成人大片

MECH ENG 4105 - Advanced Vibrations

North Terrace Campus - Semester 2 - 2024

Students will be introduced to the vibrations of complex systems including multi-degree-of-freedom and continuous systems. System modelling via the use of energy analysis and its application to complex vibrating systems will be discussed. The fundamentals of vibrations of continuous systems such as strings, beams and plates will be explained. Nonlinearities in vibration behaviour of mechanical systems will be analysed and the fundamentals of flow-induced vibrations and dynamics of Micro- Electro-Mechanical Systems (MEMS) will be explained.

  • General Course Information
    Course Details
    Course Code MECH ENG 4105
    Course Advanced Vibrations
    Coordinating Unit Mechanical Engineering
    Term Semester 2
    Level Undergraduate
    Location/s North Terrace Campus
    Units 3
    Contact Up to 4 hours per week
    Available for Study Abroad and Exchange Y
    Assumed Knowledge MECH ENG 3028, in particular an understanding of the principles of vibrations, including the influence of mass, stiffness and damping; an understanding of the concepts of vibration modes and natural frequencies; and familiarity with Matlab.
    Restrictions Available to all programs offered by the School of Mechanical Engineering
    Assessment Assignments, laboratory experiment, final exam
    Course Staff

    Course Coordinator: Dr Mergen Ghayesh

    Course Timetable

    The full timetable of all activities for this course can be accessed from .

  • Learning Outcomes
    Course Learning Outcomes
    On successful completion of this course students will be able to:

     
    1 Discuss the principles of vibrations;
    2 Explain the concepts of vibration modes and natural frequencies and their measurement and estimation for multi-degree-of-freedom systems;
    3 Discuss System Modelling via use of Energy Analysis and its application to complex vibrating systems;
    4 Explain vibration analysis concepts and experimental techniques including modal analysis;
    5 Recognise the use of different numerical techniques and its application to vibration design;
    6 Explain the fundamentals of flow-induced vibrations;
    7 Explain the behaviour of a mechanical system, by analysing nonlinearities in vibration behaviour;
    8 Analyse the vibration behaviour of Micro-Electro-Mechanical Systems (MEMS) for performance enhancement purposes
    9 Explain the fundamentals of vibrations of continuous systems such as beams and plates
    10 Critically review the literature including patents and synthesise the information with calculations to assess the feasibility of technology concepts.

     
    The above course learning outcomes are aligned with the Engineers Australia . The course develops the following EA Elements of Competency to levels of introductory (A), intermediate (B), advanced (C):  
     
    1.11.21.31.41.51.62.12.22.32.43.13.23.33.43.53.6
    C A C C C C C B A C B C C C C
    University Graduate Attributes

    This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:

    University Graduate Attribute Course Learning Outcome(s)

    Attribute 1: Deep discipline knowledge and intellectual breadth

    Graduates have comprehensive knowledge and understanding of their subject area, the ability to engage with different traditions of thought, and the ability to apply their knowledge in practice including in multi-disciplinary or multi-professional contexts.

    1-10

    Attribute 2: Creative and critical thinking, and problem solving

    Graduates are effective problems-solvers, able to apply critical, creative and evidence-based thinking to conceive innovative responses to future challenges.

    1-10

    Attribute 3: Teamwork and communication skills

    Graduates convey ideas and information effectively to a range of audiences for a variety of purposes and contribute in a positive and collaborative manner to achieving common goals.

    10

    Attribute 4: Professionalism and leadership readiness

    Graduates engage in professional behaviour and have the potential to be entrepreneurial and take leadership roles in their chosen occupations or careers and communities.

    10
  • Learning Resources
    Required Resources

    Course notes – these are essential and required.

    Recommended Resources

    1.     Inman, Daniel J., Engineering Vibration, Prentice Hall, Second Edition, 2001.

    2.     Leonard Meirovitch, Fundamentals of Vibrations, McGrawHill, (any edition)

    3.     Jon J. Thomsen, Vibrations and Stability, Springer, Second Edition, 2003

    4.     Mohammad I. Younis, MEMS Linear and Nonlinear Statics and Dynamics, Springer, First Edition, 2010

    5.     Ewins, D.J., Modal Testing: Theory, Practice and Application, Second Edition, Research Studies Press, 2000.

    Online Learning
    Lectures complemented by online resources available on MyUni, including lecture recordings.
  • Learning & Teaching Activities
    Learning & Teaching Modes
    Lectures are supported by problem-solving tutorials and workshops.
    Workload

    No information currently available.

    Learning Activities Summary
    • Principles of vibrations
    • System modelling using Newton's method
    • System modelling using Lagrange's method
    • Mass, damping, stiffness and force matrices
    • Vibrations of continuous system: strings
    • Vehicle vibrations
    • Natural frequencies and mode shapes of multi DOF systems
    • Vibrations of continuous system: beams
    • Vibration-based energy harvesters
    • Forced vibrations of multi-DOF systems
    • Flow-induced vibrations
    • Nonlinear vibrations and MEMS nonlinear vibrations
  • Assessment

    The University's policy on Assessment for Coursework Programs is based on the following four principles:

    1. Assessment must encourage and reinforce learning.
    2. Assessment must enable robust and fair judgements about student performance.
    3. Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
    4. Assessment must maintain academic standards.

    Assessment Summary
    Assessment Task Task Type Individual / Group Due (week)* Weighting Hurdle criteria Learning Outcomes
    Course project(s)

    Formative & Summative

    Individual & Group

    TBD

    20%
    Assigments

    Formative

    Individual

    TBD 15%
    Exam

    Summative

    Individual

    Exam Period 65% Minimum Mark:  26/65
    Assessment Detail

    No information currently available.

    Submission
    All assignments must be submitted as instructed in MyUni. Late submission incurs a 5 marks penalty per day (including the weekend).
    Course Grading

    Grades for your performance in this course will be awarded in accordance with the following scheme:

    M10 (Coursework Mark Scheme)
    Grade Mark Description
    FNS   Fail No Submission
    F 1-49 Fail
    P 50-64 Pass
    C 65-74 Credit
    D 75-84 Distinction
    HD 85-100 High Distinction
    CN   Continuing
    NFE   No Formal Examination
    RP   Result Pending

    Further details of the grades/results can be obtained from Examinations.

    Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.

    Final results for this course will be made available through .

  • Student Feedback

    The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.

    SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.

  • Student Support
  • Policies & Guidelines
  • Fraud Awareness

    Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.

The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.