PETROENG 2010 - Drilling Engineering
North Terrace Campus - Semester 1 - 2023
-
General Course Information
Course Details
Course Code PETROENG 2010 Course Drilling Engineering Coordinating Unit Australian School of Petroleum & Energy Resources Term Semester 1 Level Undergraduate Location/s North Terrace Campus Units 3 Contact Up to 5 hours per week Available for Study Abroad and Exchange Y Assumed Knowledge Introduction to Petroleum Engineering, Higher Maths, Physics, Chemistry, Fundamental laws of statics and dynamics, stress analysis, fluid flow through pipes and annulus Assessment Practical and tutorial reports and class tests Course Staff
Course Coordinator: Dr Alireza Salmachi
Course Timetable
The full timetable of all activities for this course can be accessed from .
There will be three hours of lectures each week and two hours of practical or tutorial each week. Each student will complete a total of four practicals, four tutorials and a group research project. You are expected to attend all sessions. -
Learning Outcomes
Course Learning Outcomes
On successful completion of this course students will be able to:
1 Explain key aspects of drilling operations, drill rig types and fundamental differences between onshore and offshore drilling. 2 Explain the mechanics and design of drill bits, how different drill bits function and key issues associated with drill bit selection. 3 Explain the process of mud preparation, circulation and cleaning, including understanding of mud types, mud chemistry and properties and the calculation of required pump rate and power. 4 Describe the purpose of downhole equipment used in drilling, including calculation of hole, pipe and annulus volumes. 5 Explain the concepts and equipment required in hoisting systems, including determination of loads and hoisting power. 6 Analyse critical safety parameters associated with drilling, such as safe drilling window, pore pressure, fracture pressure and collapse pressure. 7 Describe the hydraulics of mud flow through the borehole including calculation and application of hydraulics through the string, across the drill bit and up the annulus. 8 Explain the process and importance of casing design. 9 Apply key safety features in well control procedures. 10 Apply a critical-thinking and problem-solving approach towards the principles of drilling engineering.
The above course learning outcomes are aligned with the Engineers Australia .
The course is designed to develop the following Elements of Competency: 1.1 1.2 1.3 1.4 1.5 1.6 2.1 2.2 2.3 2.4
University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Attribute 1: Deep discipline knowledge and intellectual breadth
Graduates have comprehensive knowledge and understanding of their subject area, the ability to engage with different traditions of thought, and the ability to apply their knowledge in practice including in multi-disciplinary or multi-professional contexts.
10 Attribute 2: Creative and critical thinking, and problem solving
Graduates are effective problems-solvers, able to apply critical, creative and evidence-based thinking to conceive innovative responses to future challenges.
1,2,3,4,5,6,7,8,10 Attribute 4: Professionalism and leadership readiness
Graduates engage in professional behaviour and have the potential to be entrepreneurial and take leadership roles in their chosen occupations or careers and communities.
1,2,3,4,5,9 -
Learning Resources
Required Resources
There are no text books that are compulsory for this course.Recommended Resources
· “Applied Drilling Engineering” by A.T. Bourgoyne, Jr., et al., SPE textbook series, Vol. 2 (1991) (this is the primary textbook for the course).
I also recommend:
· “Drilling Engineering”, by A. A. Azar and G. Robello Samuel, PennWell Publisher, 2007
· “Volume II – Drilling Engineering”, by R. F. Mitchell, SPE Petroleum Engineering Handbook Series, 2006.
· “Advanced Drilling and Well Engineering”, by B. S. Aadnoy, I. Cooper, S.Z. Miska, R. F. Mitchell and M. L. Payne, published by SPE, 2009
· “Composition and Properties of Well Oil Drilling Fluids”, by G.R. Gray and H.C.H. Darley, Gulf Publishing Company
· “Oil Well Drilling Engineering: principles and practice”, by H. Rabia, Graham and Trotman Publisher, UK, 1985
· “Practical Well Planning and Drilling Manual”, By Steve Devereux, PennWell Publishing Limited, USA, 1998
· “Modern Well Design”, by Brent S. Aadnoy, A.A.Balkema, Rotterdam, Brookfield, 1996 · “Baroid Mud Technology Handbook” 1965 .“Petroleum Engineering Handbook for the Practicing Engineer: Volume 2” by M.A.Mian, PennWell Publishing Company, 1992.Online Learning
Most teaching materials will be provided through ‘MyUni’ and handouts during the lectures. Where possible, lectures will be recorded and made available on MyUni. A course discussion board will be available on MyUni. The discussion board is used to introduce practical and real problems occurring during drilling operation and students are asked to participate in an interactive discussion area to resolve drilling issues. The aim of the discussion board is to enhance students’ critical thinking and decision making abilities. -
Learning & Teaching Activities
Learning & Teaching Modes
This course provides students with a broad and focussed knowledge of drilling engineering. Weekly lectures are designed to give students a foundation for the broad range of drilling engineering topics, as well as to provide students with the detailed knowledge and skills needed in drilling engineering. The fundamental foundation material covered in the lectures is supported by hands-on learning in practicals and advanced problem-solving exercises in tutorials. Learning during lectures will be further supported by in class formative mini-quizzes and discussions. An interactive iBook has been developed specifically for this course to support and facilitate students learning experience.Workload
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
This course involves three sessions (50 minutes each) per week of lectures combined with a further 1 hour and 50 minute long practical/tutorial session.Learning Activities Summary
Schedule Week 1 Course overview, Introduction to drilling engineering, rotary drilling (Drill rigs, Rig power system). Week 2 Drilling Mud Week 3 Circulation system Week 4 Hoisting system and Rotary system Week 5 Drilling Hydraulics Week 6 Drilling Hydraulics and hydraulics optimization Week 7 Drill bits Week 8 Project presentations Week 9 Project presentations Week 10 Well control Week 11 Well control Week 12 Revision of course materials/previous year final exam Specific Course Requirements
Not applicable. -
Assessment
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Summary
* The specific due date for each assessment task will be available on MyUni.Assessment Task Weighting (%) Individual/ Group Formative/ Summative Due (week)* Hurdle criteria Learning outcomes Fortnightly tutorials 10 Individual Formative Weeks 2-12 1. 2. 3. 4. 5. 6. 7. 8. 9. Fortnightly practicals 10 Individual Formative Week 3-11 3. 7. Research project 30 Group Summative Week 9 & 10 10. Final exam 50 Min 45% 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Total 100
This assessment breakdown is registered as an exemption to the University's . The exemption is related to the Procedures clause(s).Assessment Related Requirements
You will be advised of the exact due dates for the tutorials and practicals in class. Tutorials and practicals will generally be due 1-2 weeks after the session. You will be advised about the exact date of mid term exam at the begining of the course.Assessment Detail
The course is assessed with the following weightings: Written Examination (50%), Tutorials (total of 10%), Practical reports (10%), Research project (30%).
There is a hurdle for the Final exam in this course. You must achieve at least 45 out of 100 in the Final exam to pass the course.Submission
Deadlines for submission will be given in class. Practical and tutorial assignments will be submitted online. The group exercise should be submitted as a written report online, plus the group will give a 15 minute oral summary, limited to one slide per group member.
Extensions for Assessment Tasks
Extensions of deadlines for assessment tasks may be allowed for reasonable causes. Such situations would include compassionate and medical grounds of the severity that would justify the awarding of a supplementary examination. Evidence for the grounds must be provided when an extension is requested. Students are required to apply for an extension to the Course Co-ordinator before the assessment task is due. Extensions will not be provided on the grounds of poor prioritising of time.
Penalty for Late Submission of Assessment Tasks
Assessment tasks must be submitted by the stated deadlines. There will be a penalty for late submission of assessment tasks. The submitted work will be marked ‘without prejudice’ and 10% of the obtained mark will be deducted for each working day (or part of a day) that an assessment task is late, up to a maximum penalty of 50% of the mark attained. An examiner may elect not to accept any assessment task that a student wants to submit after that task has been marked and feedback provided to the rest of the class. Deadlines for submission will be given in class. Practical and tutorial assignments will be submitted as paper hardcopies. The group exercise will be provided as an on-line wiki, plus the group will give a 15 minute oral summary, limited to one slide per group member.
Extensions for Assessment Tasks
Extensions of deadlines for assessment tasks may be allowed for reasonable causes. Such situations would include compassionate and medical grounds of the severity that would justify the awarding of a supplementary examination. Evidence for the grounds must be provided when an extension is requested. Students are required to apply for an extension to the Course Co-ordinator before the assessment task is due. Extensions will not be provided on the grounds of poor prioritising of time.
Penalty for Late Submission of Assessment Tasks
Assessment tasks must be submitted by the stated deadlines. There will be a penalty for late submission of assessment tasks. The submitted work will be marked ‘without prejudice’ and 10% of the obtained mark will be deducted for each working day (or part of a day) that an assessment task is late, up to a maximum penalty of 50% of the mark attained. An examiner may elect not to accept any assessment task that a student wants to submit after that task has been marked and feedback provided to the rest of the class.Course Grading
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through .
-
Student Feedback
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
Communication
It is important that all students maintain active communication channels throughout the year. The primary communication channels to students in this course are as follows.
MyUni: Students should regularly check the MyUni website ().
Email: Each student should regularly check his or her University-provided email account (firstname.lastname@student.adelaide.edu.au) for information from members of the academic staff concerning course work matters and other announcements as they arise. Make sure you clean up your Inbox regularly as if it is full you will not receive our email! We will regard an email message being sent to your student email address or an announcement posted on the MyUni site as our having communicated with each member of the class. Not reading one’s University provided email or MyUni announcements will not be a valid excuse for missing important deadlines etc. -
Student Support
- Academic Integrity for Students
- Academic Support with Maths
- Academic Support with writing and study skills
- Careers Services
- Library Services for Students
- LinkedIn Learning
- Student Life Counselling Support - Personal counselling for issues affecting study
- Students with a Disability - Alternative academic arrangements
-
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangements Policy
- Academic Integrity Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs Policy
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment Policy
- Reasonable Adjustments to Learning, Teaching & Assessment for Students with a Disability Policy
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
-
Fraud Awareness
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.
The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.
