成人大片

MECH ENG 7070 - Heat Transfer & Thermodynamics

North Terrace Campus - Semester 1 - 2014

Heat transfer modes: conduction, convection and radiation. Heat exchanger design and optimization, numerical methods, and mass transfer. Vapour power cycles; refrigeration cycles; non-reacting mixtures; psychrometry; combustion.

  • General Course Information
    Course Details
    Course Code MECH ENG 7070
    Course Heat Transfer & Thermodynamics
    Coordinating Unit School of Mechanical Engineering
    Term Semester 1
    Level Postgraduate Coursework
    Location/s North Terrace Campus
    Units 3
    Contact Up to 4 hours per week
    Assessment Lab Class 10%, Assignments 20%, Final Exam 70%
    Course Staff

    Course Coordinator: Dr Eric Hu

    Course Timetable

    The full timetable of all activities for this course can be accessed from .

  • Learning Outcomes
    Course Learning Outcomes
    1 have a strong understanding of the fundamental laws and principles of thermodynamics and heat transfer;
    2 be able to apply these principles to real thermo-fluids systems;
    3 be familiar with current practice in the area of thermo-fluids;
    4 appreciate environmental issues associated with energy conservation, efficiency, pollution control, etc.
    University Graduate Attributes

    This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:

    University Graduate Attribute Course Learning Outcome(s)
    Knowledge and understanding of the content and techniques of a chosen discipline at advanced levels that are internationally recognised. 1-4
    The ability to locate, analyse, evaluate and synthesise information from a wide variety of sources in a planned and timely manner. 1-4
    An ability to apply effective, creative and innovative solutions, both independently and cooperatively, to current and future problems. 1-4
    Skills of a high order in interpersonal understanding, teamwork and communication. 1-4
    A proficiency in the appropriate use of contemporary technologies. 1-4
    A commitment to continuous learning and the capacity to maintain intellectual curiosity throughout life. 1-4
    A commitment to the highest standards of professional endeavour and the ability to take a leadership role in the community. 1-4
    An awareness of ethical, social and cultural issues within a global context and their importance in the exercise of professional skills and responsibilities. 1
  • Learning Resources
    Required Resources

    Course notes – these are essential and required for both Heat Transfer and Thermodynamics.

    • Bergman, Lavine, Incropera and Dewitt., Fundamentals of Heat and Mass Transfer, 7th Edition, John Wiley & Sons, 2011.
    • Moran and Shapiro, Fundamentals of Engineering Dynamics, 6th Edition, John Wiley & Sons, 2008
    Recommended Resources
    The Barr Smith Library has many textbooks, which are concerned with Heat Transfer and Thermodynamics. Students are encouraged to consult these books to enrich their knowledge in both topics.
  • Learning & Teaching Activities
    Learning & Teaching Modes
    Lectures supported by problem-solving tutorials developing material covered in lectures.
    Workload

    The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

     The required time commitment is 32 hours attendance at lectures, 16 hours tutorials, 6 hours practicals, 48 hours of revising course material and 50 hours completing assignments, reports and preparing for exam.
    Learning Activities Summary

    Heat Transfer

    Lecture 1: Introduction to Heat Transfer
    Lecture 2: Conduction – An Introduction
    Lecture 3: Conduction – Steady-State 1-D
    Lecture 4: Conduction – Steady-State, Multidimensional
    Lecture 5: Conduction – Transient/Unsteady Conduction
    Lecture 6: Conduction – Numerical Methods
    Lecture 7: Convection – An Introduction
    Lecture 8: Convection – External Convection
    Lecture 9: Convection – Internal Convection
    Lecture 10: Convection - Free Convection
    Lecture 11: Radiation – An Introduction
    Lecture 12: Radiation – Exchange between Surfaces
    Lecture 13: Heat Exchangers – An Introduction
    Lecture 14: Heat Exchangers – Design and Selection
    Lecture 15: Mass Transfer – Introduction
    Lecture 16: Mass Transfer - Discontinuous Interfaces

    Thermodynamics

    Lecture 1-2: Thermodynamics I Revision and Overview
    Lecture 3-6: Vapour Power Systems
    Lecture 7-9: Gas Power Systems
    Lecture 10-12: Refrigeration & Heat Pumps
    Lecture 13-14: Ideal gas Mixtures & Psychrometrics
    Lecture 15-16: Reacting Mixtures and Combustion
    Specific Course Requirements
    NONE
  • Assessment

    The University's policy on Assessment for Coursework Programs is based on the following four principles:

    1. Assessment must encourage and reinforce learning.
    2. Assessment must enable robust and fair judgements about student performance.
    3. Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
    4. Assessment must maintain academic standards.

    Assessment Summary

    All assessment tasks are summative. There are 11 assignments, which contribute 20% of the assessment, two practicals worth a total of 10% and an open book exam worth 70%. All assignments are due by 5pm on the due date. Details of each task are tabulated below.

    Assessment task Weighting % Description Due date Learning objectives
    (See 2.1 above)
    Assignment 1 2.5 HT lectures 1-4 See MyUni 1-4
    Assignment 2 2.5 HT lectures 5-8 See MyUni 1-4
    Assignment 3 2.5 HT lectures 9-12 See MyUni 1-4
    Assignment 4 2.5 HT lectures 10-16 See MyUni 1-4
    Assignment 5 1.25 TD lectures 2-6 See MyUni 1-4
    Assignment 6 1.25 TD lectures 7-9 See MyUni 1-4
    Assignment 7 1.25 TD lectures 10-12 See MyUni 1-4
    Assignment 8 1.25 TD lectures 12-13 See MyUni 1-4
    Group Assignment 1 1.67 Power Systems See MyUni 1-4
    Group Assignment 2 1.67 Refrigeration See MyUni 1-4
    Group Assignment 3 1.67 Psychrometrics See MyUni 1-4
    BBQ Practical 5 Practical See schedule on practicals book 1-4
    Engine Performance 5 Practical See schedule on practical book 1-4
    Final Exam 70 Exam on all parts of the course Exam period 1-4
    Assessment Related Requirements
    NONE
    Assessment Detail
    Four individual assignments on Heat Transfer, Four individual assignments on Thermodynamics and Three group assignments on Thermodynamics.
    Submission
    Students will be contacted directly with clear instructions and all information will be posted on MyUni
    Course Grading

    Grades for your performance in this course will be awarded in accordance with the following scheme:

    M10 (Coursework Mark Scheme)
    Grade Mark Description
    FNS   Fail No Submission
    F 1-49 Fail
    P 50-64 Pass
    C 65-74 Credit
    D 75-84 Distinction
    HD 85-100 High Distinction
    CN   Continuing
    NFE   No Formal Examination
    RP   Result Pending

    Further details of the grades/results can be obtained from Examinations.

    Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.

    Final results for this course will be made available through .

  • Student Feedback

    The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.

    SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.

  • Student Support
  • Policies & Guidelines
  • Fraud Awareness

    Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.

The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.