成人大片

CHEM ENG 7048 - Biofuels, Biomass and Wastes

North Terrace Campus - Semester 2 - 2020

Fundamental concepts in understanding biofuels/bioenergy systems; renewable feedstocks, their production, availability and attributes for biofuel/bioenergy production; types of biomass derived fuels and energy; thermochemical conversion of biomass to heat, power and fuel; biochemical conversion of biomass to fuel; environmental aspects of biofuel production; economics and life-cycle analysis of biofuel; value adding of biofuel residues; case studies on biofuel production.

  • General Course Information
    Course Details
    Course Code CHEM ENG 7048
    Course Biofuels, Biomass and Wastes
    Coordinating Unit School of Chemical Eng and Advanced Materials(Ina)
    Term Semester 2
    Level Postgraduate Coursework
    Location/s North Terrace Campus
    Units 3
    Contact Up to 4 hours per week
    Available for Study Abroad and Exchange Y
    Assessment Assignments, project and final examination
    Course Staff

    Course Coordinator: Associate Professor Philip Kwong

    Course Timetable

    The full timetable of all activities for this course can be accessed from .

  • Learning Outcomes
    Course Learning Outcomes
    On successful completion of this course students will be able to:

     
    1 Describe the nature and principle of different biomass energy extraction systems and know how to choose the suitable biomass fuels for different bio-energy applications;
    2 Address the desirable features of these biomass energy sources and their advantages over traditional fuels such as coal and oil; and
    3 Identify their limited scope in terms of suitable sites, dependence on the elements, capital costs, and cost effectiveness compared with traditional sources.

     
    The above course learning outcomes are aligned with the Engineers Australia .
    The course is designed to develop the following Elements of Competency: 1.1   1.2   1.3   1.4   1.5   1.6   2.1   2.2   2.3   3.2   3.3   

    University Graduate Attributes

    This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:

    University Graduate Attribute Course Learning Outcome(s)
    Deep discipline knowledge
    • informed and infused by cutting edge research, scaffolded throughout their program of studies
    • acquired from personal interaction with research active educators, from year 1
    • accredited or validated against national or international standards (for relevant programs)
    1-3
    Critical thinking and problem solving
    • steeped in research methods and rigor
    • based on empirical evidence and the scientific approach to knowledge development
    • demonstrated through appropriate and relevant assessment
    1-3
    Teamwork and communication skills
    • developed from, with, and via the SGDE
    • honed through assessment and practice throughout the program of studies
    • encouraged and valued in all aspects of learning
    3
  • Learning Resources
    Recommended Resources
    Demirbas, A., 2009, Biofuels securing the planet’s future energy needs, Energy Conversion and Management 50, 2239-2249.

    Demirbas, A., 2001, Biomass resource facilities and biomass conversion processing for fuels and chemicals, Energy Conversion and Management 42, 1357-1378.

    Sami, M., Annamalai, K., Wooldridge, M., 2001, Co-firing of coal and biomass fuel blends, Progress in Energy and Combustion Science 27,171-214.

    Demirbas, A., 2004, Combustion characteristics of different biomass fuels, Progress of Energy and Combustion Science 30, 219–230.

    Nussbaumer, T., 2003, Combustion and co-combustion of biomass: Fundamentals, technologies, and primary measures for emission reduction, Energy and fuels 17, 1510- 1512.

    de Nevers, N., Air pollution control engineering (2nd edition), McGraw-Hill.

    Meier D. and Faix, O., 1999, State of the art of applied fast pyrolysis of lignocellulosic materials- a review, Bioresource Technology, 68, 71-77.

    Ni, M., Leung, D.Y.C., Leung, M.K.H. and Sumathy, K., 2006, An overview of hydrogen production from biomass, Fuel Processing Technology 87, 461-472.

    Kirubakaran, V., Sivaramakrishnan, R., Nalini, R., Sekar, T., Premalatha, M. and Subramanian, P., 2009, A review on gasification of biomass, Renewable & Sustainable Energy Reviews 13, 179-186.

    Chynoweth D.P., Owens, J.M., and Legrand, R., 2001, Renewable methane from anaerobic digestion of biomass, Renewable Energy 22, 1-8.

    Gunaseelan, V. N., 1997, Anaerobic digestion of biomass for methane production: A review, Biomass and Bioenergy 13, 83-114.

    Cheng, H. and Hu, Y., 2010, Municipal solid waste (MSW) as a renewable source of energy: Current and future practices in China, Bioresource Technology 101, 3816-3824.

    Pavlas, M., Touš, M., Bébar, L. and Stehlík, P., 2009, Waste to energy-  An evaluation of the environmental impact, Applied Thermal Engineering, doi:10.1016/j.applthermaleng.2009.10.019

    Demirbas, A., 2009, Political, economic and environmental impacts of biofuels: A review, Applied Energy 86, S108-S117.
    Online Learning
    A range of online resources will be provided via MyUni.
  • Learning & Teaching Activities
    Learning & Teaching Modes

    No information currently available.

    Workload

    The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

    Activity Contact Hours Workload Hours
    Lectures 20 48
    Tutorials 11 18
    Computer Labs 0 0
    Project 5 31
    Examination 0 8
    TOTAL 36 105
    Learning Activities Summary
    Topic 1: Introduction – Current situation and overview on different energy sources

    Topic 2: Overview of biomass energy

    Topic 3: Combustion of biomass

    Topic 4: Thermochemical conversions of biomass

    Topic 5: Energy from waste

    Topic 6: Issues and opportunities with biomass energy 


  • Assessment

    The University's policy on Assessment for Coursework Programs is based on the following four principles:

    1. Assessment must encourage and reinforce learning.
    2. Assessment must enable robust and fair judgements about student performance.
    3. Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
    4. Assessment must maintain academic standards.

    Assessment Summary
    Assessment Task Weighting (%) Individual/ Group Formative/ Summative
    Due (week)*
    Hurdle criteria Learning outcomes
    Term Project 25 Group Formative week 12 1. 2. 3.
    Tutorial discussion 5 Individual   week 1 to
    week 12
    1. 2. 3.
    Assignments 20 Individual Formative weeks 3
    & 9
    1. 2. 3.
    Final examination 50 Individual Summative week 12 1. 2. 3.
    Total 100
    * The specific due date for each assessment task will be available on MyUni.
     
    This assessment breakdown is registered as an exemption to the University's . The exemption is related to the Procedures clause(s):
    Assessment Detail

    No information currently available.

    Submission

    No information currently available.

    Course Grading

    Grades for your performance in this course will be awarded in accordance with the following scheme:

    M10 (Coursework Mark Scheme)
    Grade Mark Description
    FNS   Fail No Submission
    F 1-49 Fail
    P 50-64 Pass
    C 65-74 Credit
    D 75-84 Distinction
    HD 85-100 High Distinction
    CN   Continuing
    NFE   No Formal Examination
    RP   Result Pending

    Further details of the grades/results can be obtained from Examinations.

    Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.

    Final results for this course will be made available through .

  • Student Feedback

    The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.

    SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.

  • Student Support
  • Policies & Guidelines
  • Fraud Awareness

    Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.

The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.