PETROENG 7038 - Well Testing and Pressure Transient Analysis
North Terrace Campus - Semester 1 - 2024
-
General Course Information
Course Details
Course Code PETROENG 7038 Course Well Testing and Pressure Transient Analysis Coordinating Unit Mining and Petroleum Engineering Term Semester 1 Level Postgraduate Coursework Location/s North Terrace Campus Units 3 Contact Up to 4 hours per week Available for Study Abroad and Exchange Y Assumed Knowledge Relevant industry experience in Reservoir Engineering or courses equivalent to PETROENG 7059, MATHS 1012, MATHS 2201, MATHS 2104, PHYSICS 1100, PETROENG 2009, MECH ENG 2021, PETROENG 3025, COMP SCI 1201. Assessment Assignment, in class tests, final exam Course Staff
Course Coordinator: Associate Professor Abbas Zeinijahromi
Course Timetable
The full timetable of all activities for this course can be accessed from .
-
Learning Outcomes
Course Learning Outcomes
1 Select appropriate well testing methods and interpret tests' data 2 Describe the fundamentals behind all types of well test (DST, Formation Testing, Buildup, Interference and Pulse Tests, etc.) 3 Calculate the reservoir and well properties that can be obtained from various types of tests 4 Analyse data and assess strengths and limitations of well test interpretation 5 Derive long term production forecast from a short test
The above course learning outcomes are aligned with the Engineers Australia . The course develops the following EA Elements of Competency to levels of introductory (A), intermediate (B), advanced (C):
1.1 1.2 1.3 1.4 1.5 1.6 2.1 2.2 2.3 2.4 3.1 3.2 3.3 3.4 3.5 3.6 C C C C C C C C C C C B B B C C University Graduate Attributes
No information currently available.
-
Learning Resources
Required Resources
Text Book is optional (limited numbers may be available from the School office – ground floor):
Horne, Roland: Well Test Analysis: A Computer Aided Approach
Comprehensive class notes will be handed out, as well as a number of teaching aids related to computer exercises.Recommended Resources
Pressure Transient Testing’ by John Lee, John Rollins, John Spivey, SPE 2003 -
Learning & Teaching Activities
Learning & Teaching Modes
Lectures supported by problem-solving tutorials developing material covered in lecturesWorkload
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
12 half-day sessionsLearning Activities Summary
Overview and Introduction: Session 1
· Types of reservoir and well situations
· Types of Tests
· Fundamental concepts
Fluid Flow in Porous Media: Session 1-3
· Derivation of diffusivity equations
· Solutions to the diffusivity equations
· Radius of investigation
· Wellbore storage and skin
· Principle of superposition
Pressure Build-up Tests: Session 3-5
· Ideal and actual build-up tests for oil well (Horner method)
· Qualitative behaviour of field tests
· Effects and duration of after-flow
· Reservoir limit tests
· Analysis for gas well build-up tests
· Modification for multiphase flow
Well Flow Tests: Session 5-6
· Pressure drawdown tests for oil well
· Multi-rate tests
Well Tests Using Type Curves: Session 7-8
· Fundamental of type curves
· Ramey’s type curves
Gas Well Test Analysis: Session 9-10
· Basic theory of gas flow
· Flow-after-flow tests
· Isochronal tests
· Modified isochronal tests
Unusual Well Situations: Session 10
· Stimulated wells
· Horizontal wells
Advanced Well Testing Methods: Session 11
· Interference testing
· Pulse testing
Well tests in Naturally Fractured Reservoirs: Session 11-12
· Naturally fractured reservoir models
· Pseudo-steady-state matrix flow model
· Transient matrix flow model
Well Test Design: Session 12
· Time-rate schedule
· Pressure gauges
· Test string -
Assessment
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Summary
Assessment Task Task Type Due (week)* Weighting Learning Outcome Mid-course Exam (Paper) Summative TBD 20% Assignments x 2 Summative TBD 40% On-line Quiz Summative TBD 10% Final assessment (Paper) Summative TBD 30%
* The specific due date for each assessment task will be available on MyUni.Assessment Detail
Midterm Exam covers materials taught up to Mid-Semester break.
Final exam is comprehensive and covers all materials in the course.Submission
Submission of Work for Assessment
Practical and field class exercises should be submitted in hardcopy with a completed copy of the assessment coversheet that is available from the school office. This should be signed to indicate you have read the above university policy statement on plagiarism, collusion and related forms of cheating.
Extensions for Assessment Tasks
Extensions of deadlines for assessment tasks may be allowed for reasonable causes. Such situations would include compassionate and medical grounds of the severity that would justify the awarding of a supplementary examination. Evidence for the grounds must be provided when an extension is requested. Students are required to apply for an extension to the Course Co-ordinator before the assessment task is due. Extensions will not be provided on the grounds of poor prioritising of time.
Penalty for Late Submission of Assessment Tasks
Assessment tasks must be submitted by the stated deadlines. There will be a penalty for late submission of assessment tasks. The submitted work will be marked ‘without prejudice’ and 10% of the obtained mark will be deducted for each working day (or part of a day) that an assessment task is late, up to a maximum penalty of 50% of the mark attained. An examiner may elect not to accept any assessment task that a student wants to submit after that task has been marked and feedback provided to the rest of the claCourse Grading
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through .
-
Student Feedback
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
-
Student Support
- Academic Integrity for Students
- Academic Support with Maths
- Academic Support with writing and study skills
- Careers Services
- Library Services for Students
- LinkedIn Learning
- Student Life Counselling Support - Personal counselling for issues affecting study
- Students with a Disability - Alternative academic arrangements
-
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangements Policy
- Academic Integrity Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs Policy
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment Policy
- Reasonable Adjustments to Learning, Teaching & Assessment for Students with a Disability Policy
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
-
Fraud Awareness
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.
The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.
