MINING 7106 - Hard Rock Mine Design & Feasibility
North Terrace Campus - Semester 1 - 2019
-
General Course Information
Course Details
Course Code MINING 7106 Course Hard Rock Mine Design & Feasibility Coordinating Unit School of Civil, Environmental & Mining Eng Term Semester 1 Level Postgraduate Coursework Location/s North Terrace Campus Units 3 Contact Up to 4 hours per week Available for Study Abroad and Exchange N Assumed Knowledge MINING 3073 or MINING 7073 Assessment Project report, final presentation, progress interviews Course Staff
Course Coordinator: Associate Professor Chaoshui Xu
Course Timetable
The full timetable of all activities for this course can be accessed from .
-
Learning Outcomes
Course Learning Outcomes
On successful completion of this course students will be able to:
1 Conduct mine design and planning, taking into account data analysis and interpretation, mine optimisation using proper geometrical, geotechnical and economic parameters, mine layout, scheduling, geomechanics and ventilation, social and environmental impacts of mining. 2 Perform mine development planning, production scheduling and equipment selection. 3 Conduct economic evaluation of mining projects. 4 Operate effectively mine design and optimisation software packages. 5 Develop team skills in project managements. 6 Advance written and oral communication skills.
The above course learning outcomes are aligned with the Engineers Australia .
The course is designed to develop the following Elements of Competency: 1.1 1.2 1.3 1.4 1.5 1.6 2.1 2.2 2.3 2.4 3.1 3.2 3.3 3.4 3.5 3.6
University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Deep discipline knowledge
- informed and infused by cutting edge research, scaffolded throughout their program of studies
- acquired from personal interaction with research active educators, from year 1
- accredited or validated against national or international standards (for relevant programs)
1,2,3,4 Critical thinking and problem solving
- steeped in research methods and rigor
- based on empirical evidence and the scientific approach to knowledge development
- demonstrated through appropriate and relevant assessment
1,2,3 Teamwork and communication skills
- developed from, with, and via the SGDE
- honed through assessment and practice throughout the program of studies
- encouraged and valued in all aspects of learning
1,2,3,5,6 Career and leadership readiness
- technology savvy
- professional and, where relevant, fully accredited
- forward thinking and well informed
- tested and validated by work based experiences
1,2,3,4,5,6 Intercultural and ethical competency
- adept at operating in other cultures
- comfortable with different nationalities and social contexts
- able to determine and contribute to desirable social outcomes
- demonstrated by study abroad or with an understanding of indigenous knowledges
5,6 Self-awareness and emotional intelligence
- a capacity for self-reflection and a willingness to engage in self-appraisal
- open to objective and constructive feedback from supervisors and peers
- able to negotiate difficult social situations, defuse conflict and engage positively in purposeful debate
5,6 -
Learning Resources
Required Resources
MTEC reading materials (available on MyUni):
· MTEC0008 - LG Geotechnical Factors in the Mine Planning and Design Process
· MTEC0011 - LG The Process of Mine Planning and Design
· MTEC0015 - LG Strategic Planning
· MTEC0018 - LG Mine Planning and Scheduling
Software Required:
· EXCEL
· Whittle
· Vulcan (Maptek)
· RocScience
· Ventsim
· TALPAC
Recommended Resources
- SME Mining Engineering Handbook, 1992. USA
- SME Mining Engineering Handbook, 2011. USA
- R2Mining, Australian Metal Cost Guide, available for short term borrowing from the School Office
- Hartman, HL. 2002. Introductory Mining Engineering, 2nd edition. Wiley, New York
- Hustrulid, W and Kuchta, M., 2006. Open Pit Mine Planning & Design, Balkema, Rotterdam
- Kennedy, BA., Editor, 1990. Surface Mining, 2nd edition, Society for Mining, Metallurgy, and Exploration, Littleton, Colorado
- ISBN 0–87335–102–9
- Noakes, M and Lanz, T. 1993. Cost Estimation Handbook for the Australian Mining Industry, Monograph No: 20/ Australasian
- Institute of Mining and Metallurgy
- Hustrulid, WA, and Bullock, R. (Editors), 2001. Underground Mining Methods: Engineering Fundamentals and International Case Studies
- (Society for Mining Metallurgy & Exploration: Littleton)
- Noakes, M 2012. Cost Estimation Handbook, second edition, Monograph No: 27, The Australasian
- Institute of Mining and Metallurgy
- MEA Mine Planning Course Learning Guide
- MEA Mining Systems Course Learning Guide
- MEA Report Writing Guide
- MEA Resource Estimation and Project Evaluation Course Learning Guide
-
Learning & Teaching Activities
Learning & Teaching Modes
- Project-based learning: This course utilises project-based learning method. Students will be given one group project to work on. Students are required to work in groups, to share the project workload and to have weekly meetings and discussions. A progress and a final report have to be submitted for assessment.
- Tutorials: Project works will be supported with tutorials/trainings as required. The content of these are aligned with the project.
- Question/Answer sessions: Project works will be supported with weekly Q/A sessions. All students are to attend these sessions.
- Group work: The project includes a number of topics/components. Each member of the group can elect to work on a specific topic of the project but all members must report their work to the group on a weekly basis. A peer review will have to be submitted by each team, indicating the proportion of each individual group member's contribution to the project. Marks will be deducted for underperforming students. Zero mark will be awarded to the student if he/she makes no contribution to the completion of the project.
Workload
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
Activity Estimated Student Workload (hours) Software training 32 Whittle optimisation 20 Mine design 40 Financial technical model 20 Interviews and final presentation 10 Report preparation 34 Total 156 Learning Activities Summary
Week Activities 1-4 Vulcan training
Whittle optimisation4-8 Mine design (open pit, underground, surface infrastructure) 9-11 Equipment selection, cost estimation, project evaluation 12 Final presentation, report preparation Small Group Discovery Experience
Students will benefit from face-to-face group discussions with the lecturer and tutors during progress interviews and Q/A sessions. -
Assessment
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Summary
Assessment Task Weighting (%) Individual/ Group Formative/ Summative Due (week)* Hurdle criteria Learning outcomes Progress Interview 1 10 Group Summative Week 4 1. 2. 3. 4. 5. 6. Progress Interview 2 15 Group Summative Week 8 1. 2. 3. 4. 5. 6. Final Presentation 25 Group Summative Week 12 1. 2. 3. 4. 5. 6. Final Report 50 Group Summative Week 12 1. 2. 3. 5. 6. Total 100
This assessment breakdown is registered as an exemption to the University's . The exemption is related to the Procedures clause(s): 1. a. i 1. a. ii 1. a. iii
Assessment Detail
No information currently available.
Submission
Key assessment deadlines:
Assessment Due Weighting Progress interview 1 Week 4 10% Progress interview 2 Week 8 15% Final project presentation Week 12 25% Final project report Friday, Week 12 50% Total 100% Course Grading
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through .
-
Student Feedback
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
-
Student Support
- Academic Integrity for Students
- Academic Support with Maths
- Academic Support with writing and study skills
- Careers Services
- Library Services for Students
- LinkedIn Learning
- Student Life Counselling Support - Personal counselling for issues affecting study
- Students with a Disability - Alternative academic arrangements
-
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangements Policy
- Academic Integrity Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs Policy
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment Policy
- Reasonable Adjustments to Learning, Teaching & Assessment for Students with a Disability Policy
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
-
Fraud Awareness
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.
The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.