CHEM ENG 2018 - Process Fluid Mechanics
North Terrace Campus - Semester 1 - 2019
-
General Course Information
Course Details
Course Code CHEM ENG 2018 Course Process Fluid Mechanics Coordinating Unit School of Chemical Eng and Advanced Materials(Ina) Term Semester 1 Level Undergraduate Location/s North Terrace Campus Units 3 Contact Up to 4 hours per week Available for Study Abroad and Exchange Y Assumed Knowledge MATHS 1012, CHEM ENG 1007 Assessment tutorials, mid-semester test, final examination Course Staff
Course Coordinator: Dr Dzuy Nguyen
Course Timetable
The full timetable of all activities for this course can be accessed from .
-
Learning Outcomes
Course Learning Outcomes
On successful completion of this course students will be able to:
1 Explain the basic principles of static and fluid systems; 2 Perform a basic analysis of static and fluid systems; 3 Devise simple solutions to a range of problems in basic fluid flow; 4 Work proficiently and effectively in small teams; 5 Analyse problems using methodical and clearly demonstrated worked solutions; 6 Use appropriate modelling tools to design pipelines and equipment; 7 Complete basic design calculations of fluid engineering systems; and 8 Explain the principles that are in operation in a range of fluid motive and flow measuring devices.
The above course learning outcomes are aligned with the Engineers Australia .
The course is designed to develop the following Elements of Competency: 1.1 1.2 1.3 1.4 1.5 2.1 2.2 2.3 3.1 3.3 3.4 3.5 3.6
University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Deep discipline knowledge
- informed and infused by cutting edge research, scaffolded throughout their program of studies
- acquired from personal interaction with research active educators, from year 1
- accredited or validated against national or international standards (for relevant programs)
1,8 Critical thinking and problem solving
- steeped in research methods and rigor
- based on empirical evidence and the scientific approach to knowledge development
- demonstrated through appropriate and relevant assessment
2,3,5,6,7 Teamwork and communication skills
- developed from, with, and via the SGDE
- honed through assessment and practice throughout the program of studies
- encouraged and valued in all aspects of learning
4 -
Learning Resources
Recommended Resources
Textbook
Munson BR, Rothmayer AP, Okiishi TH, Huebsch WW (2009) Fundamentals of Fluid Mechanics, 7th Edition, John Wiley and Sons.
Reference Books
Holland FA, Bragg R 1995, Fluid Flow for Chemical Engineers, 2nd Edition, Edward Arnold.
Darby R 2001, Chemical Engineering Fluid Mechanics, Marcel Dekker.
Gerhart PM, Gross RJ, Hochstein JI 1992, Fundamentals of Fluid Mechanics, 2nd Edition, Addison-Wesley.
Online Learning
A range of online resources will be provided via MyUni. -
Learning & Teaching Activities
Learning & Teaching Modes
Students will be given the opportunity to demonstrate their understanding of the key concepts of the course during tutorial sessions; group activities and in a final examination.Workload
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
Activity Contact Hours Workload Hours Lectures 22 45 Tutorials 22 45 Total 44 90 Learning Activities Summary
Topic 1: Introduction to Fluids and Fluid Mechanics
Definition of a fluid; shear, strain rate and viscosity; compressible and incompressible flows; inviscid and viscous flows; steady and unsteady flow; laminar and turbulent flow.
Topic 2: Fluid Properties
Definition of quantity and property, intensive and extensive properties; density; absolute, gauge and vacuum pressures; thermal properties; compressibility and elasticity; thermal expansion; surface tension; dynamic viscosity; kinematic viscosity.
Topic 3: Fluid Statics
Pascal’s law; Archimedes principles; force on a submerged body.
Topic 4: Fluid kinematics
Flow regimes; Lagrangian and Eulerian descriptions; streamlines, streaklines and pathlines; dimensionality and directionality.
Topic 5: Conservation of Mass, Momentum and Energy
Control-volume rate-of-change equation; simplified forms; equation of continuity; energy equations;
Bernoulli’s equation; momentum equation.
Topic 6: Dimensional Analysis
Geometric, kinematic and dynamic similarity in fluid mechanics; Buckingham’s Pi Theorem; key parameters for incompressible and compressible flows.
Topic 8: Flow in pipes and conduitsRegimes of flow; developing flow; energy loss in pipes; Darcy-Weisbach equation; friction factor; Hagen-Poiseuille equation; pipe flow calculations.
Topic 9: Flow through pipe fittings
Expansions and contractions; loss coefficients; equivalent lengths.
Topic 10: Pipe networks
Multiple pipe systems; pipe networks; economic pipe diameter.
Topic 11: Flow measurement
Venturi and orifice meters; rotameters; Pitot and impact tubes.
Topic 12: Turbomachinery
Centrifugal machines; centrifugal pump selection and sizing; NPSH; similarity and scaling laws; other turbomachines. -
Assessment
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Summary
Assessment Task Weighting (%) Individual/ Group Formative/ Summative Due (week)* Hurdle criteria Learning outcomes Tutorial Assignments 30 Group Formative 3,5,9,11 1. 2. 3. 4. 5. 6. 7. 8. Test 10 Individual Summative 8 1. 2. 3. 5. Final Examination 60 Individual Summative 15 1. 2. 3. 5. 6. 7. 8. Total 100
This assessment breakdown complies with the University's Assessment for Coursework Programs Policy.
Assessment Detail
No information currently available.
Submission
No information currently available.
Course Grading
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through .
-
Student Feedback
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
-
Student Support
- Academic Integrity for Students
- Academic Support with Maths
- Academic Support with writing and study skills
- Careers Services
- Library Services for Students
- LinkedIn Learning
- Student Life Counselling Support - Personal counselling for issues affecting study
- Students with a Disability - Alternative academic arrangements
-
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangements Policy
- Academic Integrity Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs Policy
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment Policy
- Reasonable Adjustments to Learning, Teaching & Assessment for Students with a Disability Policy
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
-
Fraud Awareness
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.
The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.