PETROENG 7038 - Well Testing & Pressure Transient Analysis
North Terrace Campus - Semester 2 - 2016
The course information on this page is being finalised for 2016. Please check again before classes commence.
-
General Course Information
Course Details
Course Code PETROENG 7038 Course Well Testing & Pressure Transient Analysis Coordinating Unit Australian School of Petroleum & Energy Resources Term Semester 2 Level Postgraduate Coursework Location/s North Terrace Campus Units 3 Contact Intensive short course of lectures, seminars Available for Study Abroad and Exchange Y Assumed Knowledge Relevant industry experience or courses equivalent to MATHS 1012, MATHS 2201, MATHS 2104, PHYSICS 1100, PETROENG 2009, MECH ENG 2021, PETROENG 3025, COMP SCI 1201 Assessment assignment, in class tests, final exam Course Staff
Course Coordinator: Prof Peter Behrenbruch
Course Timetable
The full timetable of all activities for this course can be accessed from .
-
Learning Outcomes
Course Learning Outcomes
1 Students will learn various techniques of pressure transient analysis, part of the reservoir engineering discipline. The course will be based on a mathematical foundation of partial differential equations. 2 Students will use real field data and will gain the understanding of how such data is obtained in the field, including accuracy and limitations. 3 Students will have tutorials and class exercises where they will work by themselves and in groups. 4 There will be group discussions and students may have to present their results. The benefit of interdisciplinary team work at the work place is stressed. 5 Students will learn about well test design and the modern hardware used in the field. 6 A number of technical papers will be handed out involving case histories and students will get an appreciation that the learning process never stops. 7 Some of the case histories will point out risks involved in well testing and how best engineering practice will minimise such risks. University Graduate Attributes
No information currently available.
-
Learning Resources
Required Resources
Text Book is optional (limited numbers may be available from the School office – ground floor):
Horne, Roland: Well Test Analysis: A Computer Aided Approach
Comprehensive class notes will be handed out, as well as a number of teaching aids related to computer exercises.Recommended Resources
A number of technical papers will be handed out for further reading. -
Learning & Teaching Activities
Learning & Teaching Modes
The breakdown for each day is approximately as follows (7 contact hours per day):
Theory: 1.5 hours
Analysis Techniques or Detailing of Operations/ Equipment: 1.5 hours
Case History: 1 hour
Tutorial/ Discussion: 1 hour
Exercise/ Quiz: 2 hoursWorkload
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
In addition to class work, students have reading assignments and take away assessment tasks on several days. Assignments are completed after the course and should take approximately 1-2 days to complete.Learning Activities Summary
Day 1:
I – Well Testing Course Outline and Course Conduct
L1 – Introduction
L2 – Overview
L3 Theoretical Foundation
GE – Derivation of Radial Diffusivity Equation: Group Exercise
GP – Group Presentation
AT1 – Briefing on Assessment Tasks
Day 2:
L4 – Well and Near Well Effects
L5 – Infinite Acting Reservoirs and Analysis
L6 – Infinite Acting Examples (see Textbook)
L7 – Analysis of Pressure Build-up: Infinite Acting Reservoirs
T – Build-up Analysis: Tutorial - Problem 1
Day 3:
L9 – Superposition Theory
L10 – Theory for Bounded Reservoirs
L8 – Analysis for Bounded Reservoirs
L11 – Field Examples – Dai Hung and Timor Sea
E1 – Interference Test Analysis: Exercise 2 - Problem 2
Day 4:
L12 – Gas Well Test Formulation
L13 – Gas Well Test Analysis
L14 – Well Test Design and Operations
L15 – Naturally Fractured Reservoirs (Dual Porosity)
E2 – Gas Well Test Analysis: Exercise 3 – Problem 3
D1 – Discussion on Testing Data, Reporting and Safety
Day 5:
L16 – Naturally Fractured Reservoirs: Examples
L17 – Computer-aided Analysis
L18 – Layered Reservoirs
L19 – Hydraulically Fractured Wells
AT1 – Start Assessment Tasks
Day 6:
L20 – (Hydraulically Fractured) Gas Wells: Examples
L21 – Introduction to Horizontal Well Tests
L22 – Introduction to Interference and Pulse Testing
QZ – Quiz
AT2 – Continue Assessment Tasks
Codes:
ATx – assessment tasks
I – introduction to course and expectations
Lx – lectures
Ex – exercises
GE – group exercise
GP – group presentation
Q - Quiz
T – tutorialSpecific Course Requirements
Students should spend some time on the weekend on their assessment tasks, to be able to seek possible clarification on the last day of class. -
Assessment
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Summary
There are three assessment tasks: in class quiz, assignment (started during classes) and the final exam.Assessment Related Requirements
Students are expected to attend all classes, tutorials and exercise sessions. The instructor may adjust the final mark of students based on class participation.Assessment Detail
The quiz examines concepts in well test analysis (short answers, multiple choice, fill in blanks etc.) and is close book and notes, lasting 45 minutes. The quiz is conducted in the afternoon of the last day and counts for 10% of the overall grading for the course.
The assignment involves several problems, using real field data. As such, these problems will be worked on by students on a limited basis during the course but are open ended. The due date of the assignment is 3 weeks after the final day of the course. The assignment counts for 40% of the overall course assessment, and a detailed mark breakdown by problem will be given at the time of the handout.
The final exam will be open book and notes. The exam will be held during the semester 2 exam period, date and time to be advised. The final exam counts for 50% of the overall course assessment.Submission
Assignments are to be submitted in hard and softcopy (details to be advised) to the assignment boxes on level 2 of the Santos Petroleum Engineering Building (by date to be advised). Unless medical or other serious circumstances apply, students may lose marks.Course Grading
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through .
Additional Assessment
All students who achieve a mark in the range of 45-49% are entitled to a form of additional assessment if they have not previously been offered redemption opportunities during the course. At the discretion of the School or Faculty, the assessment may take the form of an examination. -
Student Feedback
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
-
Student Support
- Academic Integrity for Students
- Academic Support with Maths
- Academic Support with writing and study skills
- Careers Services
- Library Services for Students
- LinkedIn Learning
- Student Life Counselling Support - Personal counselling for issues affecting study
- Students with a Disability - Alternative academic arrangements
-
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangements Policy
- Academic Integrity Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs Policy
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment Policy
- Reasonable Adjustments to Learning, Teaching & Assessment for Students with a Disability Policy
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
-
Fraud Awareness
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.
The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.
