C&ENVENG 7079 - Water Engineering & Design S2

North Terrace Campus - Semester 2 - 2015

Closed conduit flows: hydraulic engineering design. Elements of pipeline and network design; pipes in series; pipes in parallel; Hardy Cross method for solving pipe networks; water losses, unsteady flow and water hammer in closed conduits; method of characteristics; water hammer control devices; hydraulic machine basics and selection including pumps and turbines; water distribution system computer simulation modelling, EPANET. Design of water distribution systems. Consideration of carbon in design of water distribution systems. Open channel flow: non-uniform flow in open channels, spillway design, flow in erodible channels, unsteady flow in open channels; rapidly varied flow in open channels; level pool routing; environmental factors affecting river basins.

Open All

Course Details

Course Code	C&ENVENG 7079
Course	Water Engineering & Design S2
Coordinating Unit	School of Civil, Environmental & Mining Eng
Term	Semester 2
Level	Postgraduate Coursework
Location/s	North Terrace Campus
Units	3
Contact	Up to 3 hours per week, 4 laboratory sessions and 6-8 for the design project.
Available for Study Abroad and Exchange	N
Assessment	exam 50%, assignments/laboratories/design project 50%

Course Staff

Course Coordinator: Dr Aaron Zecchin

Course Coordinator and Lecturer: Dr Angela Marchi
Room N124, Engineering North Building, angela.marchi@adelaide.edu.au,
ph: 8313 1113. Consulting times will be provided.

Lecturer: Prof. Angus Simpson
Room N142b Engineering North Building, angus.simpson@ adelaide.edu.au
ph: 8313 5874. Consulting times will be provided.

Lecturer: Dr. Aaron Zecchin
Room 108, Engineering North Building, aaron.zecchin@adelaide.edu.au
ph 8313 4359. Consulting times will be provided.

Tutors and demonstrators will be available for assistance during the tutorials, laboratory practical sessions and the design project.

Course Timetable

The full timetable of all activities for this course can be accessed from .

Course Learning Outcomes

On successful completion of this course students will be able to:

Technical knowledge and application of knowledge skills
1. Analyse and design water distribution systems, including pipe related problems by computing flow, velocities, headlosses, pressures, hydraulic gradelines of various water distribution system configurations: parallel and series pipes, 3-reservoir problem, looped networks (Hardy Cross analysis and computer simulation by EPANET) and pump systems by finding the pump operating point, modifying pump speed, pump impeller diameter and system curve to achieve the desired pump operating point; selecting the most appropriate pump (or combination of pumps) in a system; and defining the pump controls. Students will be also able to represent water losses and choose the most effective intervention to reduce them.
2. Decide if the system has to be protected against water hammer; compute pressure variations due to water hammer (method of characteristics analysis, reservoir boundary condition, valve boundary condition); select a water hammer suppression device;
3. Analyse rapidly and gradually varying open channel flow, including unsteady flows, and flows in erodible beds, spillway design and level pool routing.
4. Use computers and information technology effectively in (1) simulating of water distribution systems and (2) preparing reports to present results of designs.
5. Recognise limitations of engineering approaches and systems and to deal with uncertainty (e.g. in the estimation of peak day water demands).

Thinking skills
6. Develop competence in critical and independent thinking in identifying, formulating and solving water related problems.
7. Develop the ability to effectively synthesize information and ideas in relation to issues relating to water system design – assumptions, design criteria, reliability.

Personal skills and attitudes
8. Communicate effectively with others in small groups working on assignments and projects – written, oral and listening skills.
9. Manage effectively the allocation of time in performing tasks by meeting the deadlines for submission of assignments and projects.
10. Develop life long learning skills.

University Graduate Attributes

This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:

University Graduate Attribute	Course Learning Outcome(s)
Knowledge and understanding of the content and techniques of a chosen discipline at advanced levels that are internationally recognised.	1, 2, 3, 4, 5
The ability to locate, analyse, evaluate and synthesise information from a wide variety of sources in a planned and timely manner.	5, 6, 7
An ability to apply effective, creative and innovative solutions, both independently and cooperatively, to current and future problems.	6
Skills of a high order in interpersonal understanding, teamwork and communication.	8, 9
A proficiency in the appropriate use of contemporary technologies.	4
A commitment to continuous learning and the capacity to maintain intellectual curiosity throughout life.	10

Learning Resources

Required Resources

Lecture notes from a book prepared by Professor Simpson for the pipeline network and water hammer component of the course. The lecture notes are available on sale from Image and Copy, Level 1, Hughes Building or can be downloaded from myUni.

Flow in Open Channels by K. Subramanya (3rd edition). This is essential for the open channel component of the course.

Recommended Resources

Chaudhry: Open Channel Flow. Prentice Hall, 1993.
Chaudhry: Applied Hydraulic Transients
Chow: Open-channel hydraulics.
Crowe, Elger and Roberson: Engineering Fluid Mechanics. 9th Edition
Henderson: Open channel flow, 1966
Jain: Open-Channel Flow Wiley, 2001
Rouse and Ince: History of Hydraulics
Streeter and Wylie: Fluid Mechanics. SI Version
Wylie and Streeter: Fluid transients

Online Learning

Additional resources such as lecture slides, assignments and the design project will be provided on MyUni. Students are expected to regularly check on MyUni for course announcements and utilise the Discussion Board for additional contact.

Learning & Teaching Modes

This course uses a number of different teaching and learning approaches including:
· Lectures (two 1 hr lectures weekly- except week 1)
· Tutorials (one 1 hr tutorial, usually fortnightly)
· Practicals (one 2 hr practicals each three weeks)
· Design sessions (four 2 hr design sessions in weeks 6-9)

Workload

The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

There will be 25 lectures and 5 tutorials, with an assignment associated with each tutorial (five in total). A total of 8 hours of practicals throughout the semester will be undertaken in groups of 6 with individual reports due 2 weeks after the practical session. The design project, in weeks 6-9, will be undertaken within groups of 4.

Learning Activities Summary

The tutorials will be on Tuesdays and Thursdays of weeks 2, 4, 6, 8 and 11. The class will be split into 2 groups during this time, with each group assigned a different location. The lecture schedule is shown below and is subject to change.

Week	Day	Time	Topic	Lecture theatre
1	M	10am	L1: Introduction	Medical School Sth SG16
1	Tue	10am	L2: Review + Hazen-Williams	Medical School Sth SG15
1	W	10am	L3: Pipes in series, parallel, 3 reservoirs problem	Medical School Sth SG16
2	M	10am	L4: Tree network/Network equation	Medical School Sth SG16
2	Tue	10am	L5: Hardy Cross	Medical School Sth SG15
2	W	10 am	Tutorial 1: pipes in series/parallel	Medical School Sth SG16
2	Thur	12pm	Tutorial 1: pipes in series/parallel	Physics 103
3	M	10am	L6: Pump #1: Pump Types, Pump curves, Operating point	Medical School Sth SG16
3	Tue	10am	L7: Pump #2: homologous pumps/dimensionless numbers/affinity laws	Medical School Sth SG15
3	Wed	10 am	Water Losses (MASTERS ONLY)	Medical School Sth SG16
4	M	10am	L8: Pump #3: Cavitation, NPSHA/NPSHR, valves	Medical School Sth SG16
4	Tue	10am	L9: Pump #4: Pumps in parallel/series + pump controls	Medical School Sth SG15
4	W	10am	Tutorial 2: Hardy Cross	Medical School Sth SG16
4	Thur	12pm	Tutorial 2: Hardy Cross	Physics 103
5	M	10am	L10: Design #1	Medical School Sth SG16
5	Tue	10am	L11: Design #2 + EPANET	Medical School Sth SG15
6	M	10am	L12: Water Hammer #1: basics+Joukowsky	Medical School Sth SG16
6	Tue	10am	L13: Water Hammer #2: Fast /slow valve closure	Medical School Sth SG15
6	W	10am	Tutorial 3: Pumps	Medical School Sth SG16
6	Thur	12pm	Tutorial 3: Pumps	Physics 103
6	F	1pm	DESIGN SESSION #1	EM205,G22,EM108-109
7	M	10am	L14: Water Hammer #3: unsteady equations	Medical School Sth SG16
7	Tue	10am	L15: Water Hammer #4: MOC	Medical School Sth SG15
7	F	1pm	DESIGN SESSION #2	EM205,G22,EM108-109
8	M	10am	L16: Water Hammer #5: water hammer protection	Medical School Sth SG16
8	Tue	10am	L17: Open Channel #1 (Review of Open Channel Flow)	Medical School Sth SG15
8	W	10am	Tutorial 4: Water Hammer	Medical School Sth SG16
8	Thur	12pm	Tutorial 4: Water Hammer	Physics 103
8	F	1pm	DESIGN SESSION #3	EM205,G22,EM108-109
9	M	-	Public Holiday	-
9	Tue	10am	L18: Open Channel #2 (Gradually Varied Flow)	Medical School Sth SG15
9	Fri	1pm	DESIGN SESSION #4	EM205,G22,EM108-109
10	M	10am	L19: Open Channel #3 (Gradually Varied Flow)	Medical School Sth SG16
10	Tue	10am	L20: Open Channel #4 (Rapidly Varied Flow – Hydraulic Jumps)	Medical School Sth SG15
11	M	10am	L21: Open Channel #5 (Flow Measurement and Spillways)	Medical School Sth SG16
11	Tue	10am	L22: Open Channel #6 (Unsteady Flow - Level Pool Routing)	Medical School Sth SG15
11	W	10am	Tutorial 5: Open Channels	Medical School Sth SG16
11	Thur	12pm	Tutorial 5: Open Channels	Physics 103
12	M	10am	L23: Environmental factors	Medical School Sth SG16
12	Tue	10am	L24: Review	Medical School Sth SG15

The University's policy on Assessment for Coursework Programs is based on the following four principles:

Assessment must encourage and reinforce learning.
Assessment must enable robust and fair judgements about student performance.
Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
Assessment must maintain academic standards.

Assessment Summary

Assessment Task	Due Date	Approximate Weighting	Learning Objectives
Assignments	Second Friday after tutorial	10%	1-6, 9, 10
Laboratory	2 weeks after session	15%	5, 9
Design Project	1pm Friday, Week 10	25%	4, 5, 7, 8-10
Exam	During Exam Period	50%	1-7

Assessment Related Requirements

Students must obtain at least 40% in the final examination to be eligible to pass the course. Please be aware that you may be eligible for an academic supplementary exam if you fail to meet this requirement. If a student sits a supplementary exam on academic grounds, the final mark will be based on that examination only. Failure to demonstrate a necessary level of knowledge and understanding of the course material in the supplementary exam will result in a fail grade

It is mandatory to attend the schedules laboratory sessions; students who miss a session due to illness should provide a medical certificate. Students MUST both attend all laboratory sessions and obtain at least an average of 50% for the laboratory reports to be eligible to pass the course. In case this requirement is not met, the student will be given the possibility to resubmit the insufficient reports: however, a maximum mark equal to 50% will be given for the laboratory component.
Applications for exemptions from portions of the course that a student has passed in 2010-2013 only (not 2008 or prior) must be applied for by the end of week 2 (5:00pm Friday). Exemptions WILL ONLY be given for Laboratories and/or Designs. A mark of 50% will be given as credit for the portions that exemptions are granted for.

Assessment Detail

Assignments:
For each assignment a list of questions will be set. The students will be given an assignment every two weeks, and approximately two weeks to complete it. This will enable the student to access assistance within a tutorial session for each assignment.

Laboratories:
4x2 hours of practicals will be undertaken in groups of 6 with individual reports to be submitted 2 weeks after the practical session. Students are expected to read the practical handout and a page hand written summary of the practical is required to be submitted to the demonstrators at the beginning of each session. A 20% deduction of the final report mark will be deducted if no summary is given.

Design Project:
The design project will consist of group work during weeks 6 to 10, with formal design sessions held in weeks 6, 7, 8 & 9. Peer assessment will be conducted. Further details will be provided before the project commences.

Examination:
A 3 hour examination will be held at the end of Semester II. It will be a restricted open book exam. - This is explicitly restricted to the textbook by Elger (or the previous edition by Crowe), the textbook by Subramanya and Prof Simpson’s book notes. NO OTHER BOOKS OR MATERIAL may be brought into the examination. Information relating to Fluid Properties will be permitted.
- The lecture slides, design, laboratory practical write-ups, tutorial solutions and worked problems including solutions to old examination problems, may NOT BE brought into the examination. A check of the material brought in by each student will be made at the beginning of the examination.
- Use of dictionaries is permitted.
Supplementary exams awarded on academic grounds will only be given in extraordinary circumstances. If a student sits for a supplementary exam on academic grounds, the final mark will be based on the examination only.

Submission

Assignments, laboratory practicals and the project report have to be submitted via the boxes outside the School Office. The penalty for late submissions of assignments, lab reports and design project is 10% per day or part thereof of being late. A late submission will only be allowed when a deferred deadline has been approved by the course coordinator prior to the due date because of medical or extenuating circumstances. Any requests for extensions must be communicated by email.

Course Grading

Grades for your performance in this course will be awarded in accordance with the following scheme:

M10 (Coursework Mark Scheme)
Grade	Mark	Description
FNS		Fail No Submission
F	1-49	Fail
P	50-64	Pass
C	65-74	Credit
D	75-84	Distinction
HD	85-100	High Distinction
CN		Continuing
NFE		No Formal Examination
RP		Result Pending

Further details of the grades/results can be obtained from Examinations.

Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.

Final results for this course will be made available through .

Student Feedback

The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.

SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
Student Support
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
Fraud Awareness

Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.

The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.

Authorised by:	Deputy Vice-Chancellor and Vice-President (Academic)
Maintained by:	Course Outlines Administrator

成人大片