GEOLOGY 3016 - Igneous and Metamorphic Geology III

North Terrace Campus - Semester 1 - 2019

This course examines the origin and evolution of igneous and metamorphic rocks. It focuses on both descriptive work and theoretical background related to rock formation and development. Igneous Geology: This section examines the controls on the generation and differentiation of silicate melts within the earth and the contribution these processes have made to the composition of the crust and mantle through time. It also uses the basis of elemental and isotope geochemistry to understand these processes. We examine case studies of magma generation in key tectonic settings on the earth through time. Metamorphic Geology: This examines the nature and change of sub-solidus mineral assemblages and textures in rocks. This information provides a sound basis with which to examine orogenic processes.

Open All

Course Details

Course Code	GEOLOGY 3016
Course	Igneous and Metamorphic Geology III
Coordinating Unit	School of Physical Sciences
Term	Semester 1
Level	Undergraduate
Location/s	North Terrace Campus
Units	3
Contact	Up to 7 hours per week
Available for Study Abroad and Exchange	Y
Prerequisites	GEOLOGY 2502
Assessment	Practical report, exam, practical test

Course Staff

Course Coordinator: Professor Karin Barovich

Course Timetable

The full timetable of all activities for this course can be accessed from .

Course Learning Outcomes

A successful student in this course should be able to:
1	Demonstrate proficiency in common practical skills in igneous and metamorphic geology;
2	Understand how the occurrence and character of different igneous and metamorphic rock suites is governed by and reflects the Earth's tectonic processes;
3	Explain how magma is generated in the Earth's mantle and how magma typically evolves;
4	Be able to organise, plot and evaluate the petrogenesis of igneous rock suites using elemental data;
5	Understand different geochronological and isotope geochemical techniques and their applications to igneous and metamorphic processes;
6	Explain how absolute pressure-temperature information is extracted from rock using thermodynamic expressions.

University Graduate Attributes

This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:

University Graduate Attribute	Course Learning Outcome(s)
Deep discipline knowledge informed and infused by cutting edge research, scaffolded throughout their program of studies acquired from personal interaction with research active educators, from year 1 accredited or validated against national or international standards (for relevant programs)	1-6
Critical thinking and problem solving steeped in research methods and rigor based on empirical evidence and the scientific approach to knowledge development demonstrated through appropriate and relevant assessment	1-6
Teamwork and communication skills developed from, with, and via the SGDE honed through assessment and practice throughout the program of studies encouraged and valued in all aspects of learning	1, 5
Career and leadership readiness technology savvy professional and, where relevant, fully accredited forward thinking and well informed tested and validated by work based experiences	1, 4
Intercultural and ethical competency adept at operating in other cultures comfortable with different nationalities and social contexts able to determine and contribute to desirable social outcomes demonstrated by study abroad or with an understanding of indigenous knowledges	not addressed
Self-awareness and emotional intelligence a capacity for self-reflection and a willingness to engage in self-appraisal open to objective and constructive feedback from supervisors and peers able to negotiate difficult social situations, defuse conflict and engage positively in purposeful debate	1, 4, 5

Learning Resources

Recommended Resources

WINTER, J.D. (2008) Principles of Igneous and Metamorphic Petrology (2nd edition). Prentice Hall, pp. 766. ISBN 0-321-59257-3.
SPEAR, F.S. (1993) Metamorphic phase equilibria and pressure-temperature-time paths. MONOGRAPH. Mineralogical Society of America, Washington, D.C., pp. 799. ISBN 0-939950-34-0.
BARKER, A. J. (1998) Introduction to metamorphic textures and microstructures (Second Edition). Stanley Thornes (Publishers) Ltd., pp. 264. ISBN 0-7487-3985-8.
YARDLEY, B.W.D., MACKENZIE, W.S. & GUILFORD, C. (1990) Atlas of metamorphic rocks and their textures. Longman Scientific and Technical, Harlow, Essex, pp. 120. ISBN 0-582-30166-1
YARDLEY, B.W.D. (1989) An Introduction to Metamorphic Petrology. Addison Wesley Longman, Edinburgh Gate, Harlow, Essex, pp. 248. ISBN 0-582-30096-7.
VERNON, R. H., CLARKE, G.L. (2008) Principles of metamorphic petrology. Cambridge University Press, pp. 446. ISBN 978-0-521-87178-5.
MCBIRNEY, A., 1993: Igneous petrology 2nd Edition. Jones & Bartlett Publishers.
FAURE, G., 1986. Principles of isotope geology, 2nd edition, Wiley and Sons.
ROLLINSON., H. 1993. Using geochemical data: evaluation, presentation, interpretation. Longman.

Online Learning

Additional course-related material is available through the online course webpage, MyUni(Canvas). MyUni(Canvas) is the primary form of communication with students in the course and hence students should regularly check the website for important course-related
announcements. Teaching materials, reminders and course documentation will also be posted on this site.

Learning & Teaching Modes

The course consists of:

2 or 3 hours of lectures/week
1 x 4-hour practical class per week

Due to high enrolment numbers there are repeat practical classes per week

Workload

The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

A student enrolled in a 3 unit course, such as this, should expect to spend, on average 12 hours per week on the studies required. This includes both the formal contact time required to the course (e.g., lectures and practicals), as well as non-contact time (e.g., reading and revision)

Learning Activities Summary

**Schedule**
Week	Lecture	Practical
1	Review of minerals and igneous rocks and processes from Ig Met Geology 2	Revise igneous minerals and rocks in hand specimen and thin section, intro to igneous chemical data manipulation
2	High temperature geochemistry: geochemical behaviour of the elements-Magmatic Differentiation and Major Elements-Trace elements and element partitioning, variation due to melting or fractionation	Geochemical data manipulation continued
3	Isotope geology: The isotope evolution (Nd, Sr, Pb, Hf) in igneous processes and sources and geochronology (isochrons, tracers)	Mafic rocks practical
4	Mantle melting and basalts	Subduction magmatism practical
5	Subduction	Granites practical
6	Granites	Work on Practical project
7	Igneous geology short exam (lecture slot)	Refresher + (re)introduction to metamorphic minerals and mineral reactions in metapelitic & metabasic rocks
8	Review of Metm II Introduction to petrography	Petrography/petrology of metapelitic and metabasic rocks
9	Petrography Part 3 Introduction to thermobarometry	Petrography/petrology of metapelitic and metabasic rocks
10	Introduction to thermobarometry Mineral zoning, diffusion and geo-speedometry	Petrography/petrology of metapelitic and metabasic rocks
11	Mineral zoning, diffusion and geo-speedometry Heat flow, heat sources in the continental crust and subduction metamorphism	Petrography/petrology of metapelitic and metabasic rocks
12	Pressure temperature-time paths Role of fluids during metamorphism	Petrography review session
13	Mineralisation and metamorphism – the sulfur connection Constraining absolute rates in metamorphic systems (geochronology)	Practical assignment due on Metamorphic Petrography

Specific Course Requirements

Attendance is compulsory at all scheduled Igneous and Metamorphic Geology III practical sessions. The learning outcomes for this course are substantially dependent on petrographic practice. Therefore, missing any practical class in a semester will result in a grade of FAIL being recorded for the course. Students are able to apply for an allowed absence from a practical session for
medical or compassionate reasons by submitting an absence form with appropriate supporting documentation to the course coordinator. Application forms can be downloaded from the MyUni course website.

The University's policy on Assessment for Coursework Programs is based on the following four principles:

Assessment must encourage and reinforce learning.
Assessment must enable robust and fair judgements about student performance.
Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
Assessment must maintain academic standards.

Assessment Summary

Assessment Task	Task Type	Percentage of total assessment	Hurdle Yes/No	Learning Outcome	Due Date
Igneous processes practical work	Summative	20%	No	1-6	Weeks 2-8
Practical assignment (metamorphic)	Summative	20%	No	1-6	Week 12 or 13
Mid-semester Igneous geology exam	Summative	30%	No	1-6	Mid-semester
Mid-year Metamorphic geology exam	Summative	30%	No	1-6	Mid year exam period

Assessment Related Requirements

Attendance is compulsory at all scheduled practical is compulsory. The learning outcomes for this course are substantially
dependent on this hands-on experience and practice. Therefore, missing any practical class session in a semester without an allowed
absence will result in a grade of FAIL being recorded for the course.

Assessment Detail

Igneous geology prac work (20%)
project work.

Metamorphic Practical assignment (20%)
This assignment covers the content in the metamorphic practicals to that time.

Mid-semester Igneous geology exam (30%)
During a lecture slot. Examines all Igneous geology course content.

Mid-Year Metamorphic geology Exam (30%)
An exam during the mid-year exam period. Examines all metamorphic geology course content.

Submission

If an extension is not applied for, or not granted then a penalty for late submission will apply. A penalty of 10% of the value of the assignment for each calendar day that is late (i.e. weekends count as 2 days), up to a maximum of 50% of the available marks will be applied. This means that an assignment that is 5 days or more late without an approved extension can only receive a maximum of 50% of the mark

Course Grading

Grades for your performance in this course will be awarded in accordance with the following scheme:

M10 (Coursework Mark Scheme)
Grade	Mark	Description
FNS		Fail No Submission
F	1-49	Fail
P	50-64	Pass
C	65-74	Credit
D	75-84	Distinction
HD	85-100	High Distinction
CN		Continuing
NFE		No Formal Examination
RP		Result Pending

Further details of the grades/results can be obtained from Examinations.

Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.

Final results for this course will be made available through .

Student Feedback

The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.

SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
Student Support
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
Fraud Awareness

Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.

The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.

Authorised by:	Deputy Vice-Chancellor and Vice-President (Academic)
Maintained by:	Course Outlines Administrator

成人大片