MINING 7074B - Masters Mining Engineering Project Part B
North Terrace Campus - Semester 1 - 2022
-
General Course Information
Course Details
Course Code MINING 7074B Course Masters Mining Engineering Project Part B Coordinating Unit School of Civil, Environmental & Mining Eng Term Semester 1 Level Postgraduate Coursework Location/s North Terrace Campus Units 12 Contact Up to 480 hours over one year Available for Study Abroad and Exchange N Prerequisites MINING 7074A in the previous Semester Restrictions Restricted to BE(Mining) and associated Programs Assessment Project plan, presentation, journal paper Course Staff
Course Coordinator: Dr An Deng
Course Timetable
The full timetable of all activities for this course can be accessed from .
See Course Planner and/or the Course Profile on MyUni. -
Learning Outcomes
Course Learning Outcomes
On successful completion of this course students will be able to:
1 Independently locate sources of information that will assist with the understanding of a technical problem that has not previously been encountered. 2 Critically evaluate the validity, coverage and gaps in such sources of information. 3 Develop a statement of a research question or hypothesis, identifying an issue of which there is incomplete understanding. 4 Design and execute an investigation, experiment or theoretical study to answer the research question. 5 Present the background and findings of the research investigation in multiple formats 6 Apply an advanced level of technical understanding in multiple areas of technical specialisation to devise solutions to complex technical problems. 7 Work cooperatively and flexibly as a member of a team, contributing to team leadership as the situation requires. 8 Write and verbally communicate, advanced technical concepts to both technically informed and lay audiences. 9 Apply project management techniques to devise and synthesise engineering solutions to complex, open ended problems.
The above course learning outcomes are aligned with the Engineers Australia .
The course is designed to develop the following Elements of Competency: 1.1 1.2 1.3 1.4 1.5 1.6 2.1 2.2 2.3 2.4 3.1 3.2 3.3 3.4 3.5 3.6
University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Attribute 1: Deep discipline knowledge and intellectual breadth
Graduates have comprehensive knowledge and understanding of their subject area, the ability to engage with different traditions of thought, and the ability to apply their knowledge in practice including in multi-disciplinary or multi-professional contexts.
3,4,6 Attribute 2: Creative and critical thinking, and problem solving
Graduates are effective problems-solvers, able to apply critical, creative and evidence-based thinking to conceive innovative responses to future challenges.
1-5 Attribute 3: Teamwork and communication skills
Graduates convey ideas and information effectively to a range of audiences for a variety of purposes and contribute in a positive and collaborative manner to achieving common goals.
7,8,9 Attribute 4: Professionalism and leadership readiness
Graduates engage in professional behaviour and have the potential to be entrepreneurial and take leadership roles in their chosen occupations or careers and communities.
1,6,7 Attribute 5: Intercultural and ethical competency
Graduates are responsible and effective global citizens whose personal values and practices are consistent with their roles as responsible members of society.
7,8 Attribute 8: Self-awareness and emotional intelligence
Graduates are self-aware and reflective; they are flexible and resilient and have the capacity to accept and give constructive feedback; they act with integrity and take responsibility for their actions.
5,7 -
Learning Resources
Required Resources
If any school resources are to be used on your project (e.g. laboratories) you are required to submit a completed and signed
Technical Resources Application Form (short referred to as TARF). These forms should be completed in collaboration with your project supervisor. The completed form should be submitted to Mr Andrew Heathershaw, Technical Operations Manager, Room M 12, Engineering North Building.Recommended Resources
Discuss with your project supervisor.Online Learning
All resources for this course are available online via MyUni. All students are required to use MyUni Groups to manage their Research
Projects (or alternative online project management portals, e.g. Teamwork, Asana, Trello etc). MyUni Groups will provide your group with a usable web space to exchange files, communicate to one another and your supervisor through Discussion Boards, and develop collaborative projects through a Wiki.
The recommended uses of MyUni Groups are:
- Discussion Board: use to communicate with your group members and project supervisor
- File Exchange: use to exchange files and store data obtained for your project
- Wiki: can be used for developing the report before the final formatting in Word
- Email: allows easier communication with your supervisor
- Blog: use to clearly illustrate the current roles of each group member and allocated tasks for each week
- Journal: store agendas and minutes for your group meetings -
Learning & Teaching Activities
Learning & Teaching Modes
This course is mainly self-directed study/group work. You must have regular weekly meetings with your supervisor and group members to discuss your project and progress.Workload
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
For a semester of this course the workload will be the equivalent time for a 3-unit course in one semester. According to university policy, this corresponds to 12 hours a week for an average student to achieve a credit.Learning Activities Summary
A set of lectures is run for this course. These lectures should be attended. Lecture sessions will be recorded.Specific Course Requirements
You must have regular weekly project meetings with your supervisor and group members. Meeting times must be arranged between your supervisor and you/your group.
Meeting minutes must be recorded and kept for each formal meeting. This document should record date, start and closing time, venue of the meeting, apologies, who attended and dscribe what was discussed and the results that were presented. Any proposed
actions should be noted int he minutes and checked at the next meeting to see if they have been carried out. In a group, taking of the minutes should be rotated amongst group members. These minutes should be posted on MyUni Groups for all your group members and project supervisor to be able to reference. -
Assessment
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Summary
* The specific due date for each assessment task will be available on MyUni.Assessment Task Weighting (%) Individual/ Group Formative/ Summative Due (week)* Hurdle criteria Learning outcomes Part 1 - Initial Project Report 25 Group Summative S1 - Wk 10 1. 2. 3. 4. 5. 6. 7. 8. 9. Part 1 - Initial Project Report Presentation 5 Group Summative S1 - Wk 14 1. 2. 3. 5. 7. 8. Part 2 - Final Report & Meeting Minutes 40 Group Summative S2 - Wk 10 1. 2. 3. 4. 5. 6. 7. 8. 9. Part 2 - Conference Paper 20 Group Summative S2 - Wk 12 1. 2. 3. 5. 7. 8. Part 2 - Conference Presentation 10 Group Summative S2 - Wk 13 1. 3. 5. 7. 8. Total 100
This assessment breakdown is registered as an exemption to the University's . The exemption is related to the Procedures clause(s): 1. a. iAssessment Related Requirements
This course includes self and peer assessment for the tasks undertaken within groups. Further details on self and peer assessment are posted on MyUni. To maintain the integrity of the assessment task(s) all students within a group contribute to each assessment task. Where there is evidence that group members have not contributed sufficiently to a group assessment task, the Academic Honesty policy may be applied.Each individual student must complete peer assessment of group members.Assessment Detail
Assessment details are stated in the course profile posted on MyUni.Submission
All project reports must be submitted in pdf form using MyUni.
Deadlines
Deadlines are an integral part of an engineer's professional life, and the discipline of getting work finished on time is an essential one to acquire. All submission deadlines are 3 pm (unless otherwise specified). Any submission made after 5 pm will be given zero.
The policy applies to all students, and students are advised to be familiar with the policy. The policy is found in the link: . Software (e.g. TURNITIN) will be used to verify the originality of submissions.
Academic Honesty PolicyCourse Grading
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through .
-
Student Feedback
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
-
Student Support
- Academic Integrity for Students
- Academic Support with Maths
- Academic Support with writing and study skills
- Careers Services
- Library Services for Students
- LinkedIn Learning
- Student Life Counselling Support - Personal counselling for issues affecting study
- Students with a Disability - Alternative academic arrangements
-
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangements Policy
- Academic Integrity Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs Policy
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment Policy
- Reasonable Adjustments to Learning, Teaching & Assessment for Students with a Disability Policy
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
-
Fraud Awareness
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.
The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.
