MECH ENG 2021 - Thermo-Fluids I

North Terrace Campus - Semester 1 - 2015

An introduction to mechanical engineering thermodynamics dealing with the application of the first and second laws of thermodynamics to the thermodynamic design and performance analysis of typical thermo-mechanical plant using condensable vapours and gases as the working fluid. Basic fluid mechanics including: kinematics and dynamics of fluid flows; conservation laws applied to fluid flow; Euler, Bernoulli, Navier-Stokes equations; dimensional analysis; differential and integral flow analysis; flow visualisation.

Open All

Course Details

Course Code	MECH ENG 2021
Course	Thermo-Fluids I
Coordinating Unit	School of Mechanical Engineering
Term	Semester 1
Level	Undergraduate
Location/s	North Terrace Campus
Units	3
Contact	Up to 7 hours per week
Available for Study Abroad and Exchange	Y
Assumed Knowledge	MATHS 1011 & MATHS 1012, C&ENVENG 1010 & MECH ENG 1007
Restrictions	BE(Mechanical & Aerospace), BE(Mechanical & Automotive), BE(Computational), BE(Mechanical), BE(Mechatronic), BE(Petroleum), BE (Mechanical & Sports), BE(Sustainable Energy), BE(Mining), BE(Architectural) and associated double & combined degree students
Assessment	assignments, practicals, final exam

Course Staff

Course Coordinator: Dr Zhao Tian

Name	Role	Building/Room	Email
Mr Gareth Bridges	Lecturer--Thermodynamics	Engineering Maths Building, EM206	gareth.bridges@adelaide.edu.au
Mr Eyad Hassan	Lecturer-- Fluid Mechanics	Engineering South Building, S324G	eyad.hassan@adelaide.edu.au

Course Timetable

The full timetable of all activities for this course can be accessed from .

Course Learning Outcomes

On the completion of this course students are expected to be able to:

1	Be conversant with the concepts and definitions used in fluid mechanics and thermodynamics;
2	Understand and be able to apply fundamental concepts and equations to practical problems;
3	Have a good understanding of basic thermodynamics and its importance in thermal systems;
4	Have a good understanding of basic gas laws and phase change processes;
5	Have a deep understanding of the different forms of energy, its transfer and the laws that controls this transfer;
6	Have a good understanding of basic ideal thermal cycles and their application to daily life;
7	Be equipped with the knowledge of environmentally responsible and current best practice for the design of efficient thermal system and cycles;
8	Have developed analytical cognitive skills and problem solving skills in thermodynamics and fluid mechanics.

University Graduate Attributes

This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:

University Graduate Attribute	Course Learning Outcome(s)
Knowledge and understanding of the content and techniques of a chosen discipline at advanced levels that are internationally recognised.	1-8
The ability to locate, analyse, evaluate and synthesise information from a wide variety of sources in a planned and timely manner.	1-8
An ability to apply effective, creative and innovative solutions, both independently and cooperatively, to current and future problems.	1-8
A commitment to continuous learning and the capacity to maintain intellectual curiosity throughout life.	1-8
A commitment to the highest standards of professional endeavour and the ability to take a leadership role in the community.	1-8

Learning Resources
Required Resources
- Two parts of Thermo-Fluids 1 Lecture Notes: Thermodynamics part and Fluid Mechanics parts, and Level 2 Labbook – all available from the Image & Copy Centre.
- Moran, M.J., Shapiro, H.N., D. D. Boettner & Bailey, M. B., Fundamentals of Engineering Thermodynamics, John Wiley and Sons Inc, 7th Edition 2011 Wiley
Recommended Resources
- Munson, Young, Okiishi & Huebsch, Fundamentals of Fluid Mechanics, John Wiley and Sons Inc, 6th Edition 2009 (or earlier editions)
The Barr Smith library has many books which are concerned with Thermodynamics and Fluid Mechanics. Students are encouraged to consult these books to enrich their knowledge in both topics.
Online Learning
The material available through MyUni:
- Course Outline and Introduction
- Course Content
- Timetable
- Lecture Notes
- Assignments
- Tutorials
- Solutions
- Past exams
- Level II Lab book
MyUni is also used to communicate important announcements.

Learning & Teaching Modes

Lectures supported by modes developing material covered in lectures. These modes include problem-solving tutorials and a laboratory.

Workload

The information below is provided as a guide to assist students in engaging appropriately with the course requirements.

Course workload includes 48 hours lectures and tutorials, and 3 hours laboratory.

Learning Activities Summary

This course consists of combination of lectures and tutorials:

Thermodynamics:
Introductory Thermodynamic Concepts Energy Model Definitions Problem Solving Methodology Engineering Design	(2 hrs lectures)
Energy Mechanical Concepts of Energy: KE, PE, Work Energy of a System	(1 hr lectures)
Energy Transfer and the First Law of Thermodynamics Energy Transfer by Heat Heat Transfer Modes Energy Balance of Closed Systems Energy Analysis of Cycles	(1 hrs lectures, 1 hr tutorial)
Properties of a Pure, Simple Compressible Substance State Principle p-v-T Relation Thermodynamic Property Data p-v-T Relation for Gases Ideal Gas Model	(3 hrs lectures, 1 hr tutorial)
Control Volume Analysis Conservation of Mass for a Control Volume Conservation of Energy for a Control Volume Analysis of Control Volumes at Steady State Examples of Several Important Devices Nozzles and Diffusers Turbines Compressors and Pumps Heat Exchangers Throttling Devices - Throttling Calorimeter Transient Analysis	(2 hrs lectures, 1 hr tutorial)
Second Law of Thermodynamics Work and Processes Statements of the Second Law Reversible and Irreversible Processes	(1 hr lecture)
Second Law Corollaries for Thermodynamic Cycles Energy Analysis of Thermodynamic Cycles Limitations on Power Cycles Limitations on Refrigeration and Heat Pump Cycles Kelvin Temperature Scale	(1 hr lectures)
Cycle Performance Measures and the Carnot Cycle Maximum Performance of Power Cycles Maximum Performance of Refrigeration and Heat Pump Cycles The Carnot Cycle	(1 hr lectures, 1 hr tutorial))
Entropy Clausius Inequality Definition of Entropy Change Entropy of Pure, Simple Substances Entropy Change in Internally Reversible Processes Entropy Balance for Closed Systems Entropy Rate Balance for Control Volumes Isentropic Processes Isentropic Efficiency Heat Transfer and Work in Internally Reversible Steady Flow Processes	(4 hrs lectures, 1 hr tutorial)
Exergy (Availability) Introduction to Exergy Evaluation (Derivation) Exergy Balances for Closed Systems Flow Exergy Exergy Rate Balance for Control Volumes Second Law Efficiency	(2 hrs lectures, 1 hr tutorial)

Fluid Mechanics:
Introduction & Basics Definitions Fluid Properties Units Problem Solving Methodology	1 hr lecture
Hydrostatics Introduction and Pascal's Law Pressure - A Scalar Term Pascal's Law for Pressure at a Point Pressure Variation with Depth Gauge Vs Absolute Pressure Manometry Forces on Plane Submerged Surfaces Subjected to Uniform Pressure Forces on Plane Submerged Surfaces Definitions of Centroid & Centre of Pressure Forces on Curved Surfaces Buoyancy	2 hrs lectures + 1 hr tutorial
Kinematics, Continuity & C.V. Analysis Flow Regimes: Laminar & Turbulent Flow in Pipes Describing Fluid Flow: Lagrangian Description, Eulerian Description Steady & Unsteady Flow Reference Frame and the Galilean Transformation Flow Lines Streamline Coordinate System Flow Dimensionality and Directionality Intensive and Extensive Parameters Material (Total/Lagrangian/Substantive) Derivative – Acceleration The Helmholtz Theorem Rotation, Angular Velocity and Vorticity Rate of Shear Deformation Rate of Volumetric Strain Control Volumes and Systems Reynolds Transport Theorem Conservation of Mass: Integral & Differential Continuity Flow Rate and Average Velocity	3 hrs lectures + 1 hr tutorial
Energy & Bernoulli Equations, Equations of Motion The General Energy Equation Average Properties and Velocities The General Energy Equation for a Streamline The Mechanical Energy Equation Bernoulli's Equation Pressure Coefficient or Euler Number Stagnation Pressure Pitot-Static Tubes Yaw Meters Venturi Flow Meters Equations of Motion:Euler's, Cauchy &Navier-Stokes Equations	3 hrs lecture + 1 hr tutorial
Dimensional Analysis, Similitude & Modelling Dimensional Homogeneity Buckingham's Π-Theorem Standard Π- Groups Dimensional Reasoning Dimensional Analysis by Inspection Physical Similarity: Geometric ,Kinematic &Dynamic Complete & Incomplete Physical Similarity	2 hrs lecture + 1 hr tutorial
Linear Momentum, Angular Momentum Derivation of the Linear Momentum Equation Terms in the Linear Momentum Equation Problem Solving Moving and Deforming Control Volumes Relative Velocity Derivation of the Angular Momentum Equation	2 hrs lecture + 1 hr tutorial
Turbomachinery and Turbomachine Performance Classes of Turbomachines Derivation of Euler's Pump and Turbine Equation Centrifugal Pumps and Fans-Simplifications Axial Flow Fans, Pumps and Turbines Departures from Euler's theory Three-dimensionalities Losses Energy Balance for Turbomachines Performance Curves of Turbomachines Performance Characteristics of Turbomachines	2 hrs lecture + 1 hr tutorial
Summary & Exam	1 hr lecture

Specific Course Requirements

Laboratory: This course includes a laboratory: Flow Visualisation – 3 hrs. Details provided in level 2 Labbook.

The University's policy on Assessment for Coursework Programs is based on the following four principles:

Assessment must encourage and reinforce learning.
Assessment must enable robust and fair judgements about student performance.
Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
Assessment must maintain academic standards.

Assessment Summary

All learning objectives are assessed through assignments, laboratories and examination.

For 2014, Fluid mechanics: Assignments 20%, laboratory 10%, final exam 70%

Thermodynamics: Assignments 30%, final exam 70%

Assessment Related Requirements

The Laboratory is compulsory part of a course. If a lab session is missed or a lab report not handed in or a student fails to get at least 35% of the total possible lab marks, then that is grounds for FAILURE of the entire course.

Assessment Detail

Assignments – individual, distributed through the semester at least two weeks prior to a submission date

Laboratory – assessment based on lab participation and a report (COMPULSORY component)

Final exam – open-book, 3 hours,

Submission

Assignments and lab reports should be submitted via corresponding Course Submission Box located on Level 2 of Engineering South. No late submissions are accepted although in special cases exemptions can be granted on individual basis. A “turn-around” timeline on assessments and the provision of feedback to students is approximately 2 weeks. Re-submission of work is not allowed.

Course Grading

Grades for your performance in this course will be awarded in accordance with the following scheme:

M10 (Coursework Mark Scheme)
Grade	Mark	Description
FNS		Fail No Submission
F	1-49	Fail
P	50-64	Pass
C	65-74	Credit
D	75-84	Distinction
HD	85-100	High Distinction
CN		Continuing
NFE		No Formal Examination
RP		Result Pending

Further details of the grades/results can be obtained from Examinations.

Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.

Final results for this course will be made available through .

Student Feedback

The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.

SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
Student Support
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
Fraud Awareness

Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.

The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.

Authorised by:	Deputy Vice-Chancellor and Vice-President (Academic)
Maintained by:	Course Outlines Administrator

成人大片