to have an Assignment Cover Sheet which must be signed and dated by the student before submission. Please attach the cover sheet in front of the document, to the top left hand corner.
-
Please adhere to submission deadlines and follow instructions provided.
-
Students must not submit work for an assignment that has previously been submitted for this course or any other course without prior approval from the Course Coordinator.
-
On occasion, the lecturer/tutor may wish to retain students’ work for future reference and the relevant student will be informed at such a time.
Early Submission:
-
There is an early submission box located on Level 4 which is cleared out daily at 10am. Please mark your submission clearly before placing in box.
-
Models for in-class presentation cannot be handed in early.
Late Submission:
-
The school will NOT accept late submissions and any such assignment will receive zero marks. This also applies to electronic submissions.
-
Printing delays & hard disk crashes will not be entertained as legitimate causes for delay, so please ensure that the work is finished in advance.
Re-submission:
-
The school has a resubmission policy whereby students can redeem failed work by submitting additional work for a maximum of 50%.
-
The deadline for all re-submissions is 12pm on Friday 16th June 2017.
Good practice:
-
Students should ensure that they regularly backup their work on multiple locations as hard-disk crashes are an unfortunate reality.
-
When relying on community printing facilities, students should attempt to finish their work in advance to avoid unnecessary delays.
-
Students must retain a copy of all assignments submitted (digital or hardcopy), as originals may be lost during the submission process.
For modified arrangements of submission and assessment due to special circumstances see the following Assessment Task Extension(s) & Additional Assessment guidelines.
Modified Arrangements (General)
- Students can apply for extensions or modified arrangements based on Medical conditions or other Extenuating circumstances. However, students need to submit their application along with supporting documents within 5 business days of the condition becoming applicable.
- The application forms are available from the Front Office and at and need to be submitted at the Front Office along with any supporting documentation.
- Please note that submitting an application does not guarantee acceptance and the Course Coordinator will inform the applicant if the application is accepted. Please DO NOT contact the Course Coordinator directly.
Medical Reasons:
- In case of an extended medical condition which makes it impossible for the student to submit the work on time, an Application for Assessment Task Extension due to Medical Circumstances may be lodged with the Front Office along with a doctor’s certificate within 5 business days.
Extenuating Circumstances:
- If the student is unable to submit the work on time due to extenuating circumstances an Application for Assessment Task Extension due to Extenuating Circumstances may be lodged with the Front Office.
- Please note that this is only available for certain military, religious, or legal obligations and does not extend to minor personal problems. (Refer to Student Handbook at for further details or contact Student Advisor).
Compassionate Grounds:
- In case of certain extraordinary personal problems students can apply for extensions based on compassionate grounds. However, these must first be discussed with the Course Coordinator in person through appointment during the assigned office hours.
- To maintain privacy relating to personal issues students can contact the Counselling Service on 83035663 for an individual appointment.
Additional Assessment:
- If a student receives a Fail grade for the course with an overall mark between 45 and 49, they may be eligible for an Additional Assessment which would allow them to get a maximum of 50 Pass for the Course.
- Additional Assessment offers are made by the School and the student will be informed directly once these are made available.
Disability:
- Students who have a disability and wish to seek modified submission or assessment arrangements need to contact the University Disability Services at 83135962 or disability@adelaide.edu.au for supporting documentation and then communicate these to the Course Coordinator in person through appointment during the assigned office hours.
Elite Athlete:
- Students who have national/international sporting commitments and wish to seek modified submission or assessment arrangements need to register with the University Elite Athlete Support Scheme at and then communicate this to the Course Coordinator in person through appointment during the assigned office hours.
Course Grading
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through .
-
Student Feedback
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
-
Student Support
- Academic Integrity for Students
- Academic Support with Maths
- Academic Support with writing and study skills
- Careers Services
- Library Services for Students
- LinkedIn Learning
- Student Life Counselling Support - Personal counselling for issues affecting study
- Students with a Disability - Alternative academic arrangements
-
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangements Policy
- Academic Integrity Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs Policy
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment Policy
- Reasonable Adjustments to Learning, Teaching & Assessment for Students with a Disability Policy
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
-
Fraud Awareness
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.
The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.