成人大片

PETROENG 2009 - Formation Evaluation, Petrophysics & Rock Properties

North Terrace Campus - Semester 2 - 2024

The purpose of this theoretical and practical course is to introduce petrophysical and transport properties of rocks, methods of their determination in lab from cores and in oilfields from wireline logging. This course gives abilities to determine main rock properties in lab and practical understanding of the interpretation of wire line tools and techniques, open and cased hole log analysis methods for the determination of lithology, porosity, fluid content and movement, and net pay. Both, qualitative (quick look) and quantitative analyses methods are covered. Practical examples are used throughout and case histories are used to demonstrate specific aspects. Several laboratory works are performed for coring with determination of rock properties.

  • General Course Information
    Course Details
    Course Code PETROENG 2009
    Course Formation Evaluation, Petrophysics & Rock Properties
    Coordinating Unit Mining and Petroleum Engineering
    Term Semester 2
    Level Undergraduate
    Location/s North Terrace Campus
    Units 3
    Contact Up to 5 hours per week
    Available for Study Abroad and Exchange Y
    Assumed Knowledge PETROENG 1005, PETROENG 1006, PETROENG 2010
    Assessment Mid-course test, assignment, exam
    Course Staff

    Course Coordinator: Associate Professor Manouchehr Haghighi

    Course Timetable

    The full timetable of all activities for this course can be accessed from .

  • Learning Outcomes
    Course Learning Outcomes
    On successful completion of this course students will be able to:

    1 Describe different rock properties such as porosity and permeability based on basic definition
    2 Measure porosity and permeability of different rocks in Laboratory
    3 Identify the physics of logging tools
    4 Interpret individual wire-line log data
    5 Interpret different wire-line log data by cross-plotting
    6 Calculate hydrocarbon-in-place based on formation evaluation interpretation
    7 Define the fundamentals of special core analysis such as capillary pressure and relative permeability

     
    The above course learning outcomes are aligned with the Engineers Australia . The course develops the following EA Elements of Competency to levels of introductory (A), intermediate (B), advanced (C):  
     
    1.11.21.31.41.51.62.12.22.32.43.13.23.33.43.53.6
    A B A A A A B A B
    University Graduate Attributes

    This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:

    University Graduate Attribute Course Learning Outcome(s)

    Attribute 1: Deep discipline knowledge and intellectual breadth

    Graduates have comprehensive knowledge and understanding of their subject area, the ability to engage with different traditions of thought, and the ability to apply their knowledge in practice including in multi-disciplinary or multi-professional contexts.

    1-7

    Attribute 2: Creative and critical thinking, and problem solving

    Graduates are effective problems-solvers, able to apply critical, creative and evidence-based thinking to conceive innovative responses to future challenges.

    1-7

    Attribute 4: Professionalism and leadership readiness

    Graduates engage in professional behaviour and have the potential to be entrepreneurial and take leadership roles in their chosen occupations or careers and communities.

    4-6
  • Learning Resources
    Required Resources

    You are not required to buy any textbook. PowerPoints, charts and handouts will be distributed on MyUni including Santos lecture notes.

    Recommended Resources
    1. “Schlumberger Log Interpretation, Principles/Applications”, 1989
    2. “Schlumberger Log Interpretation Charts”, 1989
      There is enough number of Schlumberger books available in the library of ASP for borrowing.
    3. “The Geological Interpretation of Well Logs” by Malcolm Rider, second edition, Whittle Publishing, 1996
    4. “Petrophysics” second edition by Tiab and Donaldson; published by Gulf Professional Publishing, 2004.
    Online Learning

    PowerPoints, charts and handouts will be distributed on Myuni including lecture notes.

  • Learning & Teaching Activities
    Learning & Teaching Modes

    This course has 3 different sessions of lecture, tutorial, and practical.

    Workload

    The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

    A 3-unit course requires 156 hours and possibly some additional private study time.

    Learning Activities Summary
    • Week 1:
      • Introduction to formation evaluation and well logging
      • Definition of porosity
    • Week 2:
      • Definition of permeability
      • Archie’s law and subsurface environment
    • Week 3:
      • Calliper logs
      • Temperature logs and lab measurement of porosity
    • Week 4:
      • SP logs
      • Gamma ray logs and lab measurement of porosity
    • Week 5:
      • Sonic logs
    • Week 6:
      • Density logs
      • Neutron logs
    • Week 7:
      • Resistivity logs
      • Conductivity logs
    • Week 8:
      • Lithology identification (cross plotting)
    • Week 9:
      • Practical Log interpretation
    • Week 10:
      • Core analysis and lab measurement of permeability
    • Week 11:
      • Capillary Pressure, Wettability and lab measurement of permeability
    • Week 12:
      • Relative permeability
  • Assessment

    The University's policy on Assessment for Coursework Programs is based on the following four principles:

    1. Assessment must encourage and reinforce learning.
    2. Assessment must enable robust and fair judgements about student performance.
    3. Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
    4. Assessment must maintain academic standards.

    Assessment Summary
    Assessment Task Weighting (%) Individual/ Group Formative/ Summative
    Due (week)*
    Hurdle criteria Learning outcomes
    Assignments and completing tutes 25 Individual Formative Weeks 1-12 1,3,4,5,7
    practicals 10 Group Formative Weeks 5,10 2
    Quizes 25 Individual Summative Weeks 4, 8, 11 3,4,5,6,7
    Presentation and Report 10 Group Formative Week 12 6,7
    Final exam 30 Individual Summative Final Exam Period 3,4,5,7
    Total 100
    * The specific due date for each assessment task will be available on MyUni.
     
    This assessment breakdown is registered as an exemption to the University's . The exemption is related to the Procedures clause(s):
    Assessment Related Requirements

    Compulsory attendance at tutorials and practicals

    Assessment Detail

    No information currently available.

    Submission

    All homework assignments and practical reports need to be submitted at due date before the start of class.

    Home work assignments and practical reports need a cover sheet with student’s signature.

    Any late submission of homework and practical will be marked zero.

    Course Grading

    Grades for your performance in this course will be awarded in accordance with the following scheme:

    M10 (Coursework Mark Scheme)
    Grade Mark Description
    FNS   Fail No Submission
    F 1-49 Fail
    P 50-64 Pass
    C 65-74 Credit
    D 75-84 Distinction
    HD 85-100 High Distinction
    CN   Continuing
    NFE   No Formal Examination
    RP   Result Pending

    Further details of the grades/results can be obtained from Examinations.

    Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.

    Final results for this course will be made available through .

  • Student Feedback

    The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.

    SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.

  • Student Support
  • Policies & Guidelines
  • Fraud Awareness

    Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.

The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.