MECH ENG 4126 - Topics in Welded Structures
North Terrace Campus - Summer - 2021
-
General Course Information
Course Details
Course Code MECH ENG 4126 Course Topics in Welded Structures Coordinating Unit School of Mechanical Engineering Term Summer Level Undergraduate Location/s North Terrace Campus Units 3 Contact Intensive - 10 days Available for Study Abroad and Exchange Y Assumed Knowledge MECH ENG 2020 Assessment Assignments, Lab experiments, Final exam Course Staff
Course Coordinator: Dr Reza Ghomashchi
Course Timetable
The full timetable of all activities for this course can be accessed from .
-
Learning Outcomes
Course Learning Outcomes
On successful completion of this course students will be able to:
1 Demonstrable knowledge of a range of welding processes, consumables and equipment and the capacity to select an appropriate welding process for a particular application ; 2 Analytical methods for understanding the variables for a range of welding process; 3 Recognise the importance of economic, environmental and occupational health and safety factors when considering the application of a welding process; 4 Explain the effects of welding on the properties of a range of materials including high strength steels; 5 Design welded structures for specific applications and environments 6 Explain the effects of welding on the residual stresses and distortion within the welded structure. 7 Outline the Australian and International Standards to which the design and manufacture of a particular structure must comply; 8 Identify the record keeping requirements for compliance to Australian and International Standards for welded joints, welded structures, welding processes, welding consumables, welding personnel and welding inspection; 9 Assess possible failure modes for the structure and their implications' 10 Apply and communicate the concepts provided to new situations and to read and understand professional articles on the subject;
The above course learning outcomes are aligned with the Engineers Australia .
The course is designed to develop the following Elements of Competency:
University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Deep discipline knowledge
- informed and infused by cutting edge research, scaffolded throughout their program of studies
- acquired from personal interaction with research active educators, from year 1
- accredited or validated against national or international standards (for relevant programs)
3 - 9 Critical thinking and problem solving
- steeped in research methods and rigor
- based on empirical evidence and the scientific approach to knowledge development
- demonstrated through appropriate and relevant assessment
3, 6, 9, 10 Teamwork and communication skills
- developed from, with, and via the SGDE
- honed through assessment and practice throughout the program of studies
- encouraged and valued in all aspects of learning
10 Career and leadership readiness
- technology savvy
- professional and, where relevant, fully accredited
- forward thinking and well informed
- tested and validated by work based experiences
1 - 10 -
Learning Resources
Required Resources
- Extensive lecture notes are provided. The purchase of text-books is not necessary for the successful completion of this course though it is encouraged for extra learning.
- Electronic copies of the lecture notes as well as any additional material provided in-class will be available through the online MyUni system.
Recommended Resources
Many suitable text-books are available for further reading through the 成人大片 Library, and are available for purchase from text-book suppliers.
Recommended reading:- Welding Metallurgy, 2nd Edition Sindo Kou ISBN: 978-0-471-43491-7
- Applied Welding Engineering , Ramesh Singh ISBN: 978-0-12-391916-8
Online Learning
Electronic copies of the lecture notes as well as any additional material provided in-class will be available through the online MyUni system. Extended study material will also be provided through the online system for students keen to gain further knowledge and application.
-
Learning & Teaching Activities
Learning & Teaching Modes
Teaching will conducted through a series of lectures, practical session’s industry workshops.
Assignments and in-class quizzes are provided as part of the learning experience. Students are expected to enhance their knowledge, problem solving skills and understanding of the subject matter through completing the assignments and quizzes, so they are regarded as formative rather than summative. The assignments and quizzes are marked, with the mark contributing to the final grade for the subject to ensure that students actually do the assignments and quizzes and take them seriously. It also helps to assess whether the required graduate attributes are being developed.
The laboratory class is intended to provide students with some practical experience in using welding techniques. The examination is a summative assessment and is intended to assess the student’s knowledge and understanding of the course material and how it fits into the global engineering context.
Workload
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
This intensive course will consist of 50 contact hours. Students are expected to match these hours with an equivalent of self-study hours.
Learning Activities Summary
- Day 1: Welding Processes
- Introduction/ Overview
- Welding Process Fundamentals
- Day 2: Metallurgy of the welding of metals
- Overview - types of materials, structure and properties of metals, phase diagrams, strengthening mechanisms
- Steels - metallurgy, and heat-treatment, carbon equivalent, weldability index
- Welding of alloy steels, characteristics and effects of alloying elements
- Welding of Q&T steels
- Welding of stainless steels
- Welding of aluminium and its alloys
- Welding of cast irons
- Wear resistant materials and hard facing
- Day 3: Welding Specification
- Welder qualification
- Weld qualification and consumables
- Weld procedures
- PQR
- Welding Economics
- Processes
- Skill level
- Consumables
- Risk management
- Day 4: Welding Processes Workshop
- Day 5: Tutorials and Assignment
- Day 6: Design requirement
- Structural design and analysis
- Primary stresses
- Residual stresses
- Undermatching, overmatching, matching to base material
- Day 7: Failure modes
- Environment
- Consequences of Failure
- Weld repair
- Health and safety
- Electrocution
- Fume
- Confined spaces
- Day 8: NDT
- Day 9: Workshop
- Day 10: Tutorials and Assignment 2
- Day 1: Welding Processes
-
Assessment
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Summary
Assessment Task Weighting (%) Individual/ Group Formative/ Summative Due (week)* Hurdle criteria Learning outcomes Workshops 10 Tutorials and assignments 20 Final exam 70 Total 100
This assessment breakdown complies with the University's Assessment for Coursework Programs Policy.
Open book, 3 hours, 1 week after completion of second week
Assessment Detail
No information currently available.
Submission
No information currently available.
Course Grading
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through .
-
Student Feedback
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
-
Student Support
- Academic Integrity for Students
- Academic Support with Maths
- Academic Support with writing and study skills
- Careers Services
- Library Services for Students
- LinkedIn Learning
- Student Life Counselling Support - Personal counselling for issues affecting study
- Students with a Disability - Alternative academic arrangements
-
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangements Policy
- Academic Integrity Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs Policy
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment Policy
- Reasonable Adjustments to Learning, Teaching & Assessment for Students with a Disability Policy
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
-
Fraud Awareness
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.
The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.