C&ENVENG 2071 - Water Engineering IIA
North Terrace Campus - Semester 1 - 2014
-
General Course Information
Course Details
Course Code C&ENVENG 2071 Course Water Engineering IIA Coordinating Unit School of Civil, Environmental & Mining Eng Term Semester 1 Level Undergraduate Location/s North Terrace Campus Units 3 Contact Up to 3 hours per week, 4 laboratory sessions and 6 hours for the design project Incompatible C&ENVENG 2033 or C&ENVENG 2035 Assumed Knowledge C&ENVENG 1010 & MATHS 1012 or MATHS 1014 Assessment Exam 60%, course work 40% (including assignments, laboratory reports and design project) Course Staff
Course Coordinator: Dr Angela Marchi
Course Coordinator and Lecturer: Dr Angela Marchi
Room N124, Engineering North Building, angela.marchi@adelaide.edu.au
ph: 8313 1113. Consulting times will be provided.
Lecturer: Prof. Martin Lambert
Room N231g, Engineering North Building, martin.lambert@adelaide.edu.au
ph: 8313 5838. Consulting times will be provided.
Tutors and demonstrators will be available for assistance during the tutorials, laboratory practical sessions and the design project.Course Timetable
The full timetable of all activities for this course can be accessed from .
The full timetable of all activities for this course can be accessed from .
-
Learning Outcomes
Course Learning Outcomes
On successful completion of this course students will be able to:
Technical knowledge and application of knowledge skills
1. Apply the underlying governing equations for behaviour of flows and pressures in pipe systems and open channels
2. Analyse, design and optimise pipe systems and open channels.
3. Develop competence in using computers and information technology effectively in (1) carrying out computations for pipe and open channel flow (2) preparing reports to present results of designs.
4. Develop the ability to prepare and interpret engineering sketches and drawings of pipe systems and open channels.
5. Become aware of uncertainty (e.g. in the estimation of peak day water demands) and recognising limitations of engineering approaches and systems.
Thinking skills
6. Develop competence in critical and independent thinking in identifying, formulating and solving water related problems.
7. Develop the ability to effectively synthesize information and ideas in relation to issues relating to water system design – assumptions, design criteria, reliability.
Personal skills and attitudes
8. Develop the ability to work effectively as a member of a team (working on assignments and projects), including the development of written, oral and listening skills.
9. Develop the ability to manage effectively the allocation of time in performing tasks by meeting the deadlines for submission of assignments and projects.
10. Develop life long learning skills.University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Knowledge and understanding of the content and techniques of a chosen discipline at advanced levels that are internationally recognised. 1, 2, 3, 4, 5 The ability to locate, analyse, evaluate and synthesise information from a wide variety of sources in a planned and timely manner. 6, 7, 9 An ability to apply effective, creative and innovative solutions, both independently and cooperatively, to current and future problems. 6, 8 Skills of a high order in interpersonal understanding, teamwork and communication. 8 A proficiency in the appropriate use of contemporary technologies. 2, 3 A commitment to continuous learning and the capacity to maintain intellectual curiosity throughout life. 10 -
Learning Resources
Required Resources
It is essential to buy the text book: Engineering Fluid Mechanics, 10th Edition, by Donald F. Elger, Barbara C. Williams, Clayton T. Crowe, and John A. Roberson, John Wiley and Sons Inc.
You will be expected to read the text as this is an important source of material from which you will learn. Assignment and tutorial questions will be taken from the text. For many assignment questions you will need to read thoroughly the Chapter from which the questions are taken. The exam is restricted open book and the text book by Elger is one of the items that you can take into the exam. The textbook may be purchased at the University Bookshop (or elsewhere).
The other item that may be taken into the exam is the set of notes: Water Distribution Systems Engineering by Angus Simpson, Chapters 1 to 6. These notes may be purchased from the Image and Copy Centre or downloaded from MyUni under Course Material.
The lectures are a critical component of the course. The lecture recordings (powerpoint slides and audio) will be available on MyUni after the lectures for review and for students who are absent. If a lecture is missed it is essential to view the recording prior to the next scheduled contact time. The PowerPoint slides from the lectures, laboratory notes and further resources will be made available electronically via MyUni.Recommended Resources
Another book allowed in the exam is the “Flow in Open Channels” by K. Subramanya (3rd edition). This book is only recommended and not required for the course.
Additional recommended books (not allwed in the exam) are:
- Streeter and Wylie: Fluid Mechanics. SI Version
- Hunter Rouse: Engineering Hydraulics
- Hunter Rouse and Simon Ince: History of Hydraulics (for interest)
Online Learning
Additional resources such as assignments, tutorial questions and the design project will be provided on MyUni. Students are expected to regularly check on MyUni for course announcements and utilise the Discussion Board for additional contact.
Tutorial sheets, laboratory and design resources will be provided electronically in an effort to reduce the amount of paper waste generated throughout the semester. Students may print their own copies or use the resources online. -
Learning & Teaching Activities
Learning & Teaching Modes
This course uses a number of different teaching and learning approaches including:
- Lectures
- Problem Solving Tutorials
- In class quizzes, demonstrations and activities
- Laboratory Practicals
- Design project
- Examinations
Workload
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
There will be 26 lectures and 9 tutorials, with an assignment associated with each tutorial. 6 hours of practicals throughout the semester will be undertaken in groups of 5 or 6 with individual submissions due 1 week after the laboratory session. The design project in weeks 8, 9 & 10 will consist of group work (groups of 4).
Please note that for each formal contact hour it is expected that a minimum of 2 additional hours of independent study are undertaken.Learning Activities Summary
Nine of the Wednesday lecture times will be utilised for tutorials, the class will be split into 2 groups during this time, with each group assigned a different location. The lecture schedule is shown below and is subject to change. Please note that the scheduling of the lecture on design concepts is subject to the availability of the guest lecturer.
Week Day Time Lecture Topic Lecture Theatre 1 M 1pm L1: Introduction and Background Physics 103, Kerr Grant 1 W 1pm L2: Fluid Properties Physics 103, Kerr Grant 1 T 1pm L3: Fluid Statics #1 Mawson Labs G19 2 M 1pm Public Holiday - Adelaide Cup Day, no lecture - 2 W 1pm L4: Fluid Statics #2 Physics 103, Kerr Grant 2 T 1pm L5: Fluid Motion #1 Mawson Labs G19 3 M 1pm L6: Fluid Motion #2 Physics 103, Kerr Grant 3 W 1pm Tutorial 1: Fluid Properties and Fluid Statics Various 3 T 1pm L7: Fluid Motion #3 Mawson Labs G19 4 M 1pm L8: Momentum Equation and Examples Physics 103, Kerr Grant 4 W 1pm Tutorial 2: Fluid Motion Various 4 T 1pm L9: Dimensional Analysis Mawson Labs G19 5 M 1pm L10: Laminar Flow Physics 103, Kerr Grant 5 W 1pm Tutorial 3: Momentum and Dimensional Analysis Various 5 T 1pm L11: Turbulent Flow #1 Mawson Labs G19 6 M 1pm L12: Turbulent Flow #2 Physics 103, Kerr Grant 6 W 1pm Tutorial 4: Laminar and Turbulent flow Various 6 T 1pm L13: Turbulent Flow #3 + Minor Losses Mawson Labs G19 7 M 1pm L14: Simple pipelines Physics 103, Kerr Grant 7 W 1pm Tutorial 5: Turbulent Flow + Minor Loss Various 7 T 1pm Guest Lecture 15: Design Concepts Mawson Labs G19 8 M 1pm L16: Open Channel Flow #1 Physics 103, Kerr Grant 8 T 1pm DESIGN SESSION 1 EM205/B21 8 W 1pm L17: Open Channel Flow #2 Physics 103, Kerr Grant 8 T 1pm L18: Uniform Flow Mawson Labs G19 9 M 1pm L19: Specific Energy and Critical Depth Physics 103, Kerr Grant 9 T 1pm DESIGN SESSION 2 EM205/EM212 9 W 1pm Tutorial 6: Open Channel Flow Various 9 T 1pm L20: Transitions Mawson Labs G19 10 M 1pm L 21: Hydraulic Jumps Physics 103, Kerr Grant 10 T 1pm DESIGN SESSION 3 EM205/B21 10 W 1pm Tutorial 7: Uniform Flow and Critical Depth Various 10 T 11am L22: Gradually Varied Flow Mawson Labs G19 11 M 11am L23: Gradually Varied Flow computations DSM Physics 103, Kerr Grant 11 W 1pm Tutorial 8: Transitions and Hydraulic Jumps Various 11 T 1pm L24: Gradually Varied Flow computations SSM Mawson Labs G19 12 M 1pm L25: Course Review + exam revision Physics 103, Kerr Grant 12 W 1pm Tutorial 9: Gradually Varied Flow Various 12 T 1pm L26: Course review + exam revision Mawson Labs G19 -
Assessment
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Summary
Assessment Task Submission Due Date Weighting Learning Objectives Assignments Individual Fridays 11am 15% 1, 2, 6, 9, 10 Laboratory Individual 1 week after session 10% 1, 3, 4, 6-10 Design Project Groups of 4 2pm 27/05/2014 15% 1-10 Exam Individual During Exam Period 60% 1, 2, 6, 7 Assessment Related Requirements
Students must obtain at least 40% in the final examination to be eligible to pass the course. Please be aware that you may be eligible for an academic supplementary exam if you fail to meet this requirement. If a student sits a supplementary exam on academic grounds, the final mark will be based on that examination only. Failure to demonstrate a necessary level of knowledge and understanding of the course material in the supplementary exam will result in a fail grade.
Students must attend their scheduled laboratory sessions, make up sessions will not be allowed. Students who miss a session due to illness should provide a medical certificate and contact Angela Marchi as soon as possible. Students must obtain at least 50% for each of the laboratory reports to be eligible to pass the course. Resubmission of reports that do not meet this criteria will be allowed, however a maximum mark of 50% will be applied.
Students are required to follow the Occupational Health and Safety requirements of the laboratories. Any student not complying with the requirements will be ejected from the laboratory and receive a zero for that experiment.
Applications for exemptions from portions of the course that a student has passed in 2011 and 2012 only (not 2010 or prior) must be applied for by the end of week 2 (5:00pm Friday). Exemptions WILL ONLY be given for Laboratories and/or Designs. A mark of 50% will be given as credit for the portions that exemptions are granted for.Assessment Detail
Assignments:
For each tutorial a list of questions from the textbook will be set. In general, two questions will be selected for marking.
Laboratories:
4 x 1.5 hours of practicals will be undertaken in groups of 5 or 6 with individual reports to be submitted 1 week after the practical session. Students are expected to read the practical information and complete the online quiz prior to attending the laboratory session, a deduction of 20% will be applied to laboratory report if the quiz is not completed. Students are required to follow the Occupational Health and Safety requirements of the laboratories. Any student not complying with the requirements will be ejected from the laboratory.
Design Project:
The design project will consist of group work during weeks 8 to 11, with formal design sessions held in weeks 8, 9 & 10. The design project allows the skills developed over the course of the semester to be used in a real world situation. Peer assessment will be conducted. Further details will be provided before the project commences.
Examination:
A 3 hour examination will be held at the end of Semester 1. It will be a restricted open book exam.- The textbook by Elger (or the previous edition by Crowe), Prof Simpson’s book notes (Chapters 1 to 6), and the "Flow in Open Channels" by Subramanya are allowed. NO OTHER BOOKS OR MATERIAL may be brought into the examination. Information relating to Fluid Properties will be permitted.
- The design, laboratory practical write-ups, tutorial solutions and worked problems including solutions to old examination problems, may NOT BE brought into the examination. A check of the material brought in by each student will be made at the beginning of the examination.
- Use of dictionaries is permitted.
Submission
Submission of assessment tasks will be via the boxes outside the School Office or online via MyUni. The penalty for late submissions of the design project is 10% per day or part thereof of being late. Late submissions will in most other cases will receive a zero mark. A late submission will only be allowed when a deferred deadline has been approved by the course coordinator prior to the due date because of medical or extenuating circumstances. Any requests for extensions must be communicated by email.Course Grading
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through .
-
Student Feedback
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
-
Student Support
- Academic Integrity for Students
- Academic Support with Maths
- Academic Support with writing and study skills
- Careers Services
- Library Services for Students
- LinkedIn Learning
- Student Life Counselling Support - Personal counselling for issues affecting study
- Students with a Disability - Alternative academic arrangements
-
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangements Policy
- Academic Integrity Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs Policy
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment Policy
- Reasonable Adjustments to Learning, Teaching & Assessment for Students with a Disability Policy
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
-
Fraud Awareness
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.
The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.
