MECH ENG 1007 - Engineering Mechanics - Dynamics
North Terrace Campus - Semester 2 - 2016
The course information on this page is being finalised for 2016. Please check again before classes commence.
-
General Course Information
Course Details
Course Code MECH ENG 1007 Course Engineering Mechanics - Dynamics Coordinating Unit School of Mechanical Engineering Term Semester 2 Level Undergraduate Location/s North Terrace Campus Units 3 Contact Total: 52 hours Available for Study Abroad and Exchange Y Prerequisites SACE Stage 2 Maths Studies, Specialist Maths, Physics or equivalent Assessment mid-semester test, assignments,lab classes and exam Course Staff
Course Coordinator: Mr Gareth Bridges
Name Role Building/Room Email Mr Gareth Bridges Lecturer Eng.&Maths .Sciences Building,EM206/207 gareth.bridges@adelaide.edu.au Course Timetable
The full timetable of all activities for this course can be accessed from .
-
Learning Outcomes
Course Learning Outcomes
On the completion of this course students are expected to be able to:
1 Understand basic kinematics concepts – displacement, velocity and acceleration (and their angular counterparts). 2 Understand basic dynamics concepts – force, momentum, work and energy. 3 Understand and be able to apply Newton’s laws of motion. 4 Understand and be able to apply other basic dynamics concepts - the Work-Energy principle,
Impulse-Momentum principle and the coefficient of restitution.5 Learn to solve dynamics problems. Appraise given information and determine which concepts apply, and choose an appropriate solution strategy. 6 Gain an introduction to basic machine parts such as pulleys and mass-spring systems. University Graduate Attributes
No information currently available.
-
Learning Resources
Required Resources
-
Dynamics Lab Notes – available from the Physics School Office.
-
Dynamics Lecture notes – available from Image & Copy Centre
-
Access to MyUni
Recommended Resources
-
Dynamics Lecture Notes – available from Image & Copy Centre
- Textbook: ‘Engineering Mechanics – Dynamics’, 12 Edition in SI Units, Hibbelar, R.C.
The Barr Smith library has many books which are concerned with Dynamics. Students are encouraged to consult these books to enrich their knowledge.
Textbook purchase is strongly recommended.
Consult your course co-ordinator for further recommendations
Online Learning
The material available online
- Course Outline and Introduction
- Course Content
- Timetable
- Lecture Notes
- Assignments
- Tutorials
- Solutions
- Past exams
- Noticeboard
Links to these facilities can be found on MyUni .
-
-
Learning & Teaching Activities
Learning & Teaching Modes
Lectures supported by modes developing material covered in lectures. These modes include problem-solving tutorials and a laboratory.
Workload
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
Course workload includes 42 hours of lectures and tutorials, and 9 hours of laboratory.
Learning Activities Summary
This course consists of combination of lectures and tutorials:
Rectilinear Motion, Coupled/Dependent Motion (3 hrs lectures/2 hrs tutorials) Curvilinear Motion (5 hrs lectures/2 hrs tutorials) Newton’s 2nd Law (6 hrs lectures/2 hrs tutorials) Work-Energy Principle/Potential Energy (5 hrs lectures/2 hrs tutorials) Impulse-Momentum Principle (4 hrs lectures/2 hrs tutorials) Rotational Kinetics (6 hrs lectures/2 hrs tutorials) Summary/Revision (1 hr lecture) Measurement (3 hrs laboratory) Conservation of Energy (3 hrs laboratory) Rotational Dynamics (3 hrs laboratory) Specific Course Requirements
Students must achieve at least 35% in each of the three assessment areas:
Exams – Final Examination
Mid-Semester Test
Assignments
Laboratory Work
-
Assessment
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Summary
All learning objectives are assessed through assignments, laboratories and examination.
Assignments 15%, laboratory 10%, mid-semester exam 10%, final exam 65%
Assessment Related Requirements
Students must achieve at least 35% in each of the three assessment areas:
Final Examination/Mid-Semester Test; Assignments; Laboratory Work
Assessment Detail
Assignments – 12 in total, individual, and available at the beginning of the semester. Submission dates are spaced at approximately one week intervals through the semester.
Laboratory – assessment based on a pre-lab online quiz, lab participation and lab practiceMid-semester exam – closed book, 50 minutes, covers first 4 chapters of the course notes
Final exam – closed-book, 3 hours, covers entire course.Submission
Assignment submission is by electronic submission on MyUni. Details will be provided by the lecturer. Engineering submission boxes on Level 2 of Engineering South.
No extensions are granted, but students may receive exemptions on medical or compassionate grounds.
The turnaround time for assessment is zero – as marking is simultaneous with the assignment deadline.
Course Grading
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through .
-
Student Feedback
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
-
Student Support
- Academic Integrity for Students
- Academic Support with Maths
- Academic Support with writing and study skills
- Careers Services
- Library Services for Students
- LinkedIn Learning
- Student Life Counselling Support - Personal counselling for issues affecting study
- Students with a Disability - Alternative academic arrangements
-
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangements Policy
- Academic Integrity Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs Policy
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment Policy
- Reasonable Adjustments to Learning, Teaching & Assessment for Students with a Disability Policy
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
-
Fraud Awareness
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.
The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.
