成人大片

MECH ENG 7065 - Naval Ship Engineering

North Terrace Campus - Semester 2 - 2024

Building on the Introductory course by expanding on operational requirements for naval ships and the specific naval systems developed, including; propulsion train, replenishment at sea, firefighting and damage control, ship signatures, helicopter operations, magazine design, weapon system integration and topside design. Applying modern technology for naval ship construction and maintenance support.

  • General Course Information
    Course Details
    Course Code MECH ENG 7065
    Course Naval Ship Engineering
    Coordinating Unit Mechanical Engineering
    Term Semester 2
    Level Postgraduate Coursework
    Location/s North Terrace Campus
    Units 3
    Contact One week intensive
    Available for Study Abroad and Exchange Y
    Prerequisites MECH ENG 7048
    Restrictions Available only to students in the Master/Grad Dip of Marine Engineering (now called Master/Grad Dip of Maritime Engineering)
    Assessment Assignments, project, final exam
    Course Staff

    Course Coordinator: Mr Eric Fusil

    IMPORTANT - PLEASE READ

    COURSE DELIVERY MODE:
    it is a mix of weekly lectures (livestreamed and recorded but preferred face-to-face attendance if possible) and of an intensive period around mid-semester.

    For REMOTE LEARNING STUDENTS:
    Depending on your time zone (Canada/USA - Europe), there will be specific timeslots to catch up live with the course coordinator.

    ASSIGNMENTS:
    - formative assignments ( not counting towards final grade): there will be several formative quizzes for students to check their learning
    - summative assessments:
    - a Quiz,
    - The reverse engineering of an existing ship from an analytical perspective,
    - An engineering analysis on an existing ship with proposed modifications on key platform and combat systems for 21st-century challenges readiness,
    - A project to design a navy ship: this course addresses the final systems engineering part leading to the student’s proposed solution to a set of requirements (actually addressed in MECH ENG 7048).

    Seminars are organized with Industry and a students’ seminar concludes the course with project presentations.


    Course Timetable

    The full timetable of all activities for this course can be accessed from .

  • Learning Outcomes
    Course Learning Outcomes
    On successful completion of this course students will be able to:
    1 Identify current classes of Ships (OPV, Frigates, Destroyers, LHD) and design philosophies in depth.
    2 Explain the design to build approach in the context of ships and their systems.
    3 Describe the different systems (platform or combat) in a navy ship.
    4 Demonstrate how to build a ship from a new class or an evolution of an existing one.
    5 Apply the design process to carry out the final part of a feasibility phase on a concept navy ship project.
    6 Check the design feasibility of ships and their seaworthiness.
    7 Create a navy ship concept design from top-level requirements.

     
    The above course learning outcomes are aligned with the Engineers Australia . The course develops the following EA Elements of Competency to levels of introductory (A), intermediate (B), advanced (C):  
     
    1.11.21.31.41.51.62.12.22.32.43.13.23.33.43.53.6
    University Graduate Attributes

    This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:

    University Graduate Attribute Course Learning Outcome(s)

    Attribute 1: Deep discipline knowledge and intellectual breadth

    Graduates have comprehensive knowledge and understanding of their subject area, the ability to engage with different traditions of thought, and the ability to apply their knowledge in practice including in multi-disciplinary or multi-professional contexts.

    1 芒聙聯 2 芒聙聯 3 芒聙聯 6 - 7

    Attribute 2: Creative and critical thinking, and problem solving

    Graduates are effective problems-solvers, able to apply critical, creative and evidence-based thinking to conceive innovative responses to future challenges.

    2 芒聙聯 3 芒聙聯 4 芒聙聯 5 - 7

    Attribute 3: Teamwork and communication skills

    Graduates convey ideas and information effectively to a range of audiences for a variety of purposes and contribute in a positive and collaborative manner to achieving common goals.

    1 芒聙聯 2 芒聙聯 4 芒聙聯 6 - 7

    Attribute 4: Professionalism and leadership readiness

    Graduates engage in professional behaviour and have the potential to be entrepreneurial and take leadership roles in their chosen occupations or careers and communities.

    2 芒聙聯 4 芒聙聯 6 - 7

    Attribute 5: Intercultural and ethical competency

    Graduates are responsible and effective global citizens whose personal values and practices are consistent with their roles as responsible members of society.

    1

    Attribute 6: Australian Aboriginal and Torres Strait Islander cultural competency

    Graduates have an understanding of, and respect for, Australian Aboriginal and Torres Strait Islander values, culture and knowledge.

    NA

    Attribute 7: Digital capabilities

    Graduates are well prepared for living, learning and working in a digital society.

    2 芒聙聯 3 芒聙聯 5 - 7

    Attribute 8: Self-awareness and emotional intelligence

    Graduates are self-aware and reflective; they are flexible and resilient and have the capacity to accept and give constructive feedback; they act with integrity and take responsibility for their actions.

    2 芒聙聯 6 - 7
  • Learning Resources
    Required Resources

    Course notes – these are essential and required.

    Text book: Basic Ship Theory Volumes 1 & 2 by Rawson and Tupper, Publisher Butterworth – Heinemann.

    Recommended Resources

    See list provided with the course notes

  • Learning & Teaching Activities
    Learning & Teaching Modes

    Background reading and videos help the students project themselves into the world of submariners, mostly within Defence.

    Weekly lectures provide the students with background knowledge but also a forum in which they are engaged.
    Lecturers are proposing materials on which the students are asked about their analysis facing a specific engineering problem within the submarine context.
    These lectures feature video and graphics to best illustrate the challenge.

    An intensive part of the course is run mid-semester with Industry lecturers bringing their knowledge and personal stories.
    As a result of this, the course is a mix of theory (academic) and industry experience with real-life situations that the engineers had to face.

    Students have some formative quizzes leading them from the design principles to actual implementation on systems and technological choices, whilst ensuring balance of the overall ship.

    That knowledge is then used by the students on a number of projects:
    - The reverse engineering of an existing ship from an analytical perspective,
    - An engineering analysis on an existing ship with proposed modifications on key platform and combat systems for 21st century challenges readiness,
    - A project to design a navy ship: this course addresses the final systems engineering part leading to the student’s proposed solution to a set of requirements (actually addressed in MECH ENG 7048).

    Seminars are organized with Industry and a students’ seminar concludes the course with project presentations.

    Workload

    The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

    The expected workload of 12 hours per week comprises:
    - Background reading,
    - Lecture attendance,
    - Project,
    - Peer reviews

    The expected workload of 12 hours per week comprises:
    - Background reading,
    - Lecture attendance,
    - Project,
    - Peer reviews

    Structured Learning: Contact sessions (In Semester) No. of sessions Duration
    (hours)
    Total
    Hours
    Academic Lectures 13 1.5 19.5
    Tutorials 1 2 2
    Practicals 5 2 10
    Industry Lectures 19 0.85 16.15
    47.65
    Assessment Tasks
    (In Semester)
    % Assessment Weighting No. of
    Tasks
    Preparation
    time (hours)
    Total
    Hours
    Summative tutorials   3 1 3
    Summative tests 10 1 1 1
    Project design study 30 2 27 54
    Literature review 20 2 14 28
    Examination 40 1 3 3
    Portfolio       0
    Total Assessment Weighting % 100 89
    Non-Contact Study /
    Preparation (In Semester)
    No. of
    Sessions
    Study/Prep Time (hrs) Total
    Hours
    Weekly reading / Other study  13 1 6.5
    Tutorial preparation     0
    Practical preparation     0
    Test preparation     0
    Exam preparation 1 7 7
    Other/s (please specify):     0
    13.5
    Workload per semester (hrs) 150.15
    *Workload per week (hrs) 11.55
    Learning Activities Summary

    This Course builds on the broad overview provided in the Introductory Course, providing more depth on design integration aspects and those whole ship design requirements such as shock, noise, vibration, signature management.

    A significant aspect of the Course is to demonstrate design integration by applying the knowledge gained to a practical case study.

    SIGNATURE MANAGEMENT

    • Radar Cross Section (RCS)
    • Infra red signature – exhaust gas emissions
    • Magnetic signature
    • Underwater noise signature

    SHOCK

    • Underwater shock event
    • Shock response Spectra (SRS)
    • Equipment categories
    • Equipment location
    • Shock standards
    • Shock testing
    • Shock analysis
    • Shock mounting
    • Shock design considerations

    NOISE AND VIBRATION

    • Compartment noise
    • Equipment noise
    • Structure borne noise
    • Noise level standards
    • Ship vibration
    • Equipment vibration
    • Torsional vibrations
    • Vibration standards
    • Vibration testing

    DESIGN INTEGRATION

    • Requirements Management
    • Impact Statements
    • Interface Management
    • Safety Management
    • Design Engineering
    • Integrated Logistic Support
    • Test & Evaluation

    HUMAN FACTORS

    • Operational performance
    • Perception
    • Operational environment
    • Human Machine Interface

    SUBMARINE THREATS

    • Case Studies

    PLATFORM CONTROL SYSTEMS

    • Design layouts
    • Conventions
    • Standards

    SAFETY CRITICAL SYSTEMS

    • Key Hazards
    • Safety Controls

    DESIGN FOR SUPPORTABILITY

    • Integrated Logistic Support
    • Condition Based Monitoring
    • Obsolescence
    • In-Service Tolerances

    MECHANICAL SYSTEMS

    • Fuel handling and storage system
    • Hydraulic system
    • Cooling system
    • HVAC systems
    • Compressed air systems

    PROJECT (20%)

    The Project will involve the integration of sub-components into modules and modules into a naval platform. This Project will reflect the reality of system integration and it will be structured in a manner to assess students on an individual and team basis. The Project will form a significant element of the Course requiring students to draw on previous course material and researching allocated aspects of the design.

    Specific Course Requirements

    NONE

  • Assessment

    The University's policy on Assessment for Coursework Programs is based on the following four principles:

    1. Assessment must encourage and reinforce learning.
    2. Assessment must enable robust and fair judgements about student performance.
    3. Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
    4. Assessment must maintain academic standards.

    Assessment Summary
    Assessment Task Task Type Due (week)* Weighting Learning Outcome
    Essay 1 Summative TBD 10% 1, 2, 3, 5, 6
    Essay 2 Summative TBD 10% 2, 6
    Quizzes x 4 Formative & Summative TBD 10% 1 - 6
    Project Report Summative TBD 20% 1 - 7
    Project Presentation Summative TBD 10% 1 - 7
    Exam Summative Exam period 40% 1 - 7
    * The specific due date for each assessment task will be available on MyUni.
    Assessment Detail
    • Essay 1 will address the reverse engineering of the Type 26 from BAE
    • Essay 2 will ask the student to propose a set of requirements and design options to future proof the Arafura Class OPV (TBC) as part of a midlife upgrade.
    • Quizzes 1 to 3 help the student understand the design options in various navy ship systems worldwide.
    • Quiz 4 is assessing the students knowledge acquisition
    • The Project report synthetise the students work on the design for the concept design of their choice, initiated in MECH ENG 7048.
    • The presentation of that project is performed during a seminar.
    • The final exam is assessing how well the students have assimilated knowledge and skills in navy ships engineering understanding.
    Submission

    No information currently available.

    Course Grading

    Grades for your performance in this course will be awarded in accordance with the following scheme:

    M10 (Coursework Mark Scheme)
    Grade Mark Description
    FNS   Fail No Submission
    F 1-49 Fail
    P 50-64 Pass
    C 65-74 Credit
    D 75-84 Distinction
    HD 85-100 High Distinction
    CN   Continuing
    NFE   No Formal Examination
    RP   Result Pending

    Further details of the grades/results can be obtained from Examinations.

    Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.

    Final results for this course will be made available through .

  • Student Feedback

    The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.

    SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.

  • Student Support
  • Policies & Guidelines
  • Fraud Awareness

    Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.

The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.