C&ENVENG 3012 - Geotechnical Engineering Design III
North Terrace Campus - Semester 2 - 2018
-
General Course Information
Course Details
Course Code C&ENVENG 3012 Course Geotechnical Engineering Design III Coordinating Unit School of Civil, Environmental & Mining Eng Term Semester 2 Level Undergraduate Location/s North Terrace Campus Units 3 Contact Up to 4 hours per week Available for Study Abroad and Exchange Y Prerequisites C&ENVENG 2069 Restrictions Available to BE(Civil & Struct), BE (Honours) (Civil & Environmental), BE(Architectural) & associated double degree students only Assessment exams 60%, coursework 40% Course Staff
Course Coordinator: Emeritus Professor Mark Jaksa
Lecturers: Prof. Mark Jaksa, Mr. Brendan Scott
Design Sessions: Mr. Brendan Scott, Dr. Matthew Duthy, Dr. Issa Kousa, Irene Chung
Practical Coordinator: Dr. Issa Kousa
Course Timetable
The full timetable of all activities for this course can be accessed from .
A full timetable will be available to students through MyUni.
Students need to enrol in the practical sessions. Practicals are held in the Geotechnical Engineering Laboratories, Ground Floor, Engineering Annex. Schedules and group numbers will be posted on MyUni. -
Learning Outcomes
Course Learning Outcomes
On successful completion of this course students will be able to:
1 Interpret and summarise desktop information to predict the expected soil and groundwater conditions prior to undertaking a site investigation; 2 Demonstrate the ability to scope and plan site investigations that are feasible, cost effective and appropriately characterise the ground; 3 Demonstrated ability to develop an idealised geotechnical model that summarises the ground profile and identifies and quantifies key parameters needed for design; 4 Calculate lateral earth pressures, loading induced stresses and displacements, and bearing capacity of shallow foundations; 5 Design retaining walls, foundations and pavements, and analyse the stability of slopes; 6 Evaluate design options and specify final design recommendations based on factors such as sustainability, construction feasibility and cost effectiveness; 7 Demonstrated ability to communicate designs visually using computer aided drawings; 8 Measure soil properties in the laboratory and interpret and summarise the data.
The above course learning outcomes are aligned with the Engineers Australia .
The course is designed to develop the following Elements of Competency: 1.1 1.2 1.3 1.5 1.6 2.1 2.2 2.3 2.4 3.1 3.2 3.3 3.4 3.5 3.6
University Graduate Attributes
This course will provide students with an opportunity to develop the Graduate Attribute(s) specified below:
University Graduate Attribute Course Learning Outcome(s) Deep discipline knowledge
- informed and infused by cutting edge research, scaffolded throughout their program of studies
- acquired from personal interaction with research active educators, from year 1
- accredited or validated against national or international standards (for relevant programs)
1-8 Critical thinking and problem solving
- steeped in research methods and rigor
- based on empirical evidence and the scientific approach to knowledge development
- demonstrated through appropriate and relevant assessment
1-8 Teamwork and communication skills
- developed from, with, and via the SGDE
- honed through assessment and practice throughout the program of studies
- encouraged and valued in all aspects of learning
1-8 Career and leadership readiness
- technology savvy
- professional and, where relevant, fully accredited
- forward thinking and well informed
- tested and validated by work based experiences
1-8 Self-awareness and emotional intelligence
- a capacity for self-reflection and a willingness to engage in self-appraisal
- open to objective and constructive feedback from supervisors and peers
- able to negotiate difficult social situations, defuse conflict and engage positively in purposeful debate
5, 6, 8 -
Learning Resources
Required Resources
Electronic copies of lecture notes and other relevant learning resources, such as copies of PowerPoint slides and recordings of lectures, will be made available to students, at no cost, via MyUni.
In addition, hard copies of lecture notes can be purchased from 'Image and Copy'.
Recommended Resources
Students are encouraged to purchase text books; they will be beneficial for this course (although not essential).
Recommended text books:
Atkinson, J., The Mechanics of Soils and Foundations, 2nd ed., 2007, Spon Press.
Knappett, J. A. and Craig, R. F., Craig's Soil Mechanics, 8th ed., 2012, Spon Press.
Smith, I., Smith's Elements of Soil Mechanics, 9th ed., 2014, John Wiley and Sons Ltd.
Online Learning
MyUni will be used to disseminate learning resources and information relevant to the course. Online learning modules will be used to assist your preparation for laboratory experiments and these are available on MyUni. In addition, the MyUni Discussion Boards and Gradebook will also be utilised in this course.
-
Learning & Teaching Activities
Learning & Teaching Modes
The course involves the following teaching and learning approaches:
Lectures
Tutorials
Software and physical demonstrations
Design sessions
Practical classes
Examination
Workload
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
The information below is provided as a guide to assist students in engaging appropriately with the course requirements.
Activity Contact Hours Independent Study Hours Total Lectures & interactive learning modules 27 50 77 Design Project reports (x3, formative) 12 40 52 In-class problem set questions 6 12 18 Practicals (x3, formative) 3 9 12 Assignments (x4, formative) 0 16 16 Exam (x1, summative) 3 50 53 Total 51 177 228
Attendance at lectures, design sessions and practical classes is expected.Learning Activities Summary
The course examines the following topics:
- site investigations and in situ testing;
- lateral earth pressures and retaining wall design;
- foundation design;
- loading induced stresses and displacements;
- bearing capacity of shallow foundations;
- design of shallow foundations;
- analysis and design of pile foundations;
- pavement design; and
- stability of slopes.
-
Assessment
The University's policy on Assessment for Coursework Programs is based on the following four principles:
- Assessment must encourage and reinforce learning.
- Assessment must enable robust and fair judgements about student performance.
- Assessment practices must be fair and equitable to students and give them the opportunity to demonstrate what they have learned.
- Assessment must maintain academic standards.
Assessment Summary
* The specific due date for each assessment task will be available on MyUni.Assessment Task Weighting (%) Individual/ Group Formative/ Summative Due (week)* Hurdle criteria Learning outcomes Examination 60 Individual Summative Exam period Min 40% 1. 2. 3. 4. 5. 6. Design Project (3 phases) 20 Group Formative Refer to MyUni 1. 2. 3. 4. 5. 6. 7. Practical reports (3 of) 10 Group Formative Two weeks after the lab session 8. Tutorial assignments (4 of) 10 Individual Formative Two weeks after being assigned 4. 5. 6. Total 100
This assessment breakdown complies with the University's Assessment for Coursework Programs Policy.
This course has a hurdle requirement. Meeting the specified hurdle criteria is a requirement for passing the course.Assessment Related Requirements
The tutorials will be individual submissions, whereas the design and practical reports will be submitted as a group – one submission per group. Students will be assigned to practical groups with up to 4 students in each group. Students will be able to choose their own design project groups, but the total number of persons in each group should not be less than 5 and not greater than 6.
Assessment Detail
Further details of each assignment will be provided in lectures and via MyUni well before the due date.
Submission
All tutorials must be submitted electronically on MyUni. Design project and practical reports must be submitted in the course submission box in front of the School of Civil, Environmental and Mining Engineering Office (Eng. North N136) at or before 5pm on the nominated due date.
Late submissions will be penalised at the rate of 10% per day unless an extension was granted by the course coordinator prior to the nominated due date due to medical or extenuating circumstances. Any requests for extensions must be communicated via email prior to the deadline. No credit will be given for submissions received more than five working days after the nominated due date unless an extension was granted by the course coordinator.
Course Grading
Grades for your performance in this course will be awarded in accordance with the following scheme:
M10 (Coursework Mark Scheme) Grade Mark Description FNS Fail No Submission F 1-49 Fail P 50-64 Pass C 65-74 Credit D 75-84 Distinction HD 85-100 High Distinction CN Continuing NFE No Formal Examination RP Result Pending Further details of the grades/results can be obtained from Examinations.
Grade Descriptors are available which provide a general guide to the standard of work that is expected at each grade level. More information at Assessment for Coursework Programs.
Final results for this course will be made available through .
-
Student Feedback
The University places a high priority on approaches to learning and teaching that enhance the student experience. Feedback is sought from students in a variety of ways including on-going engagement with staff, the use of online discussion boards and the use of Student Experience of Learning and Teaching (SELT) surveys as well as GOS surveys and Program reviews.
SELTs are an important source of information to inform individual teaching practice, decisions about teaching duties, and course and program curriculum design. They enable the University to assess how effectively its learning environments and teaching practices facilitate student engagement and learning outcomes. Under the current SELT Policy (http://www.adelaide.edu.au/policies/101/) course SELTs are mandated and must be conducted at the conclusion of each term/semester/trimester for every course offering. Feedback on issues raised through course SELT surveys is made available to enrolled students through various resources (e.g. MyUni). In addition aggregated course SELT data is available.
-
Student Support
- Academic Integrity for Students
- Academic Support with Maths
- Academic Support with writing and study skills
- Careers Services
- Library Services for Students
- LinkedIn Learning
- Student Life Counselling Support - Personal counselling for issues affecting study
- Students with a Disability - Alternative academic arrangements
-
Policies & Guidelines
This section contains links to relevant assessment-related policies and guidelines - all university policies.
- Academic Credit Arrangements Policy
- Academic Integrity Policy
- Academic Progress by Coursework Students Policy
- Assessment for Coursework Programs Policy
- Copyright Compliance Policy
- Coursework Academic Programs Policy
- Intellectual Property Policy
- IT Acceptable Use and Security Policy
- Modified Arrangements for Coursework Assessment Policy
- Reasonable Adjustments to Learning, Teaching & Assessment for Students with a Disability Policy
- Student Experience of Learning and Teaching Policy
- Student Grievance Resolution Process
-
Fraud Awareness
Students are reminded that in order to maintain the academic integrity of all programs and courses, the university has a zero-tolerance approach to students offering money or significant value goods or services to any staff member who is involved in their teaching or assessment. Students offering lecturers or tutors or professional staff anything more than a small token of appreciation is totally unacceptable, in any circumstances. Staff members are obliged to report all such incidents to their supervisor/manager, who will refer them for action under the university's student鈥檚 disciplinary procedures.
The 成人大片 is committed to regular reviews of the courses and programs it offers to students. The 成人大片 therefore reserves the right to discontinue or vary programs and courses without notice. Please read the important information contained in the disclaimer.
