成人大片

PHYSICS 1508 - Physical Aspects of Nature I (Vet Bioscience)

North Terrace Campus - Semester 1 - 2025

This course provides an introduction to some of the principles of physics and their applications in agricultural and biological sciences. It is intended for students who have not studied SACE Stage 2 Physics, and who require familiarity with Physics principles and applications in their other studies. The course introduces concepts of force, energy, thermal physics, fluids and DC electricity, introduction to practical problem solving.

  • General Course Information
    Course Details
    Course Code PHYSICS 1508
    Course Physical Aspects of Nature I (Vet Bioscience)
    Coordinating Unit Physics
    Term Semester 1
    Level Undergraduate
    Location/s North Terrace Campus
    Units 3
    Contact Up to 7 hours per week
    Available for Study Abroad and Exchange N
    Incompatible PHYSICS 1008, PHYSICS 1008UAC, PHYSICS 1101, PHYSICS 1501 & PHYSICS 1100
    Restrictions Available to BSc (Veterinary Bioscience) students only
    Assessment Written exam, workshop preparation, practical work & In-Semester tests
    Course Staff

    Course Coordinator: Associate Professor Andrew MacKinnon

    Course Timetable

    The full timetable of all activities for this course can be accessed from .

  • Learning Outcomes
    Course Learning Outcomes
    1 demonstrate a working knowledge of the physical principles that describe mechanics, fluids, electricity and thermal physics;
    2 make qualitative and semi-quantitative predictions about the behaviour of the aforementioned systems;
    3 identify aspects of nature which can be understood using physical principles;
    4 apply an understanding of physical principals to familiar and unfamiliar situations in nature;
    5 make appropriate use of standard measurement and data analysis techniques;
    6 draw non-trivial conclusions from experimental results;
    7 work cooperatively in a team to complete a task in a limited time
    8 confidently communicate results about the physical world both orally and in writing
    University Graduate Attributes

    This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:

    University Graduate Attribute Course Learning Outcome(s)

    Attribute 1: Deep discipline knowledge and intellectual breadth

    Graduates have comprehensive knowledge and understanding of their subject area, the ability to engage with different traditions of thought, and the ability to apply their knowledge in practice including in multi-disciplinary or multi-professional contexts.

    1-6

    Attribute 2: Creative and critical thinking, and problem solving

    Graduates are effective problems-solvers, able to apply critical, creative and evidence-based thinking to conceive innovative responses to future challenges.

    2-6

    Attribute 3: Teamwork and communication skills

    Graduates convey ideas and information effectively to a range of audiences for a variety of purposes and contribute in a positive and collaborative manner to achieving common goals.

    7-8

    Attribute 8: Self-awareness and emotional intelligence

    Graduates are self-aware and reflective; they are flexible and resilient and have the capacity to accept and give constructive feedback; they act with integrity and take responsibility for their actions.

    7-8
  • Learning Resources
    Required Resources

    Urone, P. and Hinrichs, R. (2013) College Physics (OpenStax College)

    This is a free open-source textbook that can be downloaded as a pdf, epub or viewed directly on the web from  

    OR

    Giancoli, D. C. (2005) Physics Principles with Applications, 6th ed. (Pearsons/Prentice Hall)
    Recommended Resources
    • Kirkup, L. (1994) Experimental Methods, (Wiley)
    • OpenStax textbook home page:  
    • Giancoli textbook home page:  
    • School home page:  
    Online Learning

    MyUni: Teaching materials and course documentation will be posted on the MyUni website ().

  • Learning & Teaching Activities
    Learning & Teaching Modes

    This course will be delivered by the following means:

    • 3 lectures of 1 hour per week
    • 1 workshop of 1 hour per week
    • 1 practical of 3 hours per fortnight
    Workload

    The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

    A student enrolled in a 3 unit course, such as this, should expect to spend, on average 12 hours per week on the studies required. This includes both the formal contact time required to the course (e.g., lectures and practicals), as well as non-contact time (e.g., reading and revision).

    Learning Activities Summary

    The course content will include the following:

    Coursework Content

    Mechanics (50%)

    • Random and systematic uncertainties in measurements
    • Kinematics overview: motion diagrams for linear motion; graphical representation of linear motion; representing motion in two dimensions
    • Dynamics overview: force and Newton's laws of motion; some everyday forces; isolating the system of interest; constructing force diagrams.
    • Vectors - adding, subtracting, resolving.
    • Dynamics applications: linear motion of a simple object with constant acceleration; linear motion of connected objects with constant acceleration; circular motion with constant speed; projectile motion.
    • Rotational motion and statics: centre of mass; torque; conditions for equilibrium; levers in the human body; applications of statics.
    • Mechanics of solids: elasticity, stress and strain; loading and fracture.
    • Work, heat and energy: transformation and transfer of energy; kinetic and potential energy; work, power, efficiency and metabolic rate; conservative and dissipative forces; collisions.
    • Applications of mechanics (e.g. skeletal structure and animal/human movement)

    Fluids (17%)

    • Fluid statics: definition of a fluid; density and specific gravity; pressure (atmospheric, gauge, absolute); Pascal's principle; buoyancy; Archimedes' principle; floating objects.
    • Fluid dynamics: streamlines; turbulence; continuity; Bernoulli principle and its applications; viscosity; Newtonian fluids; Poiseuille's equation; surface tension; cohesion; adhesion; wetting; capillarity; Laplace's law;
    • Applications of fluids (e.g. wine in pipes, blood flow, blood pressure).

    Electricity (17%)

    • Electrostatics: electric charge; polar molecules; conductors and insulators; the electric field.
    • Electric potential: potential and potential energy; batteries; capacitors; dielectrics; storage of electric energy.
    • Electric currents: electric cells; batteries; current; Ohm's law; resistance; resistivity; electric shock; electric power in resistors; fuses and circuit breakers; alternating current (AC); RMS voltage; RMS power.
    • DC circuits: circuit symbols; resistors in a circuit; conservation of charge; resistors in series and in parallel; current through circuits; equivalent resistances; emf and internal resistance; capacitors in a circuit; RC Circuits; AC Circuits; Kirchhoff's rules.
    • Applications of electricity (e.g. nerve transmission, electrical safety)

    Thermal Concepts (17%)

    • Atomic theory of matter: Brownian motion; phases of matter.
    • Temperature: thermometers and temperature scales; constant volume gas; thermal equilibrium; thermal expansion; thermal stress.
    • Gas laws: equation of state; Boyle's law; Charles's law; Gay-Lussac's law; ideal gas law; the mole and Avogadro's number.
    • Kinetic theory: Maxwell distributions; real gases; phase diagrams; evaporative cooling; vapour pressure; boiling; partial pressure; relative humidity; diffusion.
    • Heat, work, and energy: internal energy; temperature; heat capacity and specific heat; latent heat of fusion and vaporization; heat transfer by conduction, convection and radiation.
    • Applications of thermal concepts (e.g. climate change, diffusion of gases in biological systems)

    Practical Work Content

    Computer based experiment, carried out individually:

    • Reaction time

    Experiments carried out in groups of three students:

    • Conservation of energy
    • Statics
    • Fluid flow
    • Voltage divider
    Specific Course Requirements

    An A4 lined book is required for the practicals. A 64 page book should be adequate.

  • Assessment

    The University's policy on Assessment for Coursework Programs is based on the following four principles:

    1. Assessment must encourage and reinforce learning.
    2. Assessment must enable robust and fair judgements about student performance.
    3. Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
    4. Assessment must maintain academic standards.

    Assessment Summary
    Modified arrangements have been made to assessments to facilitate remote learning and teaching.
    Assessment task Type of assessment Percentage of total assessment Hurdle
    Yes or No #
    Outcomes being assessed/achieved
    Workshop preparation and participation Formative & Summative 10% No 1, 2, 3, 4, 7, 8
    Practical work Formative & Summative 20% Yes
    (50% overall)
    1 – 8
    In – Semester Tests Formative & Summative 10% No 1, 2, 3, 4, 8
    Written Examination Summative 60% No 1, 2, 3, 4, 8
    Assessment Related Requirements

    To obtain a grade of Pass or better in this course, a student must total 50% and also achieve a result of at least 50% for the practical component.

    Assessment Detail

    Workshop preparation and participation (10% of the total course grade)
    Workshops are held weekly, starting in the second week.
    50% of the grade for the Workshop is based on the student’s preparation and participation during the workshop. 
    50% of the grade for the Workshop is based on a weekly Post-Workshop Quiz which is due before Friday 5pm.

    Practical work (20% of the total course grade)

    There are five practicals/experiments, 1 online and 4 in-lab, which are all compulsory and contribute equally to the practical component of your grade. For each in-laboratory practical, the student must obtain a satisfactory result in the preparatory work, attend the practical session and submit the logbook for assessment. The final grade for each practical will be a combination of the pre-lab quiz mark and the mark given for the submitted logbook. A practical catch-up session is held at the end of the teaching semester to allow students to catch up any missed practicals.

    In – Semester Tests (10% of the total course grade)
    Up to 5 tests will occur throughout the semester.  The test are online with a submission window of 8 hours, each test is written such that it can be completed in approximately 20 minutes.

    Examination (60% of the total course grade)
    The final examination will be based primarily on lecture/workshop material.

    Submission

    Submission of Assigned Work (including Workshop questions attempts, Practical log book and In-semester Tests)

    By submitting an assignment in-person or via MyUni students are agreeing to the following statement:

    I declare that all material in this assessment is my own work, except where there is clear acknowledgement and reference to the work of others. I have read the 成人大片's Academic Honesty Policy: /policies/230/ 

    I give permission for any assessed assignments to be reproduced and submitted to other academic staff for the purposes of assessment and to be copied, submitted and retained in a form suitable for electronic checking of plagiarism.


    Extensions for Assessment Tasks
    Extensions of deadlines for assessment tasks may be allowed for reasonable causes. Such situations would include compassionate and medical grounds of the severity that would justify the awarding of a supplementary examination. Evidence for the grounds must be provided when an extension is requested. Students are required to apply for an extension to the Course Coordinator before the assessment task is due. Extensions will not be provided on the grounds of poor prioritising of time.

    Late submission of assessments
    If an extension is not applied for, or not granted then a penalty for late submission will apply.  A penalty of 10% of the value of the assignment for each calendar day that the assignment is late (i.e. weekends count as 2 days), up to a maximum of 50% of the available marks will be applied. This means that an assignment that is 5 days late or more without an approved extension can only receive a maximum of 50% of the marks available for that assignment. 
    NOTE: Late submissions of In-semester Tests is not possible,  Workshop questions attempts can not be submitted after Friday 5pm of the week of the workshop.

    Course Grading

    Grades for your performance in this course will be awarded in accordance with the following scheme:

    M10 (Coursework Mark Scheme)
    Grade Mark Description
    FNS   Fail No Submission
    F 1-49 Fail
    P 50-64 Pass
    C 65-74 Credit
    D 75-84 Distinction
    HD 85-100 High Distinction
    CN   Continuing
    NFE   No Formal Examination
    RP   Result Pending

    Further details of the grades/results can be obtained from Examinations.

    Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.

    Final results for this course will be made available through .

  • Student Feedback

    The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.

    SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.

  • Student Support
  • Policies & Guidelines
  • Fraud Awareness

    Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.

The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.