MECH ENG 2100 - Design Practice

Course Details

Course Code	MECH ENG 2100
Course	Design Practice
Coordinating Unit	School of Mechanical Engineering
Term	Semester 1
Level	Undergraduate
Location/s	North Terrace Campus
Units	3
Contact	Up to 7 hours per week
Available for Study Abroad and Exchange	Y
Incompatible	MECH ENG 2018
Assumed Knowledge	MATHS 1012, C&ENVENG1010 & MECH ENG 1007
Restrictions	Available to BE(Mechanical & Aerospace), BE(Mechanical & Automotive), BE(Mechanical), BE(Mechatronic), BE(Mechanical & Sports), BE(Mechanical & Sustainable Energy) and associated double and combined degree students only
Assessment	Assignments 20%, projects 30%, practicals 10%, final exam 40%

Course Staff

Course Coordinator: Dr Antoni Blazewicz

Name	Role	Building/Room	Email
Dr Antoni Blazewicz	Lecturer	Engineering South Building,S310	antoni.blazewicz@adelaide.edu.au

Course Timetable

The full timetable of all activities for this course can be accessed from .

Course Learning Outcomes

On successful completion of this course students will be able to:

1	Use a systems approach to design problems;
2	Identify and analyse a number of sub-systems commonly used in mechanical design;
3	Design such sub-systems using both first principles and according to standard processes;
4	Review the principles of OH&S in a potentially hazardous environment;
5	Interpret design requirements from a manufacturing perspective;
6	Recognise the limitations that manufacturing methods can impose on design;
7	Explain the problems that overtly simplified or complex designs can impose upon manufacturing;
8	Demonstrated ability to work in a team environment; and
9	Write a technical report.

The above course learning outcomes are aligned with the Engineers Australia .
The course is designed to develop the following Elements of Competency: 1.1 1.2 1.3 1.4 1.5 2.1 2.2 2.3 2.4 3.1 3.2 3.3 3.4 3.5 3.6

University Graduate Attributes

This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:

University Graduate Attribute	Course Learning Outcome(s)
Deep discipline knowledge informed and infused by cutting edge research, scaffolded throughout their program of studies acquired from personal interaction with research active educators, from year 1 accredited or validated against national or international standards (for relevant programs)	1-7,9
Critical thinking and problem solving steeped in research methods and rigor based on empirical evidence and the scientific approach to knowledge development demonstrated through appropriate and relevant assessment	1-7,9
Teamwork and communication skills developed from, with, and via the SGDE honed through assessment and practice throughout the program of studies encouraged and valued in all aspects of learning	1-3,8,9
Career and leadership readiness technology savvy professional and, where relevant, fully accredited forward thinking and well informed tested and validated by work based experiences	1,3,8
Intercultural and ethical competency adept at operating in other cultures comfortable with different nationalities and social contexts able to determine and contribute to desirable social outcomes demonstrated by study abroad or with an understanding of indigenous knowledges	1,8
Self-awareness and emotional intelligence a capacity for self-reflection and a willingness to engage in self-appraisal open to objective and constructive feedback from supervisors and peers able to negotiate difficult social situations, defuse conflict and engage positively in purposeful debate	8

Required Resources

Design for Function Notes and Design Project Notes, and Level 2 Labbook – all available from the Image & Copy Centre

Recommended Resources

Text books:

Shigley’s Mechanical Engineering Design (8th SI edition) by Budynas R.G. and Nisbett J.K., McGraw Hill, 2008
Engineering Design Process by Haik Y., Thomson

Online Learning

The material available through MyUni:

Course Outline and Introduction
Course Content
Timetable
Lecture Notes
Assignments
Solutions
Past exams
Labbook

MyUni is also used to communicate important announcements.

Learning & Teaching Modes

Lectures supported by modes developing material covered in lectures. These modes include problem-solving tutorials, design project tutorials, and laboratories.

Workload

The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

Course workload includes 20 hours lectures, 56 hours tutorials and 6 hours laboratory classes.

Learning Activities Summary

Design for Function:

Design Process and basic calculations -1 hr lecture + 3 hrs tutorial
- design calculations - report format precision and rounding of quantities
- free-body diagrams
- equations for linear and angular motion.
Friction Clutch Design -1 hr lecture + 3 hrs tutorial
- function, classification
- plate clutch design - design parameters and equations
- friction materials
Brake Design -1 hr lecture + 3 hrs tutorial
- function, classification
- band brake design - design parameters and equations
Flat Belt Drives -1 hr lecture + 3 hrs tutorial
- geometry and belt construction
- design parameters and equations
V Belt & Chain Drives -1 hr lecture + 3 hrs tutorial
- geometry and construction
- nomenclature
- design parameters and catalogue selection
Gear Drive Systems -1 hr lecture + 3 hrs tutorial
- Nomenclature
- types and construction of gears
- design parameters and equations
- shaft loads
Rubbing Bearings -1 hr lecture + 3 hrs tutorial
- operation principles
- material properties
- bearing selection
Oil Film Bearings -1 hr lecture + 3 hrs tutorial
- operation principles
- design criteria and bearing selection
Rolling Element Bearings -2 hrs lectures + 2 x 3 hrs tutorial
- Classification
- types and characteristics
- selection procedure
- lubrication, seals, installation
- case study of bearing selection

Design Project:

Design Process -3 hrs lectures + 3 x 2 hrs tutorial
- Design specification
- Conceptual design
- Function analysis
- Embodiment design
Organising a Group Project -1 hr lecture + 2 hrs tutorial
- design planning
- Team Work - how to organise design effort
- Report writing
Work on competition project -21 hrs
- building and testing
- school finals
Preparation of a project report

Specific Course Requirements

Laboratories: This course includes two laboratories: Engine Disassembly – 2 hrs; Introduction to Measurement – 2 hrs. Details provided in level 2 Labbook.

The University's policy on Assessment for Coursework Programs is based on the following four principles:

Assessment must encourage and reinforce learning.
Assessment must enable robust and fair judgements about student performance.
Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
Assessment must maintain academic standards.

Assessment Summary

Assessment Task	Weighting (%)	Individual/ Group	Formative/ Summative	Due (week)*	Hurdle criteria	Learning outcomes
Weekly design tutorials	20	Group	Summative	Weeks 2-12		1. 2. 3. 5. 6. 7. 8. 9.
Warman competition	30	Group	Summative	Weeks 2-12	Min 35%	1. 2. 4. 5. 6. 7. 8. 9.
Laboratories	10	Individual	Formative	Weeks 2-12	Min 35%	2. 3. 8. 9.
Final exam	40	Individual	Summative			1. 3.
Total	100

* The specific due date for each assessment task will be available on MyUni.

This assessment breakdown is registered as an exemption to the University's . The exemption is related to the Procedures clause(s): 1. a. i 1. a. iii 1. b. 2.

This course has a hurdle requirement. Meeting the specified hurdle criteria is a requirement for passing the course.

Assessment Related Requirements

Students have to pass Design Project part of the course and obtain course total of at least 50%.

The Laboratories are compulsory part of a course. If a lab session is missed or a lab report not handed in or a student fails to get at least 35% of the total possible lab marks, then that is grounds for FAILURE of the entire course.

Assessment Detail

Assignments – group, distributed through a semester every week;

Design Project – group, assessment based on two design reports and performance in a competition;

Laboratory – assessment based on lab participation and a report;

Final exam – open-book, 3 hours.

Submission

Assignments and lab reports should be submitted via corresponding Course Submission Box located on Level 2 of Engineering South Building. A penalty for late submission will be applied – 10% per working day (weekends and holidays not included). In special cases extensions can be granted on individual basis. A “turn-around” timeline on assessments and the provision of feedback to students is approximately 2 weeks. . Re-submission of work is not allowed.

Course Grading

Grades for your performance in this course will be awarded in accordance with the following scheme:

M10 (Coursework Mark Scheme)
Grade	Mark	Description
FNS		Fail No Submission
F	1-49	Fail
P	50-64	Pass
C	65-74	Credit
D	75-84	Distinction
HD	85-100	High Distinction
CN		Continuing
NFE		No Formal Examination
RP		Result Pending

Further details of the grades/results can be obtained from Examinations.

Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.

Final results for this course will be made available through .

The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.

SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.

This section contains links to relevant assessment-related policies and guidelines - all university policies.

Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.

Authorised by:	Deputy Vice-Chancellor and Vice-President (Academic)
Maintained by:	Course Outlines Administrator

成人大片