C&ENVENG 4111 - Structural Dynamics & Applications

North Terrace Campus - Semester 2 - 2017

This course aims to equip students with knowledge in structural dynamics, with particular emphasis on the building and bridge structures. Topics include single-degree-of-freedom (SDOF) systems, response to harmonic loading, response to impulsive transient loading, numerical integration, element stiffness, mass and damping matrices, multi-degree-of-freedom (MDOF) systems, classical and non-classical damping, distributed parameter systems, eignevalue problems, modal analysis and system identification.

Open All

Course Details

Course Code	C&ENVENG 4111
Course	Structural Dynamics & Applications
Coordinating Unit	School of Civil, Environmental & Mining Eng
Term	Semester 2
Level	Undergraduate
Location/s	North Terrace Campus
Units	3
Contact	Up to 3 hours per week
Available for Study Abroad and Exchange	Y
Assumed Knowledge	MATHS 1012, C&ENVENG 3001
Restrictions	Available to BE (Civil & Struct), BE (Architectural) and associated double degrees only
Assessment	Assignments, quizzes, project, final exam

Course Staff

Course Coordinator: Professor Alex Ching-Tai Ng

Course Timetable

The full timetable of all activities for this course can be accessed from .

Course Learning Outcomes

On successful completion of this course students will be able to:

1	Recognise physical phenomenon in the context of structural vibration.
2	Identify and define key concepts related to structural dynamics, such as natural frequencies, modeshapes, damping and vibration characteristics of structures.
3	Formulate the equation of motion for dynamics analysis of structures.
4	Demonstrate an understanding the assumptions and limitations of the structural dynamics theories.
5	Develop competence in using computer programming skill (e.g. Matlab) to perform modelling and dynamic analysis of structural systems.
6	Design structures with the consideration of structural dynamics.
7	Solve engineering problems in the context of structural dynamics.

The above course learning outcomes are aligned with the Engineers Australia .
The course is designed to develop the following Elements of Competency: 1.1 1.2 1.3 1.4 1.5 1.6 2.1 2.2 2.3 2.4 3.2 3.3 3.4 3.6

University Graduate Attributes

This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:

University Graduate Attribute	Course Learning Outcome(s)
Deep discipline knowledge informed and infused by cutting edge research, scaffolded throughout their program of studies acquired from personal interaction with research active educators, from year 1 accredited or validated against national or international standards (for relevant programs)	1-4
Critical thinking and problem solving steeped in research methods and rigor based on empirical evidence and the scientific approach to knowledge development demonstrated through appropriate and relevant assessment	1-7
Teamwork and communication skills developed from, with, and via the SGDE honed through assessment and practice throughout the program of studies encouraged and valued in all aspects of learning	5-7
Career and leadership readiness technology savvy professional and, where relevant, fully accredited forward thinking and well informed tested and validated by work based experiences	1-7
Intercultural and ethical competency adept at operating in other cultures comfortable with different nationalities and social contexts able to determine and contribute to desirable social outcomes demonstrated by study abroad or with an understanding of indigenous knowledges	5-7
Self-awareness and emotional intelligence a capacity for self-reflection and a willingness to engage in self-appraisal open to objective and constructive feedback from supervisors and peers able to negotiate difficult social situations, defuse conflict and engage positively in purposeful debate	5,6

Learning Resources

Required Resources

Powerpoint slides are available on MyUni.

Recommended Resources

Textbook:
“Dynamics of Structures” by Ray W. Clough and Joseph Penzien, Computers & Structures, Inc., 2003.

References:
“Structural Dynamics – Theory and Computation” by Mario Paz, 1997.

“Dynamics of Structures – Theory and Applications to Earthquake Engineering” by Anilk. Chopra, Prentice-Hall, 2007.

Online Learning

All course material including lecture slides, assignments and group project will be made available on MyUni throughout the semester.

MyUni will be used to support the in-class teaching. The Discussion Board in MyUni will provide additional support for students to have discussions related to this course. It is strongly recommended that students use the Discussion Board.

The lecturers will typically be recorded but they should be consdiered complementary to, rather than a substitute for, attendance. In the event of technical failure it will be the student's responsibility to find an alternative source of information.

Course announcements will be proivded on MyUni regularly throughout the course. It is students' responsibility to check MyUni regularly.
Learning & Teaching Activities

Learning & Teaching Modes

Teaching for this class will consist primarily of lectures where the fundamental theory will be presented, followed by examples to illustrate how the theory can be applied to solve structural dynamics problems. Students will develop their understanding of the course content through reading of the textbook, practice problem solving through the tutorial questions and attendance at lectures where problem solving strategies are presented and discussed.

Workload

The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

There is 3 hours contact study each week in the semester. It is expected that students will spend another 6 hours per week outside of class studying the material and practising their problem solving
with examples from the textbook.

Learning Activities Summary

Lecture Topics:
1. Fundamental concept
2. Free vibration of SDOF systems
3. Forced vibration of SDOF systems
4. Free vibration of MDOF shear buildings
5. Forced vibration of MDOF shear buildings
6. Beam and frame MDOF systems
7. Applications of structural dynamics

Note: These are planned topics in the course. Some topics may be changed, added or deleted as appropriate.

The University's policy on Assessment for Coursework Programs is based on the following four principles:

Assessment must encourage and reinforce learning.
Assessment must enable robust and fair judgements about student performance.
Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
Assessment must maintain academic standards.

Assessment Summary

Assessment Task	Weighting (%)	Individual/ Group	Formative/ Summative	Due (week)*	Hurdle criteria	Learning outcomes
Assignment	15	Individual	Formative	Weeks 2-12		1. 2. 3. 4. 6. 7.
Quiz	10	Individual	Summative	Week 7		1. 2. 3. 4. 7.
Group Project	15	Group	Summative	Week 12		1. 2. 3. 4. 5. 6. 7.
Exam	60	Individual	Summative		Min 40%	1. 2. 3. 4. 6. 7.
Total	100

* The specific due date for each assessment task will be available on MyUni.

This assessment breakdown complies with the University's Assessment for Coursework Programs Policy.

This course has a hurdle requirement. Meeting the specified hurdle criteria is a requirement for passing the course.

Assessment Related Requirements

Consistent with School policy, in order to pass the course, students must obtain at least 40% in the examination. If the exam hurdle is not met students will receive a course result of the lesser of their calculated grade and the nominal grade of 45 (Fail). In addition, and in accordance with , students must complete all assignments and the group project to be eligible for an Additional Assessment.

Requests for exemption from coursework components will only be considered when presented on an Exemption from Attendance Form. All exemption requests must be made by the end of Week 3 of Semester. Exemptions will not be considered for exams or in-class quizzes.

Intelligible English expression (for all assessments) and legible hand-writing (for exam) are considered to be integral parts of the assessment process, and may affect marks.

This course includes peer assessment for the tasks undertaken within groups. Further detail of the peer assessment is contained on MyUni. To maintain the integrity of the assessment task(s) there is a requirement that all students within a group contribute to each assessment task. Where there is evidence that group members have not sufficiently contributed to a group assessment task, the policy may be applied.

Assessment Detail

Further details of each assessment will be provided in lectures and/or via MyUni well before the due date.

Submission

Digital submissions should be submitted by the appropriate MyUni portal for the particular assessment. Further information will be provided through the course’s MyUni website.

Late submissions will only be accepted for the projects. There will be a loss of 10% of the marks obtained if the submission is less than 24h late, 20% if the submission is between 24 and 48h late and so on. Extensions will only be granted in special circumstances (e.g. illness) and must be sought for each assessment task individually. Extensions will not be granted less than 24h before the deadline for a given task, with the exception of a medical certificate.

Course Grading

Grades for your performance in this course will be awarded in accordance with the following scheme:

M10 (Coursework Mark Scheme)
Grade	Mark	Description
FNS		Fail No Submission
F	1-49	Fail
P	50-64	Pass
C	65-74	Credit
D	75-84	Distinction
HD	85-100	High Distinction
CN		Continuing
NFE		No Formal Examination
RP		Result Pending

Further details of the grades/results can be obtained from Examinations.

Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.

Final results for this course will be made available through .

Student Feedback

The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.

SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
Student Support
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
Fraud Awareness

Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.

The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.

Authorised by:	Deputy Vice-Chancellor and Vice-President (Academic)
Maintained by:	Course Outlines Administrator

成人大片