CHEM ENG 2019 - Introduction to Minerals Processing
North Terrace Campus - Semester 2 - 2020
-
General Course Information
Course Details
Course Code CHEM ENG 2019 Course Introduction to Minerals Processing Coordinating Unit School of Chemical Eng and Advanced Materials(Ina) Term Semester 2 Level Undergraduate Location/s North Terrace Campus Units 3 Contact Up to 4 hours per week Available for Study Abroad and Exchange Y Assessment Tutorials/assignments, final examination Course Staff
Course Coordinator: Dr Cristiana Ciobanu
Course Timetable
The full timetable of all activities for this course can be accessed from .
-
Learning Outcomes
Course Learning Outcomes
On successful completion of this course students will be able to:
1 Explain the principles governing a range of processes applied in the minerals industry; 2 Describe typical unit processes and flow-sheets for production of a number of metals; 3 Apply basic engineering principles to the design of minerals processes; and 4 Produce conceptual designs for simple extraction processes. 5 Work proficiently and effectively in small teams.
The above course learning outcomes are aligned with the Engineers Australia .
The course is designed to develop the following Elements of Competency: 1.1 1.3 1.4 1.5 1.6 2.1 2.3 3.1 3.2 3.3 3.4 3.6
University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Deep discipline knowledge
- informed and infused by cutting edge research, scaffolded throughout their program of studies
- acquired from personal interaction with research active educators, from year 1
- accredited or validated against national or international standards (for relevant programs)
1, 2 Critical thinking and problem solving
- steeped in research methods and rigor
- based on empirical evidence and the scientific approach to knowledge development
- demonstrated through appropriate and relevant assessment
3, 4 Teamwork and communication skills
- developed from, with, and via the SGDE
- honed through assessment and practice throughout the program of studies
- encouraged and valued in all aspects of learning
5 -
Learning Resources
Recommended Resources
Reference Books
B. Wills and T. Napier-Munn, Wills' Mineral Processing Technology, 7th Edition, Butterworth-Heinemann,
2005
P. Mullinger and B Jenkins, Industrial Furnaces, 1st Edition, Butterworth-Heinemann,
2008.
A. Burkin, Chemical Hydrometallurgy: Theory and Principles, Imperial College Press, 2001.
-
Learning & Teaching Activities
Learning & Teaching Modes
This course uses a number of different teaching and learning approaches including:
- Lectures
- Problem solving tutorials
- Final examination
Workload
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
Activity
Contact hours
Workload hours
Lectures
33
66
Tutorials
12
24
TOTALS
45
90
Learning Activities Summary
1. Introduction
An overview of the minerals processing industry and its importance to the Australian and world economy. Historical development of minerals processing from pre-history to the current time. Basic flowsheets.2. Ore handling
Crushing, ore transport, stockpiling and pre-blending3. Comminution
Crushing, grinding, breakage of materials, crushing and grinding laws & particle size analysis. Grinding machinery, milling circuits, sizing, screening and classification, hydro-cyclones, modelling of grinding circuits. Slurry properties, pumping, and transport.4. Separation and Concentration
Introduction to mass balances and metallurgical accounting calculations. Separation and concentration techniques. Sizing and sorting. Screening and classification. Gravity separation. Dense medium separation. Magnetic and electrical separation. Dewatering. Froth flotation. Practical processes coal washing, minerals sands, iron ore and non ferrous ore concentration. Recovery economics.5. Pyro-processing
Introduction to combustion processes, basic combustion chemistry and calculations, heat transfer and concept of “available heat” and its influence on furnace efficiency. Introduction to mass and energy balances, practical furnace systems including an overview of pyro-metallurgy in Australian minerals processing. Non-metallic mineral processing, rotary kiln processes, ensuring safe operation of furnace processes.6. Hydrometallurgy
Principles of electro-chemistry, the electrochemical series, principles of corrosion processes and leaching, solvent extraction & chemistry, pH-Eh, solution separation, purification. Practical hydrometallurgy processes, alumina, gold copper, nickel, uranium. Safety issues in hydrometallurgical processes.7. Electrometallurgy
The basic principles of an electrolytic cell, the importance of the electro-chemical series in determining energy consumption of electro metallurgical processes, aqueous and molten salt electrolytes, principles of the design of electrochemical reactors, energy consumption, current efficiency, practical electro-refining and electro-winning processes8. Process Instrumentation and Control
Need for control systems, basic measurement techniques for level, flow, temperature, etc. Measurement errors, actuators, valves, etc.
9. Process Safety
Modern process hazard identification techniques, risk analysis, fatal accident rate & ALARP, hazard analysis and protective systems, case studies. -
Assessment
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Summary
* The specific due date for each assessment task will be available on MyUni.Assessment Task Weighting (%) Individual/ Group Formative/ Summative Due (week)* Hurdle criteria Learning outcomes Assignment 1 - Mineralogy 6 Group* Summative Week 4 1. 5. Assignment 2 - Grinding and milling 6 Group* Summative Week 6 1. 2. 3. Assignmnet 3 - Separation and concentration 6 Group* Summative Week 8 1. 2. 3. 5. Assignment 4 - Pyrometalurgical and hydrometalurgical processing 6 Group* Summative Week 10 1. 2. 3. 4. 5. Assignment 5 - Hydro/electrometallurgy and Process Control 6 Group* Summative Week 12 1. 2. 3. 4. 5. Exam 70 Individual Summative 1. 2. 3. 4. 5. * can be individual if desired by student Total 100
This assessment breakdown complies with the University's Assessment for Coursework Programs Policy.
Assessment Detail
No information currently available.
Submission
No information currently available.
Course Grading
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through .
-
Student Feedback
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
-
Student Support
- Academic Integrity for Students
- Academic Support with Maths
- Academic Support with writing and study skills
- Careers Services
- Library Services for Students
- LinkedIn Learning
- Student Life Counselling Support - Personal counselling for issues affecting study
- Students with a Disability - Alternative academic arrangements
-
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangements Policy
- Academic Integrity Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs Policy
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment Policy
- Reasonable Adjustments to Learning, Teaching & Assessment for Students with a Disability Policy
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
-
Fraud Awareness
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.
The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.
