ELEC ENG 7069 - Electric Energy Systems

Course Details

Course Code	ELEC ENG 7069
Course	Electric Energy Systems
Coordinating Unit	School of Electrical & Electronic Engineering
Term	Semester 1
Level	Postgraduate Coursework
Location/s	North Terrace Campus
Units	3
Contact	Up to 7 hours per week
Available for Study Abroad and Exchange	Y
Assumed Knowledge	Undergraduate courses in Electrical and Electronic Engineering.
Assessment	Written exam, tutorials, online tests and practicals

Course Staff

Course Coordinator: Dr Andrew Allison

Course Coordinator and Lecturer: Dr Andrew Allison
Email.andrew.allison@adelaide.edu.au
Office: Ingkarni Wardli 3.51
Phone:8313 5283

Course Timetable

The full timetable of all activities for this course can be accessed from .

Course Learning Outcomes

On successful completion of this course students will be able to:

7Analyse the performance of transformers and explain concepts of the back-E.M.F
equation, saturation, and iron losses.

1	Describe and analyse electric power generation, based on principles of conversion of energy from other sources, including thermal, solar and wind.
2	Model an electric power system, by combining the fundamental major components.
3	Describe the basic principles of DC and AC electric machines and variable-speed drives.
4	Model, and analyse the major components of an electric traction drive.
5	Analyse the performance of a DC motor or generator using its equivalent circuit. Explain its construction and operating principles, including back-E.M.F, and efficiency.
6	Analyse single and three-phase AC power circuits using phasors, to determine real and reactive power flow and demonstrate power-factor correction.
7	Analyse the performance of transformers and explain concepts of the back-E.M.F equation, saturation, and iron losses.
8	Analyse the performance of an induction machine using its equivalent circuit. Explain the operating principles, construction and the concept of slip.
9	Explain the operating principles, construction and performance of synchronous machines.
10	Develop practical skills through performing tests on electrical machines to determine their parameters and performance. Analyse and discuss experimental results in reports.

The above course learning outcomes are aligned with the Engineers Australia .
The course is designed to develop the following Elements of Competency: 1.1 1.2 1.3 1.4 1.5 1.6 2.1 2.2 3.5 3.6

University Graduate Attributes

This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:

University Graduate Attribute	Course Learning Outcome(s)
Attribute 1: Deep discipline knowledge and intellectual breadth Graduates have comprehensive knowledge and understanding of their subject area, the ability to engage with different traditions of thought, and the ability to apply their knowledge in practice including in multi-disciplinary or multi-professional contexts.	1-10
Attribute 2: Creative and critical thinking, and problem solving Graduates are effective problems-solvers, able to apply critical, creative and evidence-based thinking to conceive innovative responses to future challenges.	2, 4,5, 6, 7, 8
Attribute 3: Teamwork and communication skills Graduates convey ideas and information effectively to a range of audiences for a variety of purposes and contribute in a positive and collaborative manner to achieving common goals.	10
Attribute 5: Intercultural and ethical competency Graduates are responsible and effective global citizens whose personal values and practices are consistent with their roles as responsible members of society.	10
Attribute 8: Self-awareness and emotional intelligence Graduates are self-aware and reflective; they are flexible and resilient and have the capacity to accept and give constructive feedback; they act with integrity and take responsibility for their actions.	10

Required Resources

The following required resources are available on the course website:

• Lecture notes: you can print these yourself, or purchase them from EEESAU (the local student branch of the Electrical and Electronic Engineering student society) at the beginning of the semester at reasonable cost, see signs around the Ingkarni Wardli building.

• Online tests: these are both available and submitted on the course website.

• Tutorial questions: these are available on the course website in the week leading up to the tutorial.

Recommended Resources

1) Practice problems are available on the course website for most of the course segments. Some of these will be used in the online tests and tutorial questions.

2) Reference Books
The course lecture notes should provide sufficient information for most students, however you may find the following reference books useful if you are have difficulty with the material or are interested in learning more about any of the topics in this course.
Copies of the following books are available in the Barr Smith library.
• T. Wildi : “Electrical Machines, Drives, and Power Systems”, Prentice Hall, 6th edition.
• P.C. Sen: "Electric Machines and Power Electronics Principles", Wiley, 2nd edition.

Online Learning

All course announcements will be made the course website. They will be available on the course announcement board.

The weekly online tests are conducted on the course website.

The use of the course discussion boards is strongly encouraged for questions relating to course material. Lecturers will make a best effort to respond promptly to questions raised on the discussion boards.

The course gradebook will be used to return continuous assessment marks. Students should check the Gradebook regularly and confirm their marks have been correctly entered.

Audio (and if facilities are available, also video) recordings of lectures will be made available on the course website. The video recordings consist of the image displayed on the digital projector. Note some lecture theatres have two digital projectors and in this case only the content displayed on one of the projectors will be available.

In addition, the following material will be provided on the course website at the start or during the course of the semester:
• Lecture notes and tutorial questions
• Past exams and quizzes
• Additional exercise problems

Learning & Teaching Modes

1. Review of Power and Energy
2. Electric Energy Systems Analysis
3. Electromagnetics and Transformers
4. Review of Electrical Machines Basics
5. Review of DC Machine Analysis
6. Review of AC Machines
7. Induction Machines
8. Synchronous Machines
9. Introduction to Power Generation and Energy Systems
This material is presented in lectures and supported by problem-solving tutorials, formative online tests and optional exercise problems.

Tutorial problems should be attempted before the tutorial and this preparation is assessed at the start of each tutorial. The tutor will also go through selected questions on the board and students will be given opportunities to ask questions.

Online tests are automatically marked. Wrong answers are indicated and correct answers are provided. Students may attempt an online test as many times as they wish before its due date, but on each attempt will have to try all questions again. Some numerical values in questions may change between attempts. Students will be awarded the maximum mark from all of their attempts of a particular online test.

10. Application Lecture
This lecture gives an example of the practical application of the theory taught in the course. It is not examinable.

Workload

The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

This is a 3 unit course. The University expects students to spend around 156 hours of work for a 3 unit course. This corresponds to roughly 12 hours per week. The following breakdown is a guide only. Some students will need to spend more time, some less.

Activity	Contact Hours	Non-contact Hours	Number	Total Hours
Lectures	1	1 (prep & revise*)	30	60
Special Lectures	1	0	1	1
Tutorials	1	2 (prep & revise*)	6	18
On-line Tests	0	3 (prep & revise*)	10	30
Practicals	3	9 (prep & write-up)	4	48
Total				157

* This includes time spent revising for the quizzes and the exam.

Learning Activities Summary

1. Introduction
3 lectures
Outline
1.1 Introduction to electrical machines, mechanical and electric power, efficiency, energy costs

2. Electric Energy Systems Analysis
3.5 lectures
Outline
2.1 DC circuit analysis revision.
2.2 AC circuit analysis: phasors, complex power (real, reactive, apparent power), real and reactive power flow, power-factor correction, equivalent series and parallel RL circuits.
2.3 Three-phase AC circuit analysis: balanced systems, power flow, star/delta, three-phase terminology, single-phase equivalent circuit, power measurement.

3. Electromagnetics and Transformers
5 lectures
Outline
3.1 Magnetostatics: magnetic circuits, mmf, flux, reluctance, magnetic flux density, magnetic field intensity, permeability, Ampere’s law, concepts of leakage, fringing and saturation.
3.2 Electromagnetics: flux-linkage, inductance, Faraday’s law, induced voltage, magnetic energy and force. C.3 Magnetic materials: saturation, BH loops, iron loss (eddy-current, hysteresis), permanent magnets.
3.3 Transformers: ideal transformers, back-emf equation, practical transformers (construction, equivalent circuit, analysis).

4. Review of Electrical Machines Basics
1.5 lectures
Outline
4.1 Types of machines: DC, AC (induction, synchronous and universal), torque vs. speed curves, variable-speed operation.

5. Review of DC Machine Analysis
2.5 lectures
Outline
5.1 Linear and rotary DC machines, principles, construction, equivalent circuit analysis, torque vs. speed curves, generator and motor operation.

6. Review of AC Machines
1.5 lectures
Outline
6.1 Rotating magnetic fields, synchronous machine principles and operation, induction machine principles and operation.

7. Induction Machines
4 lectures
Outline
7.1 Applications, construction, principles, equivalent circuits, performance prediction

8. Synchronous Machines
4 lectures
Outline
8.1 Per-unit analysis: principles, base quantities, conversion, analysis.
8.2 Synchronous machines: applications, construction, principles, equivalent circuits, performance prediction.

9. Introduction to Power Generation and Energy Systems
4 lectures
Outline
9.1 Generation, transmission, distribution and usage.
9.2 Transmission lines: physical construction, transposition, modelling, nominal π-equivalent circuit, surge impedance loading, use of multiple phase conductors.
9.3 Power system control: real and reactive power flow for lossless inductive line, reactive power control (effect on voltage, generators, synchronous compensators, static compensators), real power control (effect on frequency, generators).

10. Application Lecture
1 lecture
Outline
10.1 To be announced.

Specific Course Requirements

Laboratory clothing restrictions apply to the workshop sessions: closed-toe shoes; covered shoulders; long hair must be tied back. In addition, students must remove all hand and wrist based jewellery (including material bracelets), and must not eat or drink in the laboratories. Failure to adhere to these requirements will result in your removal from the laboratory.

The University's policy on Assessment for Coursework Programs is based on the following four principles:

Assessment must encourage and reinforce learning.
Assessment must enable robust and fair judgements about student performance.
Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
Assessment must maintain academic standards.

Assessment Summary

Due to the current COVID-19 situation modified arrangements have been made to assessments to facilitate remote learning and teaching. Assessment details provided here reflect recent updates.

Assessment Task	Weighting (%)	Individual/ Group	Formative/ Summative	Due (week)*	Hurdle criteria	Learning outcomes
Practical exerises	25	Individual	Summative	Week 6		5. 6. 7.
On-Line quizzes	15	Individual	Summative	Weeks 2 - 12		1-10.
Practical examination	10	Individual	Summative	Weeks 4 - 12	Min 40%	6. 7. 8.
Examination	50	Individual	Summative	Exam Period	Min 40%	1-10.
Total	100

* The specific due date for each assessment task will be available on MyUni.

This assessment breakdown is registered as an exemption to the University's . The exemption is related to the Procedures clause(s): 1. b. 3.

This course has a hurdle requirement. Meeting the specified hurdle criteria is a requirement for passing the course.

Assessment Related Requirements

A hurdle requirement is defined by the University's as "...an assessment task mandating a minimum level of performance as a condition of passing the course.

In the Electric Energy System course there are two hurdle requirements, for which it is necessary to achieve at least 40% in,
• examination
• experimental section
If both of these are not achieved, the total course mark will be limited to a maximum of 49.

If a student fails to meet a hurdle requirement (normally no less than 40%),and is assigned a total mark for the course in the range of 45-49, then the student is entitled to an offer of additional assessment of some type. The type of assessment is to be decided by the School Assessment Review Committee when determining final results. The student’s final total mark will be entered at no more than 49% and the offer of an additional assessment will be specified eg. US01. Once the additional assessment has been completed, this mark will be included in the calculation of the total mark for the course and the better of the two results will apply. Note however that the maximum final result for a course in which a student has sat an additional assessment will be a “50 Pass”.

If a student is unable to meet a hurdle requirement related to an assessment piece (may be throughout semester or at semester’s end) due to medical or compassionate circumstances beyond their control, then the student is entitled to an offer of replacement assessment of some type. An interim result of RP will be entered for the student, and the student will be notified of the offer of a replacement assessment. Once the replacement assessment has been completed, the result of that assessment will be included in the calculation of the total mark for the course.

It is important to note that there is no replacement assessment offered for the practical component.

Assessment Detail

See the notes for each assessment summary item in the table above.

Submission

All written submissions to assessment activities are to be submitted electronically on the specified date and must be accompanied by a signed cover sheet. Copies of blank cover sheets are available from the School office in IW 3.26.

Late submissions of the experimental reports will be accepted but with a 20% penalty per day (or part of). All formative and summative assessments will have a two week turn-around time for provision of feedback to students.

Full details can be found on the School website:

Course Grading

Grades for your performance in this course will be awarded in accordance with the following scheme:

M10 (Coursework Mark Scheme)
Grade	Mark	Description
FNS		Fail No Submission
F	1-49	Fail
P	50-64	Pass
C	65-74	Credit
D	75-84	Distinction
HD	85-100	High Distinction
CN		Continuing
NFE		No Formal Examination
RP		Result Pending

Further details of the grades/results can be obtained from Examinations.

Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.

Final results for this course will be made available through .

The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.

SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.

This section contains links to relevant assessment-related policies and guidelines - all university policies.

Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.

Authorised by:	Deputy Vice-Chancellor and Vice-President (Academic)
Maintained by:	Course Outlines Administrator

成人大片