ELEC ENG 4064 - Business Management Systems UG
North Terrace Campus - Semester 2 - 2018
-
General Course Information
Course Details
Course Code ELEC ENG 4064 Course Business Management Systems UG Coordinating Unit School of Electrical & Electronic Engineering Term Semester 2 Level Undergraduate Location/s North Terrace Campus Units 3 Contact Up to 4 hours per week Available for Study Abroad and Exchange Y Incompatible ELEC ENG 4038 and STATS 4001 Assumed Knowledge Completion of at least two years of an engineering degree Assessment Project work and assignments Course Staff
Course Coordinator: Associate Professor Brian Ng
Lecturer: Mr Alf Grasso
Email: alfio.grasso@adelaide.edu.au
Office: Ingkarni Wardli level 3, room 3.58Course Timetable
The full timetable of all activities for this course can be accessed from .
-
Learning Outcomes
Course Learning Outcomes
On successful completion of this course students will be able to:
1 Explain the role of engineering in the context of a business, and business in society. 2 Analyse the Top-Down process of engineering: Society -> Corporation -> business units -> project 3 Explain how governance requirements and ethics drive management processes. 4 Discuss the role of the ISO 9001, ISO 14001 and OHAS 18001 standards in the development of a Business Management System (BMS). 5 Explain the role of BMS elements. 6 Apply selected basic BMS processes to the development of a product-service system. 7 Outline the key elements of an engineering management system. 8 Use key processes that govern workplace health and safety, product safety and other regulations. 9 Analyse and report on the ethical considerations that arise in the practice of professional engineering. 10 Demonstrate professional skills including participation in and running meetings; effective team membership and leadership; preparation of professional standard documentation based on templates from a business management system.
The above course learning outcomes are aligned with the Engineers Australia .
The course is designed to develop the following Elements of Competency: 1.5 1.6 2.1 2.2 2.3 2.4 3.1 3.2 3.3 3.4 3.5 3.6
University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Deep discipline knowledge
- informed and infused by cutting edge research, scaffolded throughout their program of studies
- acquired from personal interaction with research active educators, from year 1
- accredited or validated against national or international standards (for relevant programs)
1-9 Critical thinking and problem solving
- steeped in research methods and rigor
- based on empirical evidence and the scientific approach to knowledge development
- demonstrated through appropriate and relevant assessment
6,8-9 Teamwork and communication skills
- developed from, with, and via the SGDE
- honed through assessment and practice throughout the program of studies
- encouraged and valued in all aspects of learning
10 Career and leadership readiness
- technology savvy
- professional and, where relevant, fully accredited
- forward thinking and well informed
- tested and validated by work based experiences
1-10 Intercultural and ethical competency
- adept at operating in other cultures
- comfortable with different nationalities and social contexts
- able to determine and contribute to desirable social outcomes
- demonstrated by study abroad or with an understanding of indigenous knowledges
3, 9, 10 Self-awareness and emotional intelligence
- a capacity for self-reflection and a willingness to engage in self-appraisal
- open to objective and constructive feedback from supervisors and peers
- able to negotiate difficult social situations, defuse conflict and engage positively in purposeful debate
6,10 -
Learning Resources
Required Resources
Not applicableRecommended Resources
Various resources will be notified during the course.Online Learning
The course will be managed using MyUni. Course notes, assignments, and other resources will be made available on MyUni. -
Learning & Teaching Activities
Learning & Teaching Modes
Course material will be delivered by lectures in a professional workshop style that requires continuing interaction, discussion and feedback from students. Workshops and tutorials are scheduled to discuss and plan the assignments. Students will work in design teams.Workload
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
Activity Contact hours Workload hours Lecture 12 lectures 12 24 Workshops 12 workshops 24 48 Assignment 1 - Technology Plan 15 Assignment 2 - Financial Business Case 15 Assignment 3 - System Safety Management Plan 15 Assignment 4 - Ethics 25 Self Assessment and Peer Assessment 1 TOTALS 36 143 Learning Activities Summary
The topics will encompass:
• Technology planning• Governance and social responsibility• Regulations and reporting• Financial evaluation• Systems for business governance• Risk and safety management• System safety• The BMS in use• Engineering governance• Engineering management system• Other functions• The professional career
Note: This schedule is subject to change in order to meet the availability of industry guest speakers -
Assessment
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Summary
* The specific due date for each assessment task will be available on MyUni.Assessment Task Weighting (%) Individual/ Group Formative/ Summative Due (week)* Hurdle criteria Learning outcomes Technology Plan 25 Group Formative Week 3 1. 2. 3. 4. 5. 6. 7. 10. Financial Business Case 25 Group Summative Week 6 1. 2. 3. 4. 5. 6. 7. 10. System Safety Management Plan 25 Group Summative Week 9 1. 2. 3. 4. 5. 6. 7. 8. 10. Ethics 25 Individual Summative Week 12 Min 20% 9. 10. Total 100
This assessment breakdown is registered as an exemption to the University's . The exemption is related to the Procedures clause(s): 1. a. i
This course has a hurdle requirement. Meeting the specified hurdle criteria is a requirement for passing the course.Assessment Related Requirements
The assessment regime is intended to be broadly representative of the professional work environment. For this reason, and because students will work in teams, students are expected to attend all classes and tutorial/workshops.
Assignment 4 is a hurdle requirement. It is necessary to achieve at least 40% in this assignment. If this is not achieved, the total course mark will be limited to a maximum of 49.
A hurdle requirement is defined by the University's Assessment for Coursework Programs policy as "...an assessment task mandating a minimum level of performance as a condition of passing the course".
If a student fails to meet a hurdle requirement and is assigned a total mark for the course in the range of 45-49, then the student is entitled to an offer of additional assessment of some type. The type of assessment is to be decided by the School Assessment Review Committee when determining final results. The student’s final total mark will be entered at no more than 49% and the offer of an additional assessment will be specified eg. US01. Once the additional assessment has been completed, this mark will be included in the calculation of the total mark for the course and the better of the two results will apply. Note however that the maximum final result for a course in which a student has sat an additional assessment will be a “50 Pass”.
If a student is unable to meet a hurdle requirement related to an assessment piece (may be throughout semester or at semester’s
end) due to medical or compassionate circumstances beyond their control, then the student is entitled to an offer of replacement assessment of some type. An interim result of RP will be entered for the student, and the student will be notified of the offer of a replacement assessment. Once the replacement assessment has been completed, the result of that assessment will be included in the calculation of the total mark for the course.Assessment Detail
Details of each assessment task will be provided during the semester.Submission
All written submissions for formative assessment activities are to be submitted electronically on MyUni by 15:00 on the due dates.
No late submissions will be accepted. All formative assessments will have a two week turn-around time for provision of feedback to students.
Full details can be found on the School website:
Course Grading
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through .
-
Student Feedback
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
SELT feedback from 2016 and actions to address any concerns arising from this will be posted on MyUni at the commencement of the semester. -
Student Support
- Academic Integrity for Students
- Academic Support with Maths
- Academic Support with writing and study skills
- Careers Services
- Library Services for Students
- LinkedIn Learning
- Student Life Counselling Support - Personal counselling for issues affecting study
- Students with a Disability - Alternative academic arrangements
-
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangements Policy
- Academic Integrity Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs Policy
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment Policy
- Reasonable Adjustments to Learning, Teaching & Assessment for Students with a Disability Policy
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
-
Fraud Awareness
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.
The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.
