CHEM ENG 2011 - Process Engineering Thermodynamics
North Terrace Campus - Semester 2 - 2016
The course information on this page is being finalised for 2016. Please check again before classes commence.
-
General Course Information
Course Details
Course Code CHEM ENG 2011 Course Process Engineering Thermodynamics Coordinating Unit School of Chemical Eng and Advanced Materials(Ina) Term Semester 2 Level Undergraduate Location/s North Terrace Campus Units 3 Contact Up to 4 hours per week Available for Study Abroad and Exchange Y Assumed Knowledge CHEM ENG 1007, CHEM ENG 2010 Assessment Quizzes,assignments, tests, final examination Course Staff
Course Coordinator: Associate Professor Sheng Dai
Course Timetable
The full timetable of all activities for this course can be accessed from .
-
Learning Outcomes
Course Learning Outcomes
At the completion of this course, students will be able to:
1 Compute the thermodynamic properties of pure gases and liquids, and their mixtures; 2 Determine the heat and work requirements for physical, chemical and biochemical
processes;3 Determine the equilibrium condition for chemical reactions and for the transfer of chemical
species between phases;4 Identify and formulate problems in chemical and biochemical engineering thermodynamics and
find appropriate solutions; and5 Work efficiently and productively in small teams. University Graduate Attributes
No information currently available.
-
Learning Resources
Recommended Resources
Textbook
J. M. Smith, H. C. Van Ness, and M. M. Abbott, “Introduction to Chemical
Engineering Thermodynamics”, McGraw-Hill, 7th Edition, 2005.
Reference Books
S. I. Sandler, “Chemical, Biochemical, and Engineering Thermodynamics”, Wiley, 4th Edition, 2006.
Y. A. Cengel and M. Boles, “Thermodynamics: An Engineering Approach”, Mc Graww-Hill, 7th Edition, 2011.
B. E. Poling, J. M. Prausnitz, and J. P. O’Connell, “The Properties of Gases and Liquids”, McGraw-Hill, 5th Edition, 2001.
S. Skogestad, “Chemical and Energy Process Engineering”, CRC Press, 2009.
G.F.C. Rogers and Y.R. Mayhew, “Thermodynamic and Transport Properties of Fluids - SI Units”, Blackwell, 5th Edition, 1995.
R.H. Perry & D. Green, “Perry's Chemical Engineers' Handbook”, McGraw-Hill, 7th Edition, 1997.
Online Learning
A range of online resources will be provided via MyUni.
-
Learning & Teaching Activities
Learning & Teaching Modes
No information currently available.
Workload
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
Activity Contact Hours Workload Hours Lectures 22 44 Tutorials 21 42 In Class Tests 2 10 Total 45 96 Learning Activities Summary
Topic 1: PVT Relationships and Equations of State
The law of corresponding states: PVT surfaces, critical constants, law of rectilinear diameters, virial equation,“simple” fluids, “normal” fluids. Empirical equations of state: van der Waals, Redlich-Kwong. Generalized correlations.
Topic 2: Thermodynamic Properties of Real Substances
Thermodynamic functions. Estimation of thermodynamic properties from PVT data and heat capacities. Detailed calculation of thermodynamic properties for real gases. Generalized correlation of thermodynamic properties; hypothetical ideal-gas states. Fugacities of gases, liquids and solids.Phase changes: Clausius-Clapeyron equation. Vapor pressure. Properties of 2-phase systems. Property representations. Steady-state flow: compressors and turbines, throttling devices, nozzles.
Topic 3: Power generationCarnot cycle. Rankine cycle: steam power plant; superheat, reheat and regeneration. Thermodynamics of mechanical explosions.
Topic 4: Refrigeration and Liquefaction
Carnot refrigeration cycle. Refrigerant charts and diagrams. Vapor-compression cycle: expansion valves, expansion engine. Absorption refrigeration. Liquefaction: Joule-Thomson effect, Linde process.
Topic 5: Phase Equilibrium and Multicomponent Systems
General conditions of equilibrium. Criteria of equilibrium. Composition of phases in equilibrium. Ideal-liquid solutions; Raoult’s Law; Henry’s Law; Lewis-Randall Rule. Vapor-liquid equilibrium at low and high pressures. Dew point and bubble point. Phase equilibrium constants. Excess mixture properties. Gibbs-Duhem equation; partial molar quantities. Activity coefficients: Margules and van Laar equations, thermodynamic consistency tests. Empirical and predictive liquid mixture models.
Topic 6: Chemical Reaction Equilibria
Reaction thermochemistry. Reaction equilibrium constants. Temperature dependence of equilibrium constants: van’t Hoff equation. Pressure dependence of equilibrium yields; inert gas effects. Complex equilibria: multiple reactions. Heterogeneous gas-solid, gas-liquid and liquid-solid reactions. Thermodynamics of chemical explosions.
Specific Course Requirements
HURDLE REQUIREMENTSA hurdle requirement is a minimum standard of achievement that a student must attain in order to successfully complete a course. The School of Chemical Engineering has determined that each student must achieve a minimum of 50% in the continuous assessment component of any CHEM ENG coded course. Failure to achieve 50% or greater in the continuous assessment in a course may result in an overall fail grade being awarded for the course even if you achieve 50% or more overall.Continuous assessment is where written works, tests, class participation, etc during the first 12 weeks of the semester. -
Assessment
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Summary
No information currently available.
Assessment Detail
No information currently available.
Submission
No information currently available.
Course Grading
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through .
-
Student Feedback
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
-
Student Support
- Academic Integrity for Students
- Academic Support with Maths
- Academic Support with writing and study skills
- Careers Services
- Library Services for Students
- LinkedIn Learning
- Student Life Counselling Support - Personal counselling for issues affecting study
- Students with a Disability - Alternative academic arrangements
-
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangements Policy
- Academic Integrity Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs Policy
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment Policy
- Reasonable Adjustments to Learning, Teaching & Assessment for Students with a Disability Policy
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
-
Fraud Awareness
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.
The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.
